|
| 1 | supplying, installing, testing and commissioning of ISI marked and CPRI approved gunmetal hydrant adaptor, threaded type, suitable for 63mm diameter hydrant outlet, complete with all accessories such as synthetic rubber gasket, male/female threaded ends , jointing materials, proper alignment and fixing, etc i/c entire carriage of material in all leads, lifts height and cost of all other incidentals as directed by the Engieer-in-charge .. Make:Victaulic / Reliance / Johnson Controls. |
| 2 | Providing &Replacement of hydrant valve stainless steel spindle with gland packing, dismantling old spindle, re-fixing, testing for smooth operation i/c entire carriage of material in all leads, lifts height and cost of all other incidentals as directed by the Engieer-in-charge.Make:Tyco / Victaulic / Reliance |
| 3 | Supply & fixing EPDM (Ethylene Propylene Diene Monomer) washers Water, weather and sunlight (UV) resistant, suitable for couplings i/c entire carriage of material in all leads, lifts height and cost of all other incidentals as directed by the Engieer-in-charge.Make:SKF / Trelleborg / Garware. |
| 4 | Providing and replacement of hose ends with new brass instantaneous couplings (male & female), including fixing with suitable clamps testing at working pressure , including carriage of materials in all leads and lifts and cost of all other incidental complete in all respects as directed by the Engineer-in-Charge charges. Make: Viking / Victaulic / Tyco . |
| 5 | Providing and replacement of damaged hose reel nozzles with stainless steel (SS) nozzles, including fixing with stainless steel jubilee clamps, complete in all respects, and testing for proper spray and jet flow, of approved make such as Minimax / Reliance / Victaulic or equivalent, as directed by the Engineer-in-Charge, including carriage of materials in all leads and lifts and cost of all other incidental charges required for proper completion of work. |
| 6 | Providing and fixing of glycerine-filled Bourdon type pressure gauge, range 0–16 bar, 63 mm dial size, complete with isolating cock, duly calibrated, of approved make such as Ashcroft / Wika / Yokogawa as directed by the Engineer-in-Charge, including carriage of materials in all leads and lifts and cost of all other incidental charges required for proper completion of work. |
| 7 | Providing and fixing of powder-coated stainless steel (SS) double door hose box, wall-mounted, lockable type, with glazed front doors (hinged type), of size 750 × 600 × 250 mm, fabricated from 1.2 mm thick SS sheet, complete in all respects. Make: Victaulic / Reliance / Tyco, as directed by the Engineer-in-Charge, including carriage of materials in all leads and lifts and cost of all other incidental charges required for proper completion of work. |
| 8 | Providing comprehensive servicing of complete fire fighting system including fire pumps (main and standby), jockey pumps, diesel engine, electric motors, control panels, AMF panel, valves (sluice/ball/butterfly), NRVs, strainers, pressure gauges, flow switches, yard and hydrant piping, hose reels, landing valves, hose boxes, hose pipes, branch pipes&nozzles and all associated accessories, comprising of dismantling, cleaning and inspection of all components, tightening of nuts, bolts, glands and electrical connections, alignment of pump and motor, lubrication of bearings and moving parts, checking & replacement of gland packing and mechanical seals, servicing of suction and delivery lines including strainers and NRVs, checking and calibration of pressure gauges and instruments, servicing of diesel engine including checking of engine oil, coolant, belts, hoses and battery (including replacement if required), replacement of oil, air and fuel filters, checking of fuel system, servicing and testing of control panels including starters, relays, contactors and wiring, checking of earthing, servicing of hose reels, hoses and nozzles inspection of hose boxes and fittings, complete in all respects, and conducting trial run and performance testing of complete system at duty point including recording of pressure, discharge and operational parameters, as directed by the Engineer-in-Charge, including carriage of materials in all leads and lifts and cost of all other incidental charges required for proper completion of work. |
| 9 | Supply and fixing of resettable manual call point (MCP) as per existing system, mounting type, complete with suitable mounting box and loop wiring, with LED indication and reset key, complete in all respects, of approved make such as Honeywell / Bosch / Siemens as directed by the Engineer-in-Charge, including carriage of materials in all leads and lifts and cost of all other incidental charges required for proper completion of work. |
