|
| 1 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Hot finished welded type tube ) |
| 2 | Steel work welded in built up sections, trusses and framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. |
| 3 | Providing and fixing MS welded Mesh 25x25x3mm thick including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 4 | Providing and fixing 0.60mm(zero point six zero milimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-in-charge. MAKE TATA Dura Shine |
| 5 | Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping including carriage of materials in all leads as per directions of the Engineer-in-Charge.(i) With white enemal paint. |
| 6 | Provdiing and fixing Copper oxidied fitting (iron) (i) Butt hinges 75x47x1.70mm , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 7 | Providing and fixing oxidised M.S sliding door bolts with nuts and screws ets including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) 250x16mm |
| 8 | Providing and fixing G.I pipes complete with G.I Fitting including trenching and refilling etc , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) External work (a) 15mm dia nominal bore . |
| 9 | (b) 20 mm dia nominal bore |
| 10 | Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end ) (i) 15 mm dia nominal bore, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 11 | Providing and fixing ball valve (brass) of approval quality. High and low pressure with plastic floats complete (i) 15 mm dia nominal bore ,including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 12 | Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screw etc complete (New work) , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm dia nominal bore . |
| 13 | (ii) 20 mm dia nominal bore |
| 14 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with out fittings and the base support for tank including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.MAKE SINTEX NEO |
| 15 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm (Thirty centimetre) in depth, 1.5 m (One point five metre) in width as well as 10 sqm (ten Square Metre) on plan) including getting out and disposal of excavated earth all lead and lift as directed by Engineer-in-charge and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ) Any loss to the public and private propriety, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. (i)All kinds of soil. |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 1:2:4 (One cement : Two coarse sand) : Four graded stone aggregate 20 mm(Twenty milimetre) nominal size) |
| 17 | Providing and fixing 19mm thick HDMR laminated water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 18 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 19 | Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 9mm thick. |
| 20 | Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)1st class deodar wood . |
| 21 | Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 22 | Providing and fixing bright finished brass handles with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm |
| 23 | Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting including carriage of material in all leads and lifts as per direction of the Engineer-in-charge.(a)Ready mixed paint brushing wood primer pink. |
| 24 | Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint. |
| 25 | Providing and fixing Bubble sheet behind cup baord/panelling complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 26 | Providing and fixing pine wood readymade plain framed panelling with necessary screws priming coat on unexposed surface including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 27 | French spirit polishing two or more coats on new work including a coat of wood filler |
| 28 | Providing woodwork in frame of doors windows , clerestory , windows and other frames wrought framed and fixed in position , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 2nd class pine wood |
| 29 | Taking our doors windows , clerestory , window shutters (steel or wood) including stacking within 50 meters lead , including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Of area beyond 3 sq meters |
| 30 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, abidused trabsoarebt ir dyed required shade conforming to IS 1868 (Minium anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/Neoprence felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (a) For Idoors windows and ventilatiors and glazed partitions frames. |
| 31 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/Neoprence gasket required (Fittings and glazibng/panelling shall be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 32 | Providing and fixing Glazing in aluminium door window, ventilator shutters and partition etc with PVC/Neoprens gasket etc complete as per the architectiral drawings and the ( the cost of alunium snap beading shall be paid in basic items) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Frosted Glass 5mm. |
| 33 | Providing and fixing G.I wire mesh 85 G. with wire of dia 0.56 mm for aluminium windows ventilators shutters etc with PVC / neoprens gasket etc including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. ( the cost of alunium snap beading shall be paid in basic items) |
| 34 | Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)100x10mm |
| 35 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm |
| 36 | Providing and fixing brightfinishing hard drawn hooks and eyes, complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100mm |
| 37 | Providing and fixing 1.50mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) MAKE LG including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 38 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 40x40 mm (base and height) |
| 39 | Disposal of muck /denris/ excavated earth upto site approved by Municipal Corporation surrounding Shimla upto all leads and lifts as per directions of the Engineer-in-Charge. |
| 40 | Repair to plaster in patches of 2.50 square meter under and upto 10 to 15mm thick including cutting the patch in proper shape and re-plastering the surface of wall including disposal to the dumping ground with a lead of 20 metres with including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge. (i) Cement Mortar 1:5(One cement: Five sand). |
| 41 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (i) Old work (one or more coats) including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 42 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) One or more coats on old work |
| 45 | Finishing wall with weather proof exterior grade emulsion of approved design Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth including carriage of materials in all leads as per directions of the Engineer-in-Charge. |
| 46 | Providing and fixing panelled glazed or shutters for doors windows and clerestory windows. Fixing with but hinges of required size with necessary screws,excluding panelling with will be paid for seprately , all complete as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood. |
| 47 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick 2nd class deodar wood |
| 48 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 150x10mm |
| 49 | (ii) 200x10 mm |
| 50 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 mm |
| 51 | Providing and fixing in position collepsable steel shutters with vertical channel 20x10x2 mm with flat iron diogonals 20x5 mm size, with stop and bottem rail of T-iron 40x40x6 mm dia steel pulleys complete with bolt , nuts, locking arrangement, stoppeer, hamdles including applying a priming coat of approved steel primer including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 52 | Provdiing and fixing of 40 cm overall width plain G.S sheet fixed with polymer coated J or L hooks , bolts and nuts , G.I limpet and bitumen washer complete , bent to shape and fixed in wall with cement mortar 1:3(1 cement : 3 coarse sand ). including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 0.50mm thick with zinc coating not less than 275 gm/m2 |
| 53 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./H.P.H.D plastic ball including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm (Fifteen milimeter) dia bore. 105 mm long , weighing not less than 138 gms . Please Enable Macros to View BoQ information |
