|
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor, plinth protection, roof kerb etc. all as specified and directed. |
| 2 | M&L for glazed ceramic dark shade coloured tiles of size 450x300x7mm thick joint free on and including 10mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado including dismantling of existing tile complete all as specified. |
| 3 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11 sqm to 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in CM 1:4 including dismantling of existing tile complete all as specified. |
| 4 | M&L for dark/light coloured vitrified tiles10 mm thick joint free (square/rectangular) area of each tile n exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including dismantling of existing tile complete all as specified. |
| 5 | M&L for green marble work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars window cills, cooking platforms, stair case and the like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15 mm thick screed bed in CM 1:4 including demolition of existing marble complete all as specified and directed. |
| 6 | M&L for granite (of any type) work (table rubbed and polished ) 20 mm thick in steps, jambs, pillars, window cills, cooking platform and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 including demolition of existing work complete all as specified and directed. |
| 7 | M&L for 75mm thick cement cocnrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface even and fair complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges with WPC complete all as specified and directed by Engineer-in-Charge.(Note : WPC shall be measured and paid for separately). |
| 9 | Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc |
| 10 | M&L for brick work with sub class 'B' old size fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 11 | All as per Srl item No 10 here-in-before but except bricks (old dismantled serviceable bricks obtained from Srl item No 09 shall be reused after necessary cleaning of mortar). |
| 12 | M&L for brick work with sub class 'B' bricks (fly ash), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 13 | M&L for removing existing treatment ,all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air, roughening and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints & cracks and apply primer with smart care epoxy primer to seal the pores/cracks and enhance the adhesion of the coating. • Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilutioon of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gram/ sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12 Hrs. Apply second of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5 Hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years . Note : Application of water proofing treatment will be done by Authorised Applicator only . |
| 14 | M&L for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:2:4) type B-1 (using 12.5mm graded crushed stone aggregate) and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. (Note: - Cost of formwork and welded mesh for bldg ht upto 12 mtr, shall be deemed to be included in unit rate quoted by the Contractor). |
| 15 | M&L for 15 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 16 | M&L for 12 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 17 | M&L for 5 mm thick rendering of ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 18 | M&L for preparation of new plastered surface and applying two coats of cement base paint on wall surface complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper on wall over a coat of white putty on plastered surface wall complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 21 | M&L for preparation of old plastered surfaces of wall by brooming down, making good holes, cracks, etc and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as directed by Eng-in-charge |
| 22 | S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 completeincl two coat of painting incl taking down old existing window :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). (viii) Painting with one shop coat of zinc chromate primer. Note: Wire cloth, glass shall be measured and paid for separately |
| 23 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, painting with one shop coat of zinc chromate primer incl two coat of painting incl taking down old existing window/ventilator complete all as specified and directed. Note: Glass/ wire cloth shall be measured and paid for separately |
| 24 | S&F anodised aluminium door shutters, aluminium section weighing not less than 1.00kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos (200mm long) in each door, hinges (150mm long), anodised aluminum snap beading screws etc incl taking down old existing complete all as specified. |
| 25 | S&F anodised aluminium window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.75 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) incl taking down old existing complete all as specified. |
| 26 | S&F anodised aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc incl taking down old existing and complete all as specified. |
| 27 | S&F 4.8mm thick sheet glass ordinary quality in squares or rectangular not exceeding 0.50sqm in each panes in aluminium door or window shutter complete all as specified and directed. |
| 28 | S&F in repair 4.8mm thick black sheet glass ordinary quality in squares or rectangular not exceeding 0.5 sqm in each pane in aluminium door or window shutter complete all as specified and directed. |
| 29 | M&L for solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers all as specified and directed. |
| 30 | S&F in repairs mortice lock, aluminium vertical type size 65mm 2 levers complete all as specidfed and directed. |
| 31 | S&F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 32 | S&F in repair floor door stopper 140 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge. |
| 33 | Repairs, easing & adjusting of shutter without taking down shutters of any description exc 1.00 sqm & nexc 2 sqm each all as specified. |
