Power Government Departments Closing in 0 days TDR #55171451

Tender For Award Of Central Rate Contract For Repair And Testing Of Damaged 33/11 Kv Power Transformer

Issued by Government Departments · Ajmer, Rajasthan
Tender Value
5 Crore
Estimated cost
Bid Submission
02 Jul 2026
0 days left
EMD
10 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ajmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Award Of Central Rate Contract For Repair And Testing Of Damaged 33/11 Kv Power Transformer , 1.0) Opening Of Transformer Cover, Draining Oil, De-Tanking Core Coil Assembly, Assessment And Estimation For Repair And Replacement Of Part,Providing Locking Arrangement On All Valves & Plugs As Per Requirement Of Specification,Cleaning & Washing Of Dust/ Rust & Dirt From All Other Parts Including Core Tanks & Cooling Tubes, Re-Tank , Variable With Base Date 01.03.2026 , 1.1) For 3.15 Mva Rating , 1.2) For 5.0 Mva Rating , 1.3) For 8.0 Mva Rating , 2.0) Supply Of Following Damaged Parts Requiring Replacement Complete In All Respect, Variable With Base Date 01.03.2026 , 2.1) Hv Leg Coil With Insulation, Varnish & Baking Of Coil Assembly (Vacuum Impregnation)(The Burn Leg Is To Be Retained By Contractor) , 2.2) Lv Leg Coil With Insulation, Varnish & Baking Of Coil Assembly (Vacuum Impregnation)(The Burn Leg Is To Be Retained By Contractor) , 3) Ht Bushing (33 Kv) As Per Relevant Iss. , 4) Lt Bushing (11 Kv) & Neutral Bushing As Per Relevant Iss. , 5) Bushing Rod & Other Metal Parts Including Nuts ( Material & Size Of Bushing/ Rods/Nuts As Per Is Specidfication) , 5.1) For Hv , 5.2) For Lv , 6.0) Set Of Gaskets (Rubberized Cork Neoprene Material & Size Is To Be Needed) , 6.1) For 3.15 Mva Rating , 6.2) For 5.0 Mva Rating , 6.3) For 8.0 Mva Rating , 7.0) Breather Dehydrator (Silicagel Type With Fresh Silicagel) , 7.1) For 3.15 Mva Rating , 7.2) For 5.0 Mva Rating , 7.3) For 8.0 Mva Rating , 8.0) Glass For Oil Level Gauge , 9) Taping Switch Handel Only , 9.1) For 3.15 Mva Rating , 9.2) For 5.0 Mva Rating , 9.3) For 8.0 Mva Rating , 10) Off Loading Taping Switch Without Handle , 10.1) For 3.15 Mva Rating , 10.2) For 5.0 Mva Rating , 10.3) For 8.0 Mva Rating , 11) Oil Drain/ Filter Valve Of Gun Metal , 12) Lt Terminal Plate With Terminals If Required , 13) Fresh Transformer Oil Of Standard Quality Of Isi Mark, Variable With Base Date 01.03.2026 , 14) Filtration Charges If Transformer Oil Supplied By The Nigam / Repairer Of The Transformer , 15) Sundry Items Viz Cover Bolts, Plug Cap Screws, Washers, Insulation Material Etc. With Minor Repairs Of Tank And Other Parts If Any (Denting And Welding Etc. If Required) , 15.1) For 3.15 Mva Rating , 15.2) For 5.0 Mva Rating , 15.3) For 8.0 Mva Rating , 16) Cooling Tubes/ Fins , 17) Conservative Tank With Detachable End Plates. , 18) Dial Type Thermometer 100 Mm Size , 19) Dial Type Thermometer 150 Mm Size With A Set Of Alarm Contact For 3.15 Mva And Above Transformer Rating. , 20) Double Float Buchholz Relay , 21) Rating Plate Made Of Stainless Steel Or Brass Or Alumunium Engraved With Details As Per Specification Including Date Of Despatch Of Transformer After Repair , 22) Earthing Terminals , 23) Air Release Valve , 24) Arcing Horns For Ht Bushing And Lt Bushing Non Adjustable Type , 25) Winding Temperature Indicator With Alarm , 26) Plain Capaliary Type Oil Level Guage To Be Provided On The Oil Conservator With Low Level Indicator , 27) Magnetic Type Oil Level Gauge , 28) Marshalling Box For Transformers , 29) Shut Off Valve (Gun Metal ) 1 1/2 , 30) Painting Inside With Two Coat Of Zinc Chromate Best Paint And Outside Of Transformer With Two Coat Of Grey Paint And Marking After Derusting , 30.1) For 3.15 Mva Rating , 30.2) For 5.0 Mva Rating , 30.3) For 8.0 Mva Rating , 31) To And Fro Transportation Charges From Any Of The Circle Store / Sub Store To The Work Of