|
| 1 | Taking down cement plaster on brick or stone walls or ceiling surfaces etc including raking out joints hacking for key scrubbing down with water and include for all necessary lowering, etc., removal of rubbish off the premises, removal and depositing serviceable materials where directed and leaving the work clear of any plastering complete all as specified and directed. |
| 2 | M&L for 10mm thick plastering in CM 1:6 on fair faces of bricks or concrete surfaces (internal surfaces) finished even and smooth w/o using extra cement complete all as specified and directed. |
| 3 | M&L for Preparation of new surface of wall and applying two coat of oil emulsion distemper over 3mm thick wall care putty on internal walls surfaces complete all as specified and directed. |
| 4 | Supply and fix sheet glass ordinary quality and glazing with neoprene rubber/silicon beading/oil putty in square not exceeding 0.5 sqm each pane 4mm thick complete all as specified and directed. |
| 5 | Supply and fix Figured glass pin head type glazed with neoprene rubber/silicon beading/oil putty in square not exceeding 0.5 sqm in each pane 4mm thick complete all as specified and directed. |
| 6 | S&F in repair Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed to existing shutters of any description complete all as specified and directed. |
| 7 | Supply and fixed in repair fancy type curtain rod 25mm dia with heavy duty brackets, both of SS 304 grade and thickness not less than 1.2mm including stops, rollers etc complete all as specified and directed.. |
| 8 | Supply and fixed in repair floor door stopper aluminium body with overall length 140mm complete all as specified and directed. |
| 9 | Supply and fixed in repair Door closer hydraulically regulated,designation No, 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (aluminium) complete all as specified and directed. |
| 10 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) area not exceeding 1.5 sqm each complete all as specified and directed. |
| 11 | Taking down chowkat with shutter(without taking off shutter from the frame) area exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed. |
| 12 | Taking down shutter of any description exceeding 1 sqm but not exceeding 2sqm each etc.complete all as specified and directed. |
| 13 | Taking down shutter of any description exceeding 2sqm each etc.complete all as specified and directed. |
| 14 | Taking down shutter and refixing in same opeining of any description exceeding 1 sqm but not exceeding 2sqm each etc.complete all as specified and directed. |
| 15 | Supply and Fix for 2nd Class H.W. plain solid straight chowkats & frames wrought, framed, rebated on the solid rounded or chamfered put together with glue, pinned at joints complete all as specified and directed. |
| 16 | Providing and fixing factory made uPVC white colour Sliding window Area not exceeding 2.00 sqm each Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. .) |
| 17 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, includingdrilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 18 | Supply and Fix for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.Note: The complete fixing and making good of the connected walls shall be completed within 10 days from the start of taking down of existing doors/windows/ventilators.Rs 500/day shall be penalised in case of delay of work beyond 10 days. |
| 19 | Supply and Fix Powder coated aluminium window, doors and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 20 | Supply and Fix Plain colour ACP sheet of 6mm thickness fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site complete all as specified and directed. |
| 21 | S&F aluminium grills DG-104 of Deco Grill/ Hindal 10 mm thick diamond shape with aperture 10.0cm for windows |
| 22 | Supply and Fix for factory made Plain framed panelled shutter 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln seasoned and chemically pressure treated IInd class H.W rail and style complete all as specified and directed.Note: The complete fixing and making good of the connected walls shall be completed within 10 days from the start of taking down of existing doors/windows/ventilators.Rs 500/day shall be penalised in case of delay of work beyond 10 days. |
| 23 | Material and Labour for 35mm thick 2nd class H.W Glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified in SSR Part I section clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed.Note: The complete fixing and making good of the connected walls shall be completed within 10 days from the start of taking down of existing doors/windows/ventilators.Rs 500/day shall be penalised in case of delay of work beyond 10 days. |
| 24 | Material and Labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed. |
| 25 | Supply and Fix for Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed complete all as specified and directed. |
| 26 | Supply and Fix for solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 27 | Supply and Fix for factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PCV 'C' Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and directed. |
| 28 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 29 | Providing and fixing factory made single extruded WPC (Wood Polymer omposite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with M. S./S.S butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. |
| 30 | Supply and Fix for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long complete all as specified and directed. |
| 31 | Supply and Fix Butt hinges, medium weight cold rolled stainless steel and fixed 100mm long complete all as specified and directed. |
| 32 | Supply and Fix Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long complete all as specified and directed. |
| 33 | Supply and Fix Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed. |
| 34 | Supply and Fix Aluminium handles cast type anodised 150 mm long complete all as specified and directed. |