| 34 | Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter from the chowkats) complete all as specified and directed. |
| 35 | Taking down chowkats with shutter exc 1.50 Sqm but n. exc 4.00 sqm each (without taking off shutter from the chowkats) complete all as specified and directed. |
| 36 | Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed. |
| 37 | S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/ brick surface) of chowkats and hinges applying two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces and complete all as specified and directed. |
| 38 | S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges applying two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 39 | S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum grain density of 750 kg/ cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/ mm² , modules of elasticity 900 N/ mm² and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed by Engineer-in-Charge. ( Note :- M.S hold fast, lugs, stainless steel dash fasteners shall be paid for separately). |
| 40 | S&F facoty made solid PVC moulded shutter of size 28mm to 30mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, complete all as specified and directed. |
| 41 | S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels on both side complete all as specified and directed. |
| 42 | S&F 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauge but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) complete all as specified and directed. |
| 43 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 44 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 45 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm each complete all as specified and directed. |
| 46 | S&F in repair 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.50 Sqm each incl hacking out of old broken glass panes from wooden or steel frame complete all as specified and directed. |
| 47 | S&F figured glass pin headed type glazing with oil putty glass 4mm thick, fixed with oil putty in square n exc 0.5sqm in each pane. |
| 48 | M&L for preparation of new wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 49 | M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 50 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate joint through welding/ bolt in metal/wooden frame to be carried out complete all as specified and directed. |
| 51 | S&F aluminium anodized barel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed. |
| 52 | S&F aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified and directed. |
| 53 | S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 through bolt or with screw complete all as specified and directed. |
| 54 | S&F aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections, fixing and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 55 | S&F in repair cutrain rod 20mm dia of mild steel PVC coated with brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed. |
| 56 | M&L for 18/19 mm prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work all as specified and directed. |
| 57 | S&F hasp and staple, 150mm size, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed. |
| 58 | Demolition of wall ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs blankets any thickness including cover fillets, complete all as specified and directed. |
| 59 | S&F in repair 7-8 mm thick PVC hollow wall panelling consisting of wood grain printed pvc sheet inclusive of solvant cement and fixing at site on PVC frame formed by sticking high density EPS, flame retardent (TF) grade, heavy duty with taper strip weather proof, water proof, termite proof including all C and U type PVC section with matching of panelling fixing at border of panelling and complete all as specified and directed by Engr-In-Charge. |
| 60 | S&F in repair solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed. |
| 61 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and as directed. |
| 62 | S&F 500 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed. |
| 63 | S&F 1000 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed. |
| 64 | S&F in repair ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore complete all as specified and directed. |
| 65 | S&F in repair gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 66 | S&F in repairs vitreous china wash down water closet (pedestal pattern) fixing with bolts, white colour, incl stainless steel L-type jet spray with 1m hose pipe, connection to trap and to flushing pipe, anti-syphonage pipe, etc. incl seat cover complete including making good to floor complete all as specified and directed. |
| 67 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with a set of integral foot rest with `P’ or `S’ trap including water connection to trap and flushing pipe etc complete and bedding in PCC 1:7:12 type F-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. |
| 68 | S&F in repair vitreous China wash basin, with pedestal white flat back, size 550x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and coupling complete all as specified and directed. |
| 69 | S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern) white with grating, waste coupling and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement, grating and union for discharge pipe incl PTMT waste coupling, waste pipe, urinal spreader complete all as specified and directed. |
| 70 | S&F in repair PVC waste pipe 32mm dia 800mm to 1200 mm long fixed to wash fitting of wash basin and sink all as specified and directed. |
| 71 | S&F in repair PVC low level duel flushing cistern (duel type) 10 ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed. |
| 72 | S & F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 73 | S&F in repair stop valves or angel valve cast copper alloy 15mm bore fancy type chromium plated alloy with butterfly handle screwed down for high pressure, screwed on both ends, fixed with iron pipe etc complete all as specified and directed. |
