|
| 1 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 2 | Kitchen sink without drain board |
| 3 | 610x460 mm bowl depth 200 mm |
| 4 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 5 | Orissa pattern W.C. pan of size 580x440 mm |
| 6 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 7 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 8 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 9 | 10 litre (full flush) capacity-white |
| 10 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 11 | White solid plastic seat with lid |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 13 | Flexible pipe |
| 14 | 32 mm dia |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 16 | Internal work - Exposed on wall |
| 17 | 15 mm dia nominal bore |
| 18 | 20 mm dia nominal bore |
| 19 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 20 | 45 cm length |
| 21 | 15 mm nominal bore |
| 22 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 23 | 15 mm nominal bore |
| 24 | 20 mm nominal bore |
| 25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 26 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 27 | 15 mm nominal bore |
| 28 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 29 | 15 mm nominal bore |
| 30 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 31 | 15mm nominal bore |
| 32 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 33 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 34 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 35 | Providing and fixing of C.P. Long Bend (1'-4\\" long) for OWC of size 32mm dia Complete in all respect. |
| 36 | Providing and fixing of 600x450 or 550x400 mm beveled edge mirror of superior glass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Based on DSR Item No.17.31) |
| 37 | Providing and fixing of C.P.steel grating hole /without hole heavy duty 100mm dia complete in all respect. (As desired by EIC) |
| 38 | Providing and fixing of PVC Pipe line 6kg/cm2 pressure of approved make including cost of coupler, cement solvent complete except excavation. |
| 39 | 110 mm |
| 40 | 75 mm |
| 41 | Providing and fixing of PVC fitting for low level cistern complete in all respect. |
| 42 | Providing and fixing of PVC Handle for low level cistern complete in all respect. |
| 43 | Providing and Fixing of PVC Ball Cock for low level cistern complete in all respect. (As decided by the EIC) |
| 44 | Providing and fixing of C.P. Waste 32 mm complete in all respect. |
| 45 | Providing and fixing of C.P. brass Soap dish of approved make complete in all respects. |
| 46 | Providing and fixing of C.P. brass Autocloset pressmatic urinal cock of approved make complete in all respect. (As decided by the EIC) |
| 47 | Providing and fixing of C.P. brass Pillar Cock with autoclosing system of approved make complete in all respect at site. (As decided by the EIC) |
| 48 | Providing and Fixing of C.P. Waste 1 1/2 x 3\\"x4\\" long for stainless steel sink complete in all respect. |
| 49 | Providing and fixing in position best indian Make C.P.Cup heavy Duty Complete in all respects.(minimum weight 15gm) complete in all respects. (As desired by EIC) |
| 50 | Providing and Fixing of PVC Tank Cover for water storage tanks of different sizes complete in all respect. |
| 51 | 300/500/1000 ltr |
| 52 | 2000/5000 ltr |
| 53 | Providing and fixing wash basin with C.I. brackets, without C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (Based on DSR Item No.17.7.4) |
| 54 | White Vitreous China Flat back wash basin size 550x400 mm with single without C.P. brass pillar tap Please Enable Macros to View BoQ information |
