|
| 1 | Repair/Rewinding of 75 HP Non Clog submersible sewage motor pump Motor Rewinding with F class insulation |
| 2 | Winding thermostat 140+5 on/off auto cut |
| 3 | S/F of Upper mechanical seal |
| 4 | S/F of Lower mechanical seal |
| 5 | S/F Cable protector |
| 6 | S/F O Ring |
| 7 | S/F of Oil |
| 8 | Fasteners Set |
| 9 | Profile Gasket |
| 10 | S/F DI Impeller |
| 11 | Nilos Ring |
| 12 | Spring Washer |
| 13 | Plan head screw |
| 14 | Motor pump dismantling, assembling i/c labour charge |
| 15 | Repairing of fully Automatic Starter 75 HP as per following S/F of MNX X 185 Amp, Contactor L&T make |
| 16 | S/F of 250 Amp, MCCB L&T make |
| 17 | S/F of Timer L&T make |
| 18 | S/F of VPD Make Soft Hard |
| 19 | S/F of MPD Make Soft Hard |
| 20 | WLC/Seal Monitor, Make Pump Care/Kishor |
| 21 | S/F of Control Transformer Make Electra Care/Pioneer |
| 22 | S/F Winding Temp. Relay Minilic Make |
| 23 | Auto Transformer suitable for 75 HP Induction Motor |
| 24 | Repairing of fully Automatic Starter 100 HP as per following S/F of MNX X 225 Amp, Contactor L&T make |
| 25 | S/F of 250 Amp, MCCB L&T make |
| 26 | S/F of Timer L&T make |
| 27 | S/F of VPD Make Soft Hard |
| 28 | S/F of MPD Make Soft Hard |
| 29 | WLC/Seal Monitor, Make Pump Care/Kishor |
| 30 | S/F of Control Transformer Make Electra Care/Pioneer |
| 31 | S/F Winding Temp. Relay Minilic Make |
| 32 | Auto Transformer suitable for 100 HP Induction Motor |
| 33 | P/F M.S. specials such as Tee , Bends , Collars , Tapers, Gap pieces,including Flange Ends as required , Painting ,Cutting, welding as per site requirement of MS pipe thickness etc complete in all respect as per direction of E/I. |
| 34 | Repairing of sluice valve Kirlosker Make/ISI make new of spendle (i.e. S.S. non megnated) flapper adjusting nut, bolts,rod, welding of body for fitting the flapper for Proper complete of work in all respects as per direction of E/I. 200 mm dia |
| 35 | 250 mm dia |
| 36 | 300 mm dia |
| 37 | 350 mm dia |
| 38 | 500 mm dia |
| 39 | Repairing of Reflex valve Kirlosker Make/ISI make new of spendle (i.e. S.S. non megnated) flapper adjusting nut, bolts,rod, welding of body for fitting the flapper for Proper complete of work in all respects as per direction of E/I. 200 mm dia |
| 40 | 250 mm dia |
| 41 | 300 mm dia |
| 42 | Hiring of Welding Set Running Time @ 6 Hrs/Day (Including Service cost of operating staff, supply of suitable electrodes etc). |
| 43 | Hiring of Gas cutting set with oxygen and LPG Running time @ 6 Hrs/Day (Including Service cost of operating staff, supply of necessory items as oxygen & LPG etc). |
| 44 | Supply and laying aluminum conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 240 sq.mm 3-1/2 core |
| 45 | 185 sq.mm 3-1/2 core |
| 46 | 120 sq.mm 3-1/2 core |
| 47 | 70 sq.mm 3-1/2 core |
| 48 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge 240 Sqmm |
| 49 | 185 sqmm |
| 50 | 185 sqmm |
| 51 | 70 sqmm Please Enable Macros to View BoQ information |