The Firm And Back , 31) A)Loading & Unloading Charges At Firms Works And Nigams Stores (Both Sides). , 31.A.1) For 3.15 Mva Rating , 31.A.2) For 5.0 Mva Rating , 31.A.3) For 8.0 Mva Rating , 31. B) Transportation Charges Per Km. , 31.B.1) For 3.15 Mva Rating , 31.B.2) For 5.0 Mva Rating , 31.B.3) For 8.0 Mva Rating , 32) Charges For Minor Repair Where Replacement Of Coil Is Not Involved , 32.1) For 3.15 Mva Rating , 32.2) For 5.0 Mva Rating , 32.3) For 8.0 Mva Rating , 33) Labour Charges For Opening The Transformer Tank Top Cover(If Required To Facilitate Maintenance Of Transformer) After Removing Required Accessories.Including All Required T&P Up To 5 Mva Transformer. , 34) Preventing Oil Leakage By Changing Main Gasket With Material After Removing Cover. , 34.1) Upto 1.6 Mva Transformer , 34.2) Above 1.6 Mva & Upto 3.15 Mva Transformer. , 34.3) Above 3.15 Mva & Upto 5 Mva Transformer. , 35) A) Change Of Hv/Lv Bushing Gasket Ring And Rubber Washers Including Supply Of Required Material & Draining /Re-Filling Of Oil As Required. , 35) B) For Additional Hv/Lv Bushing Work. * This Amount Will Not Be Payable Incase The Work Of Removing Of Top Cover Gasket Is Also Awarded In The Same Order. , 36) Change Of Gaskets Of Valves/Radiator / Buchhlozes Relay Including Cost Of Gaskets Etc. , 36.1) Valves/Buchhlozes Relay , 36.2) Radiator Valves. , 37) Providing & Fixing (Including Replacement) Of Hv/Lv Bushing Of Reputed Make & Bushing Rod Of Brass Matel Including Cost Of Gasket & Rubber Rings .Gasket Makes Are Tabross,Tiger, Zebra And Any Other Reputed Make. , 37.A) Hv Side , 37.A.1) Upto 1.6 Mva Transformer , 37.A.2) Above 1.6 Mva & Upto 3.15 Mva Transformer. , 37.A.3) Above 3.15 Mva & Upto 5 Mva Transformer. , 37.B) Lv Side , 37.B.1) Upto 1.6 Mva Transformer , 37.B.2) Above 1.6 Mva & Upto 3.15 Mva Transformer. , 37.B.3) Above 3.15 Mva & Upto 5 Mva Transformer. , 38) Dehydration/Filteration And Reconditioning Of Transformer Oil (Electricity Shall Be Supplied By Deptt.) As Per Norms And Testing Thereof In Presence Of Sub-Station Incharge. , 39) Cleaning Of Oil Scale Deposits Over The Body And Radiators Of Power Transformer With Thinner/Detergent And De-Rusting In Perfect Manner. , 39.1) Upto 1.6 Mva Transformer , 39.2) Above 1.6 Mva & Upto 3.15 Mva Transformer. , 39.3) Above 3.15 Mva & Upto 5 Mva Transformer. , 40) Change Of Following Items: , A) Oil Temperature Indicator , B) Windingtemperature Indicator , C) Silica Gel Container , D) Presser Relief Device Make Atbus , E) Magnetic Oil Level Gauge.Make Atbus , F) Gas Operated Buchhloz Relay( Double Floating Type Make Atbus)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 29-Apr-2026 Technical Corrigendum Technical Bid 14-May-2026
2 29-Apr-2026 Due date extension TN-2111 Date 14-May-2026
3 02-Jun-2026 Due date extension-3 TN-2111 Date 15-Jun-2026
4 14-May-2026 Due date extension-2 TN-2111 Date 01-Jun-2026
5 29-Apr-2026 Technical Corrigendum Technical Bid 15-Jun-2026
6 29-Apr-2026 Due date extension TN-2111 Date 14-May-2026
7 29-Apr-2026 Technical Corrigendum Technical Bid 01-Jun-2026
8 29-Apr-2026 Due date extension TN-2111 Date 14-May-2026
9 14-May-2026 Due date extension-2 TN-2111 Date 01-Jun-2026
10 02-Jun-2026 Due date extension-3 TN-2111 Date 15-Jun-2026
11 14-May-2026 Due date extension-2 TN-2111 Date 01-Jun-2026
12 29-Apr-2026 Technical Corrigendum Technical Bid 22-Jun-2026
13 29-Apr-2026 Due date extension TN-2111 Date 14-May-2026
14 16-Jun-2026 due date extension 4 TN-2111 Date 22-Jun-2026
15 14-May-2026 Due date extension-2 TN-2111 Date 01-Jun-2026
16 29-Apr-2026 Technical Corrigendum Technical Bid 02-Jul-2026
17 29-Apr-2026 Due date extension TN-2111 Date 14-May-2026
18 23-Jun-2026 Due Date Extension-5 Date 02-Jul-2026
19 16-Jun-2026 due date extension 4 TN-2111 Date 22-Jun-2026
20 02-Jun-2026 Due date extension-3 TN-2111 Date 15-Jun-2026