| 35 | Supply and Fix Aluminium handles cast type anodised 125 mm long complete all as specified and directed. |
| 36 | Material and Labour for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exceeding Half brick but not exceeding one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed |
| 37 | Supply and Fix for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed |
| 38 | S & F in repairs Mortice lock of 2 levers mild steel, vertical type, size 100 mm. Make : Godrej or equivalent. |
| 39 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including Taking down steel tubing and connections 15 mm bore including cleaning for refixing or removal to store complete all as specified and directed. complete all as specified. |
| 40 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including Taking down steel tubing and connections 20 mm bore including cleaning for refixing or removal to store complete all as specified and directed. complete all as specified. |
| 41 | Material and labour for Cutting chases on brick walls , pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 42 | Supply and fixing in repair CPVC 20mm Brass Elbow (3/4 x 1/2) |
| 43 | Supply and fixing in repair CPVC 20mm Brass Tee |
| 44 | Supply and fixing in repair CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) |
| 45 | Supply and fixing in repair CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) |
| 46 | Demolition of cement concrete in below or above ground floor and paving not exceeding 15 cm thick (unreinforced) complete all as specified and directed |
| 47 | M&L cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) 25mm thick as in levelling course complete all as specified and directed. |
| 48 | M&L Non - skid Ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM 1:6 including Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 49 | M&L for Vitrified Light Shade Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM 1:6 including Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 50 | M&L Non - skid Ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM 1:6 including Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 51 | M&L Glazed ceramic colured tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 including Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 52 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-calls, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 and moulding at edges wherever reqd including Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 53 | Supply and fixed in repair Bib taps 15mm bore chromium plated cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrulo and fixed complete all as specified and directed. |
| 54 | Supply and fixed in repair chromium plated Angle stop cock 15mm bore with wall flange cast copper alloy complete all as specified and directed. |
| 55 | Supply and fixed in repair Stop cock fancy type chromium plated with long shank and cup (Concealed type) screwed down high pressure with crutch or butterfly handle screwed bot ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed. |
| 56 | Supply and fixed in repair 15mm Brass CP mixer (three in one faucet) for mixing hot & cold water including three joints to steel pipes or union and plugging and screwing to wall complete all as specified and directed |
| 57 | Supply and fixed in repair Brass chromium plated shower rose 125mm with 450mm arm complete all as specified and directed. |
| 58 | Supply and fix 600x450mm beveled edge mirror of selected quality glass, with chromium plated brass screws or cup washers complete all as specified and directed. |
| 59 | Supply and fixed in repair Health faucet ABS Body mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and brass wall hook including making connections and fixed in position complete all as specified and directed. |
| 60 | Supply and fixed in repair PVC connection 15 mm size with PTMT nut of length 600 mm, complete all as specified and directed. |
| 61 | Supply and fix for Grating PTMT (Minimum weight 40gms) 100mm size fixed to repair complete all as specified and directed |
| 62 | Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern) white with PVC (SWR) \\"P\\" or 'S' trap, (excluding fixing bolts flushing cistan), connection to flushing pipe and outgoing sewage pipe,Plastic water closet,black,closed pattern with flat bottom,cover and mild steel chromium plated aluminised hinging device,along with PVC valve less, symphonic action type flush tank, white, 10 litre capacity with inlet ball valve, float & handle incl brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, etc complete all as specified and as directed. |
| 63 | Supply and fixed in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections including 110mm PVC (SWR) WC connector with lip ring etc complete all as specified and directed. |
| 64 | Supply and fixed in repair PVC valveless, syphonic action type flush tank in repair,10 litre capacity with inlet ball valve, float & handle including brackets complete etc complete all as specified and directed. |
| 65 | Supply and fixed in repair wash hand basin, white flat back size 550 x 400mm including brackets, and pinning in ends of brackets for erecting stand etc complete all as specified and directed. |
| 66 | Dismantling of pipes of dia 100mm/75mm complete all as specified and directed. |
| 67 | Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed. |
| 68 | Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed. |
| 69 | Supply and fix 75 mm PVC(SWR) Bend complete all as specified and directed. |
| 70 | Supply and fix 110 mm PVC(SWR) Bend complete all as specified and directed. |
| 71 | Supply and fix 50 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed. |
| 72 | Supply and fixed in repairs 15mm dia brass chromium plated swan neck pillar tap with single lever complete all as specified and direction |
| 73 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. Please Enable Macros to View BoQ information |
| 74 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. Please Enable Macros to View BoQ information |
