|
| 1 | Supply of DPC Aluminum HT winding wire (round) in sizes from 12 to 21 SWG |
| 2 | Supply of DPC Aluminum Strip of sizes for LV winding of Distribution transformers (25 KVA to 250 KVA) |
| 3 | Supply of SE Aluminum HT winding wire (round) in sizes from 16 & 18 SWG |
| 4 | Supply of LV Brass Bush rods 12 mm |
| 5 | Supply of LV Brass Bush rods 19 mm |
| 6 | Supply of LV Bush rods 25 mm |
| 7 | Supply of HV Almunium Bush rods 12 mm |
| 8 | Supply of Cork Washer for HT busing of sizes |
| 9 | Supply of Cork washers fo LT bushing 12/20/25 mm dia |
| 10 | Supply of Gutka for HT Bush |
| 11 | Supply of Bush Holder Clamp |
| 12 | Supply of M Seal |
| 13 | Supply of HV Bushing (11KV) |
| 14 | Supply of LV Bushing for 63/100 KVA |
| 15 | Supply of LV Bushing for 250/400 KVA |
| 16 | Supply of LV Bushing for 630 KVA |
| 17 | Supply of Cotton tape 1\\" size (length 35 meter) |
| 18 | Supply of Old cotton sari/ Dothi cloth |
| 19 | Supply of Rubberized cork sheet 4 mm thick, 2 feet x 3 feet |
| 20 | Supply of Rubberized cork sheet 3 mm thick, 2 feet x 3 feet |
| 21 | Supply of Lethorized paper, 20 mil as per sample provided |
| 22 | Supply of Packing sheet/ Press Card board 1/2/3 mm |
| 23 | Supply of Glass wool Sleves of sizes |
| 24 | Supply of Sleves 4mm, 6mm |
| 25 | Supply of Fiber Tubes 8mm, 10mm, length 1mm |
| 26 | Supply of HT Cotton Tape |
| 27 | Supply of Insulation Gum |
| 28 | Supply of Backlite tubes 7 mm dia (1 meter length) |
| 29 | Supply of Electrical grade Kraft paper, 4 mil |
| 30 | Supply of LT Rubber washers ( small M12 and M20) |
| 31 | Supply of LT Rubber washers large (M12, M20 and M 25) |
| 32 | Supply of HT Rubber washers |
| 33 | Supply of HT Al. Jointing Thimbles |
| 34 | Supply of Oil Seals for Bush rods (for 63/100/250 KVA Transformers) |
| 35 | Supply of Gati 3 mm |
| 36 | Supply of Nawar tape 1\\" size (35 meter roll) |
| 37 | Supply of Creeping tape |
| 38 | Supply of Al.Thimbles 120 mm square 3D/ Dowells or any standard make as recommended by the department |
| 39 | Supply of Al.Thimbles 185 mm square 3D/ Dowells or any standard make as recommended by the department |
| 40 | Supply of Al.Thimbles 300 mm square 3D/ Dowells or any standard make as recommended by the department |
| 41 | Supply of GI Nuts and bolts of sizes with GI washers |
| 42 | Supply of healting element (2KW) for filtration plant |
| 43 | Supply of GI Wire (8-SWG)/ (16-SWG) |
| 44 | Supply of Fabricated MS Sheets 2mm/ 4mm. |
| 45 | Supply of Bimetalic (Brass/Almunium) solderless clamps for 63/100 KVA transformer |
| 46 | Supply of Bimetalic (Brass/Almunium) solderless clamps for 250/400 KVA transformer |
| 47 | Supply of Transformer oil of standard make conforming to IS 335-1993 with latest ammendments |
| 48 | Exchange of old used DPC (in the ratio of 1:1 kgs) with new/ fresh DPC of sizes 12, 16, 18 SWG), the bidder needs to quote rates cost excluding cost of old DPC |
| 49 | U shaped heating elements ( magnesium oxide filled) for ovens. |
| 50 | coarse filter packs for T-Oil Filtration Plant |
| 51 | Grease |
| 52 | Fevitite tubes (2-Component (Resin and Hardener)) |
| 53 | Full thread rods (no head) with double nuts M10=18”,M12=8” |
| 54 | Supply of Tarpin oil Please Enable Macros to View BoQ information |