| 10 | Providing and fixing of electronic fire alarm hooter, minimum 85 dB sound level at 1 metre, 230 V AC operated, indoor type, complete with necessary wiring connections, mounting accessories and fixing arrangement, complete in all respects of approved make such as Honeywell / Kentec / Bosch as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts and cost of all other incidental charges required for proper completion of work. |
| 11 | Providing and fixing of ISI-approved smoke detector as per existing system, complete with mounting base, installation, wiring connections, and loop testing, complete in all respects, of approved make such as Honeywell / Apollo / Siemens or equivalent, as directed by the Engineer-in-Charge, including carriage of materials in all leads and lifts and cost of all other incidental charges required for proper completion of work. |
| 12 | Providing and fixing of fire alarm control panel, 32 zones, microprocessor-based, with inbuilt battery charger and 24 V DC battery backup, suitable for operation with as per existing system, complete with all accessories, indications, controls and wiring connections, and commissioning including system integration, complete in all respects, complying with relevant IS/EN/NFPA standards, of approved make such as Honeywell / Bosch / Siemens or equivalent, as directed by the Engineer-in-Charge, including carriage of materials in all leads and lifts and cost of all other incidental charges required for proper completion of work. |
| 13 | Providing and applying one coat of epoxy anti-corrosive primer on cleaned pipe surfaces, including surface preparation and proper curing, complete.The work shall be carried out using approved make such as Asian Paints / Berger Paints / Nippon Paint, as directed by the Engineer-in-Charge.The item includes the cost of all materials, labour, surface cleaning, application, curing, and carriage of materials to site in all leads and lifts, along with all incidental charges required for proper completion of the work. |
| 14 | Providing and applying two coats of synthetic enamel finishing paint over already primed fire-fighting pipes, including color coding as per relevant standards..The work shall be carried out using approved make such as Asian Paints / Berger Paints / Nippon Paint, as directed by the Engineer-in-Charge.The item includes surface preparation, application of paint by brush, proper drying between coats, colour identification markings and curing, complete in all respects. It also includes the cost of all materials, labour, tools & tackles, carriage of materials in all leads and lifts, and all incidental charges required for satisfactory completion of the work. |
| 15 | Supply, laying, fixing, testing and commissioning of ISI-marked 1.5 sq.mm, 2-core copper conductor, PVC insulated, armoured cable, complete.The work includes proper laying of cable, termination at both ends using suitable glands and copper lugs, ferruling, connection and testing for continuity and insulation resistance (IR), complete in all respects. The cable shall be of approved make such as Polycab / Finolex / Havells, as directed by the Engineer-in-Charge.The item includes the cost of all materials, labour, tools & tackles, testing equipment, carriage of materials to site in all leads and lifts, and all incidental charges required for proper completion of the work. |
| 16 | Providing, supplying, fixing, testing and commissioning of 150 mm dia DI butterfly valve, PN 10 rating, wafer type, with lever operated mechanism, complete. The valve shall be installed in the pipeline with suitable rubber gaskets, nuts, bolts, washers, and all necessary accessories required for proper fixing and operation, complete in all respects. The valve shall be of approved make such as Larsen & Toubro / VIP Valves / Aira Euro Automation, as directed by the Engineer-in-Charge.The item includes alignment, tightening, leak testing, trial operation, and commissioning of the valve. It also includes the cost of all materials, labour, tools & tackles, carriage of materials in all leads and lifts, and all incidental charges required for satisfactory completion of the work. |