BOQ

Name of Work:- Award of Central Rate Contract for repair and testing of damaged 33/11 KV Power Transformer
Sl. No. Item Description
11.0) Opening of transformer cover, draining oil, de-tanking core coil assembly, Assessment and estimation for Repair and replacement of part,providing locking arrangement on all valves & plugs as per requirement of specification,Cleaning & washing of dust/ rust & dirt from all other parts including core tanks & cooling tubes, re-tank , variable with base date 01.03.2026
21.1) For 3.15 MVA Rating
31.2) For 5.0 MVA Rating
41.3) For 8.0 MVA Rating
52.0) SUPPLY OF FOLLOWING DAMAGED PARTS REQUIRING REPLACEMENT COMPLETE IN ALL RESPECT, variable with base date 01.03.2026
62.1) HV Leg Coil with insulation, varnish & baking of coil assembly (Vacuum impregnation)(the burn leg is to be retained by contractor)
72.2) LV Leg Coil with insulation, varnish & baking of coil assembly (Vacuum impregnation)(the burn leg is to be retained by contractor)
83) HT bushing (33 KV) as per relevant ISS.
94) LT bushing (11 KV) & Neutral bushing as per relevant ISS.
105) Bushing rod & other metal parts including nuts ( material & size of bushing/ rods/nuts as per IS Specidfication)
115.1) For HV
125.2) For LV
136.0) Set of Gaskets (rubberized cork neoprene material & size is to be needed)
146.1) For 3.15 MVA Rating
156.2) For 5.0 MVA Rating
166.3) For 8.0 MVA Rating
177.0) Breather Dehydrator (Silicagel type with fresh silicagel)
187.1) For 3.15 MVA Rating
197.2) For 5.0 MVA Rating
207.3) For 8.0 MVA Rating
218.0) Glass for oil level gauge
229) Taping switch handel only
239.1) For 3.15 MVA Rating
249.2) For 5.0 MVA Rating
259.3) For 8.0 MVA Rating
2610) Off loading Taping switch without handle
2710.1) For 3.15 MVA Rating
2810.2) For 5.0 MVA Rating
2910.3) For 8.0 MVA Rating
3011) Oil drain/ filter valve of gun metal
3112) LT Terminal plate with terminals if required
3213) Fresh transformer oil of standard quality of ISI mark, variable with base date 01.03.2026
3314) Filtration charges if Transformer oil supplied by the Nigam / Repairer of the Transformer
3415) Sundry items viz cover bolts, plug cap screws, washers, insulation material etc. with minor repairs of tank and other parts if any (Denting and welding etc. if required)
3515.1) For 3.15 MVA Rating
3615.2) For 5.0 MVA Rating
3715.3) For 8.0 MVA Rating
3816) Cooling Tubes/ Fins
3917) Conservative Tank with detachable end plates.
4018) Dial type thermometer 100 mm size
4119) Dial type thermometer 150 mm size with a set of alarm contact for 3.15 MVA and above transformer rating.
4220) Double float buchholz relay
4321) Rating plate made of stainless steel or brass or alumunium engraved with details as per specification including date of despatch of transformer after repair
4422) Earthing Terminals
4523) Air release valve
4624) Arcing horns for HT bushing and LT bushing non adjustable type
4725) Winding Temperature indicator with alarm
4826) Plain Capaliary type oil level guage to be provided on the oil conservator with low level indicator
4927) Magnetic type oil level gauge
5028) Marshalling box for transformers
5129) shut off valve (Gun metal ) 1 1/2\\"
5230) Painting inside with two coat of Zinc chromate best paint and outside of transformer with two coat of grey paint and marking after derusting