| 74 | S&F in repair bib taps cast copper alloy 15mm bore fancy type chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 75 | S&F in repair pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore all as directed by Engineer-in-Charge. |
| 76 | S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up/ down complete all as specified and directed. |
| 77 | All as per Srl item No 76 above but fixing only (old serviceable pipe re-used). |
| 78 | S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up/ down complete all as specified and directed. |
| 79 | All as per Srl item No 78 above but fixing only including cleaning and providing new fittings (old serviceable pipe re-used). |
| 80 | Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required. |
| 81 | S&F PVC (SWR) pipes 110mm dia in any length with rubber ring joint fixed to wall/floor upto 12m height complete all as specified and directed. |
| 82 | S&F PVC (SWR) pipes 75mm dia in any length with rubber ring joint fixed to wall/floor upto 12m height complete all as specified and directed. |
| 83 | S&F in repair PVC (SWR) bends 110mm dia, in any radius, complete all as specified and directed. |
| 84 | S&F in repair PVC (SWR) bends 75mm dia, in any radius, complete all as specified and directed. |
| 85 | S&F in repair 110mm bore PVC(SWR) branch pieces (Single T), single (equal or unequal ordinary or inverted ) or with parallel branches with oval access door complete all as specified and directed. |
| 86 | S&F in repair 75mm bore PVC(SWR) branch pieces (Single T), single (equal or unequal ordinary or inverted ) or with parallel branches with oval access door complete all as specified and directed. |
| 87 | S&F in repair for PVC(SWR) floor trap plain with grating including jointing with solvent cement 100mm dia complete all as specified and directed. |
| 88 | S&F in repair for PVC(SWR) floor trap plain with grating including jointing with solvent cement 75mm dia complete all as specified and directed. |
| 89 | S&F stack clamps (for 110 mm pipe) out of 20mm x 1.5mm galvanised mild steel incl stays, bolt and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 90 | S&F in repair grating doom 100 mm dia with waste hole of PTMT (Min weight 40gms) complete all as specified and directed. |
| 91 | S&F in repair brass chromium plated shower rose fancy type 125mm size with swivel joints, any size, including fixing to steel pipe or union with brass CP arm 195mm long, 15 mm size complete all as specified and directed. |
| 92 | S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long with flanges complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F in repair 600mm X 450mm(min size) beveled edge mirror of selected quality glass fancy type and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 94 | M&L for 75 mm thick, PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate), as in sub base under floor for increasing height complete all as specified and directed. |
| 95 | M&L for 60 mm thick PCC (M-35) factory made with grey cement and pigment interlocking tiles/ paver block of shape/ size as conforming to IS 15658, joints will be filled with fine sand including dismantling of existing tiles complete all as specified and as directed by Engr-in-Charge. (Note :- Sand will be paid under relavent item). |
| 96 | M&L for coloured chequered cement concrete tiles with grey cement and no pigment, 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiles complete all as specified and directed. |
| 97 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 98 | S&F machine cut kota stone slab flooring 20-22mm thick over cement screed base 20mm thick in 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (with bees wax polish) including demolition existing complete all as specified and directed by Engineer-in-Charge. |
| 99 | S&F Gl powder coated frame work for seamless false ceiling, size of grid 605 x 605mm with main tee of size, 32mmx 23.5 mm x1.5mm thick, cross tee of size 25mm x 23.5mm x1.28mm and angle of size 23.5mmx23.5mm x 1.2 mm fixed on wall all powder coated finish on exposed surface of tee and angle, hung from ceiling using 2mm dia GI suspension wires and 'J' bolts , washers, nuts spaced at 1200mm both ways including making niches for fans/light all as specified and as directed. |
| 100 | S&F 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and directed. |
| 101 | Demolition of RCC of any description upto 12m height all as specified and directed by Engr-in charge. |
| 102 | Form work to rough finished surface of concrete flat to soffits of shelve, chajja, fins etc including supports over hangs all as specified and as directed by Engineer-in-Charge. |
| 103 | S&F 6mm dia and over TMT bar cut to length bent to shape including cranking binding spirally, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securing with clips as specified and directed. |
| 104 | M&L for RCC in 1:2:4 type B-1(using 12.5 mm graded crushed stone aggregate) as in cover slab, chajjas facia, shelves etc and similar work all as specified. |
| 105 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls,fixed with self tapping screws including dismantling of old asbestos/corrugated/semicorrugated sheet all as specified and directed. |
| 106 | Dismantling framed work timber scantlings 40 sqm and over in section, in any position complete all as specified and directed. |
| 107 | S&F rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails & fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc. complete all as specified and directed by Engr-In-Charge. |
| 108 | M&L preparation of old plastered surface and applying two coats of Oil bound distemper of wall on plastered surface wall complete all as specified and directed by Engineer-in-Charge. |
| 109 | M&L for excavating in post holes ( or similar holes) in soft/ loose soil, each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n. exc 50m and making good surface. |
| 110 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 57,464/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