| 17 | Supply, Installation ,testing & commissioning of ABC Dry Chemical Powder (Mono Ammonium Phosphate, 90% min.) type fire extinguisher 5.0 Kg. capacity having Mild Steel (ISI-marked, epoxy powder coated) cylinder,Working Pressure: 15–20 bar,Test Pressure: 35 bar (hydrostatic test as per IS 2190), Discharge Time: 13–18 seconds,Effective Range: 3–6 meters as per S:14609, IS:15683:2018, IS:2190 ,including removing of old cylinder and safe disposal of old / unservice able cylinder as per norms ,supply of new approved make fire extinguisher of equivalent capacity, installation at designated location with proper mounting arrangements ,testing and commissioning complete in all respect.Make:-Minimax/Safex Fire Services Ltd./Ceasefire Industries Pvt. Ltd./Kanex Fire.. as directed by the Engieer-in-charge: i/c entire carriage of material in all leads, lifts height and cost of all other incidentals. |
| 18 | Supply, Installation ,testing & commissioning of CO₂ type (Class B ) fire extinguisher 4.5Kg having seamless Manganese Steel / Alloy Steel Cylinder with CO₂ gas having working pressure 50–60 bar at 21°C, robust brass valve, High-pressure reinforced rubber / nylon braided hose,mild steel mounting bracket ,hydrotested at 250 bar as per IS 7285 & IS 15683 and one-years OEM warranty including removing of old cylinder and safe disposal of old / unservice able cylinder as per norms ,supply of new approved make fire extinguisher of equivalent capacity, installation at designated location with proper mounting arrangements ,testing and commissioning, ensuring operation at working pressure (50-60bar) and compliance with BIS IS:15683:2018 compliant, ISI-marked. complete in all respect.Make:-Minimax/Safex Fire Services Ltd./Ceasefire Industries Pvt. Ltd./Kanex Fire.. as directed by the Engieer-in-charge: i/c entire carriage ofmaterial in all leads, lifts height and cost of all other incidentals. |
| 19 | Providing and applying approved anti-corrosive primer on fire-rated steel doors, including surface preparation and masking of hardware, complete.The work includes thorough surface cleaning (removal of dust, grease, rust, old paint if any), light sanding as required, masking of hinges, locks, vision panels and other hardware and application of primer by brush by proper drying, complete in all respects.The primer shall be of approved make such as Asian Paints / Berger Paints / Nippon Paint, as directed by the Engineer-in-Charge.The item includes the cost of all materials, labour, tools & tackles, masking materials, carriage of materials to site in all leads and lifts, and all incidental charges required for satisfactory completion of the work. |
| 20 | Providing and applying two coats of fire-rated paint over primed fire doors, in approved colour, including finishing to a smooth and uniform surface, complete.The work includes light surface preparation, sanding (if required), masking of hardware, application of two coats of fire-rated paint by brush/roller/spray, with proper drying time between coats, and curing, complete in all respect.The paint shall be of approved make such as Asian Paints / Berger Paints / Nippon Paint, as directed by the Engineer-in-Charge.The item includes the cost of all materials, labour, tools & tackles, masking materials, carriage of materials in all leads and lifts, and all incidental charges required for satisfactory completion of the work. |
| 21 | Providing, supplying, fixing, and installation of 6 mm thick toughened clear glass panels of size 12\\" × 36\\"with all edges machine polished, complete. The glass shall be fixed in position using approved quality silicone sealant and suitable beading, ensuring proper alignment, sealing, and finishing complete in all respects. The glass shall be of approved make such as Saint-Gobain / Modi Float Glass / HNG Float Glass, as directed by the Engineer-in-Charge.The item includes cutting (if required), polishing of edges, fixing materials, labour, tools & tackles, carriage of materials to site in all leads and lifts, and all incidental charges required for satisfactory completion of the work. |
| 22 | Providing and fixing of PVC beading strips for fixing of door glass panels, cut to required size and installed in position, complete. The work includes cutting the beading strips to exact dimensions, fixing them using suitable screws or sealant, ensuring proper holding of glass panels, alignment and neat finish, complete in all respects. The beading strips shall be of approved make such as Enkay / Ashirwad Pipes / HIL Limited, as directed by the Engineer-in-Charge. The item includes the cost of all materials, labour, screws, sealant, tools & tackles, carriage of materials to site in all leads and lifts, and all incidental charges required for satisfactory completion of the work. Please Enable Macros to View BoQ information |