5330.1) For 3.15 MVA Rating
5430.2) For 5.0 MVA Rating
5530.3) For 8.0 MVA Rating
5631) To and Fro transportation charges from any of the circle store / Sub store to the work of the firm and back
5731) a)Loading & unloading charges at firm's works and Nigam's stores (Both Sides).
5831.a.1) For 3.15 MVA Rating
5931.a.2) For 5.0 MVA Rating
6031.a.3) For 8.0 MVA Rating
6131. b) Transportation charges Per Km.
6231.b.1) For 3.15 MVA Rating
6331.b.2) For 5.0 MVA Rating
6431.b.3) For 8.0 MVA Rating
6532) Charges for minor repair where replacement of coil is not involved
6632.1) For 3.15 MVA Rating
6732.2) For 5.0 MVA Rating
6832.3) For 8.0 MVA Rating
6933) Labour charges for opening the transformer tank top cover(if required to facilitate maintenance of transformer) after removing required accessories.Including all required T&P Up to 5 MVA transformer.
7034) Preventing oil leakage by changing main gasket with material after removing cover.
7134.1) Upto 1.6 MVA transformer
7234.2) Above 1.6 MVA & upto 3.15 MVA transformer.
7334.3) Above 3.15 MVA & upto 5 MVA transformer.
7435) A) Change of HV/LV bushing gasket ring and rubber washers including supply of required material & draining /re-filling of oil as required.
7535) B) For additional HV/LV bushing work.* This amount will not be payable incase the work of removing of Top cover gasket is also awarded in the same order.
7636) Change of gaskets of valves/radiator / Buchhloze's Relay including cost of gaskets etc.
7736.1) Valve's/Buchhloze's Relay
7836.2) Radiator Valves.
7937) Providing & Fixing (including replacement) of HV/LV bushing of reputed make & bushing rod of brass matel including cost of gasket & rubber rings .Gasket makes are TABROSS,TIGER, ZEBRA and any other reputed make.
8037.A) HV Side
8137.A.1) Upto 1.6 MVA transformer
8237.A.2) Above 1.6 MVA & upto 3.15 MVA transformer.
8337.A.3) Above 3.15 MVA & upto 5 MVA transformer.
8437.B) LV Side
8537.B.1) Upto 1.6 MVA transformer
8637.B.2) Above 1.6 MVA & upto 3.15 MVA transformer.
8737.B.3) Above 3.15 MVA & upto 5 MVA transformer.
8838) Dehydration/Filteration and reconditioning of transformer oil (electricity shall be supplied by deptt.) as per norms and testing thereof in presence of sub-station Incharge.
8939) Cleaning of oil scale deposits over the body and radiators of power transformer with thinner/detergent and de-rusting in perfect manner.
9039.1) Upto 1.6 MVA transformer
9139.2) Above 1.6 MVA & upto 3.15 MVA transformer.
9239.3) Above 3.15 MVA & upto 5 MVA transformer.
9340) Change of following items:
94a) Oil temperature indicator
95b) WindingTemperature indicator
96c) Silica gel container
97d) Presser relief device Make ATBUS
98e) Magnetic oil level gauge.Make ATBUS
99f) Gas operated Buchhloz relay( Double floating type make ATBUS) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 55171451
AUTHORITY Government Departments
TENDER VALUE 5 Crore
LAST DATE 02-07-2026
Authority
Authority Name Ajmer Vidyut Vitran Nigam Limited
