|
| 1 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering, and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed. |
| 2 | M&L for PCC 1:3:6 Type C-2 ( Using 40mm graded crushed stone aggregate) as in foundation , filling, sub base and mass concrete complete all as specified and directed. |
| 3 | M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed. |
| 4 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) quality A complete all as specified and as directed. |
| 5 | S&F mild steel angle iron post & strut etc. in fencing including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165 complet all as specified and as directed. |
| 6 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of shank 5 to 10mm completed all as specified and as directed. |
| 7 | M&L for Mild steel round barbs 10 mm dia and over cut to length, bent to shape required for securing chain link fencing cut to length bent to shape required including binding bolting etc complete confirming to Fe-410-W (Gde.E-250) Part- I quality-A complete all as specified and directed. |
| 8 | Supply only chain link fencing wire mesh of any size or type, made with 4 mm dia mild steel galvanised wire complete all as specified and as directed. |
| 9 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed |
| 10 | S&F galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to RCC / steel post etc., including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc., (each line of wire to be measured separately) complete all as specified and as directed. |
| 11 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 12 | M&L for preparation of new steel or iron surfaces of any description n exc 10cm width or girth and applying two coats of aluminium paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 13 | M&L for preparation of surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth and treated with two coats of tar or coal tar black bituminous paint complete all as specified and as directed. |
| 14 | Site Clearing of old fencing away all grass vegetation, Sapling, Shrubs and trees n. exc 30 cm girth or 1metre width and removing rubbish up to a distance of 50 m outside the periphery of the area complete all as specified and as directed. Please Enable Macros to View BoQ information |