Work Description Tender for Award Of Central Rate Contract For Repair And Testing Of Damaged 33/11 Kv Power Transformer , 1.0) Opening Of Transformer Cover, Draining Oil, De-Tanking Core Coil Assembly, Assessment And Estimation For Repair And Replacement Of Part,Providing Locking Arrangement On All Valves & Plugs As Per Requirement Of Specification,Cleaning & Washing Of Dust/ Rust & Dirt From All Other Parts Including Core Tanks & Cooling Tubes, Re-Tank , Variable With Base Date 01.03.2026 , 1.1) For 3.15 Mva Rating , 1.2) For 5.0 Mva Rating , 1.3) For 8.0 Mva Rating , 2.0) Supply Of Following Damaged Parts Requiring Replacement Complete In All Respect, Variable With Base Date 01.03.2026 , 2.1) Hv Leg Coil With Insulation, Varnish & Baking Of Coil Assembly (Vacuum Impregnation)(The Burn Leg Is To Be Retained By Contractor) , 2.2) Lv Leg Coil With Insulation, Varnish & Baking Of Coil Assembly (Vacuum Impregnation)(The Burn Leg Is To Be Retained By Contractor) , 3) Ht Bushing (33 Kv) As Per Relevant Iss. , 4) Lt Bushing (11 Kv) & Neutral Bushing As Per Relevant Iss. , 5) Bushing Rod & Other Metal Parts Including Nuts ( Material & Size Of Bushing/ Rods/Nuts As Per Is Specidfication) , 5.1) For Hv , 5.2) For Lv , 6.0) Set Of Gaskets (Rubberized Cork Neoprene Material & Size Is To Be Needed) , 6.1) For 3.15 Mva Rating , 6.2) For 5.0 Mva Rating , 6.3) For 8.0 Mva Rating , 7.0) Breather Dehydrator (Silicagel Type With Fresh Silicagel) , 7.1) For 3.15 Mva Rating , 7.2) For 5.0 Mva Rating , 7.3) For 8.0 Mva Rating , 8.0) Glass For Oil Level Gauge , 9) Taping Switch Handel Only , 9.1) For 3.15 Mva Rating , 9.2) For 5.0 Mva Rating , 9.3) For 8.0 Mva Rating , 10) Off Loading Taping Switch Without Handle , 10.1) For 3.15 Mva Rating , 10.2) For 5.0 Mva Rating , 10.3) For 8.0 Mva Rating , 11) Oil Drain/ Filter Valve Of Gun Metal , 12) Lt Terminal Plate With Terminals If Required , 13) Fresh Transformer Oil Of Standard Quality Of Isi Mark, Variable With Base Date 01.03.2026 , 14) Filtration Charges If Transformer Oil Supplied By The Nigam / Repairer Of The Transformer , 15) Sundry Items Viz Cover Bolts, Plug Cap Screws, Washers, Insulation Material Etc. With Minor Repairs Of Tank And Other Parts If Any (Denting And Welding Etc. If Required) , 15.1) For 3.15 Mva Rating , 15.2) For 5.0 Mva Rating , 15.3) For 8.0 Mva Rating , 16) Cooling Tubes/ Fins , 17) Conservative Tank With Detachable End Plates. , 18) Dial Type Thermometer 100 Mm Size , 19) Dial Type Thermometer 150 Mm Size With A Set Of Alarm Contact For 3.15 Mva And Above Transformer Rating. , 20) Double Float Buchholz Relay , 21) Rating Plate Made Of Stainless Steel Or Brass Or Alumunium Engraved With Details As Per Specification Including Date Of Despatch Of Transformer After Repair , 22) Earthing Terminals , 23) Air Release Valve , 24) Arcing Horns For Ht Bushing And Lt Bushing Non Adjustable Type , 25) Winding Temperature Indicator With Alarm , 26) Plain Capaliary Type Oil Level Guage To Be Provided On The Oil Conservator With Low Level Indicator , 27) Magnetic Type Oil Level Gauge , 28) Marshalling Box For Transformers , 29) Shut Off Valve (Gun Metal ) 1 1/2 , 30) Painting Inside With Two Coat Of Zinc Chromate Best Paint And Outside Of Transformer With Two Coat Of Grey Paint And Marking After Derusting , 30.1) For 3.15 Mva Rating , 30.2) For 5.0 Mva Rating , 30.3) For 8.0 Mva Rating , 31) To And Fro Transportation Charges From Any Of The Circle Store / Sub Store To The Work Of The Firm And Back , 31) A)Loading & Unloading Charges At Firms Works And Nigams Stores (Both Sides). , 31.A.1) For 3.15 Mva Rating , 31.A.2) For 5.0 Mva Rating , 31.A.3) For 8.0 Mva Rating , 31. B) Transportation Charges Per Km. , 31.B.1) For 3.15 Mva Rating , 31.B.2) For 5.0 Mva Rating , 31.B.3) For 8.0 Mva Rating , 32) Charges For Minor Repair Where Replacement Of Coil Is Not Involved , 32.1) For 3.15 Mva Rating , 32.2) For 5.0 Mva Rating , 32.3) For 8.0 Mva Rating , 33) Labour Charges For Opening The Transformer Tank Top Cover(If Required To Facilitate Maintenance Of Transformer) After Removing Required Accessories.Including All Required T&P Up To 5 Mva Transformer. , 34) Preventing Oil Leakage By Changing Main Gasket With Material After Removing Cover. , 34.1) Upto 1.6 Mva Transformer , 34.2) Above 1.6 Mva & Upto 3.15 Mva Transformer. , 34.3) Above 3.15 Mva & Upto 5 Mva Transformer. , 35) A) Change Of Hv/Lv Bushing Gasket Ring And Rubber Washers Including Supply Of Required Material & Draining /Re-Filling Of Oil As Required. , 35) B) For Additional Hv/Lv Bushing Work. * This Amount Will Not Be Payable Incase The Work Of Removing Of Top Cover Gasket Is Also Awarded In The Same Order. , 36) Change Of Gaskets Of Valves/Radiator / Buchhlozes Relay Including Cost Of Gaskets Etc. , 36.1) Valves/Buchhlozes Relay , 36.2) Radiator Valves. , 37) Providing & Fixing (Including Replacement) Of Hv/Lv Bushing Of Reputed Make & Bushing Rod Of Brass Matel Including Cost Of Gasket & Rubber Rings .Gasket Makes Are Tabross,Tiger, Zebra And Any Other Reputed Make. , 37.A) Hv Side , 37.A.1) Upto 1.6 Mva Transformer , 37.A.2) Above 1.6 Mva & Upto 3.15 Mva Transformer. , 37.A.3) Above 3.15 Mva & Upto 5 Mva Transformer. , 37.B) Lv Side , 37.B.1) Upto 1.6 Mva Transformer , 37.B.2) Above 1.6 Mva & Upto 3.15 Mva Transformer. , 37.B.3) Above 3.15 Mva & Upto 5 Mva Transformer. , 38) Dehydration/Filteration And Reconditioning Of Transformer Oil (Electricity Shall Be Supplied By Deptt.) As Per Norms And Testing Thereof In Presence Of Sub-Station Incharge. , 39) Cleaning Of Oil Scale Deposits Over The Body And Radiators Of Power Transformer With Thinner/Detergent And De-Rusting In Perfect Manner. , 39.1) Upto 1.6 Mva Transformer , 39.2) Above 1.6 Mva & Upto 3.15 Mva Transformer. , 39.3) Above 3.15 Mva & Upto 5 Mva Transformer. , 40) Change Of Following Items: , A) Oil Temperature Indicator , B) Windingtemperature Indicator , C) Silica Gel Container , D) Presser Relief Device Make Atbus , E) Magnetic Oil Level Gauge.Make Atbus , F) Gas Operated Buchhloz Relay( Double Floating Type Make Atbus)
Basic Detail
Tender No TN-2111
Bidding Type Tender
Location
City Ajmer
State Rajasthan
Key Dates
Publish Date 29 Apr 2026
Submission Date 02 Jul 2026
Open Date 01 Jan 0001
Finance
Tender Value 5 Crore
Tender Fee 5900
EMD 10 Lakhs
Exemption Available
Document List
GCCSectionII.pdf
ITBSectionI.pdf
Schedule2111.pdf
SPECTN2111.pdf
Tendernotice_1.pdf
99ca9828-ae23-44d7-b4df-5a10698c1033.html
BOQ_985701.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Apr 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
May 14, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 14, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 15, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 01, 2026
18:00 IST

Corrigendum-4 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 15, 2026
18:00 IST

Corrigendum-5 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 14, 2026
18:00 IST

Corrigendum-6 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 01, 2026
18:00 IST

Corrigendum-7 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 14, 2026
18:00 IST

Corrigendum-8 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 01, 2026
18:00 IST

Corrigendum-9 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 15, 2026
18:00 IST

Corrigendum-10 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 01, 2026
18:00 IST

Corrigendum-11 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 22, 2026
18:00 IST

Corrigendum-12 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 14, 2026
18:00 IST

Corrigendum-13 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 22, 2026
18:00 IST

Corrigendum-14 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 01, 2026
18:00 IST

Corrigendum-15 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jul 02, 2026
18:00 IST

Corrigendum-16 Issued

Clarifications on tender conditions and amendments issued.

Completed
May 14, 2026
18:00 IST

Corrigendum-17 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jul 02, 2026
18:00 IST

Corrigendum-18 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 22, 2026
18:00 IST

Corrigendum-19 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 15, 2026
18:00 IST

Corrigendum-20 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jul 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

GCCSectionII.pdf

pdf

ITBSectionI.pdf

pdf

Schedule2111.pdf

pdf

SPECTN2111.pdf

pdf

Tendernotice_1.pdf

html

99ca9828-ae23-44d7-b4df-5a10698c1033.html

xls

BOQ_985701.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders