|
| 1 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed. |
| 2 | M & L for Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and Applying evenly a tack coat of Bitumen VG-10 grade conforming to IS :73 at a rate of application of 5 kg/ 10 sqm complete all as specified and directed. |
| 3 | M & L for Providing and consolidating (consolidated thickness 75mm or less) thick premix Bituminous Macadam using min 4.0% VG 30 grade binder by weight of total mix aggregate gradation as per Grading 2 of Table 500- 1 0 of MORTH specification for road and bridge works 2013 , rolled and compacted to required camber and gradient including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and cambercomplete all as specified and directed. |
| 4 | M & L for Bituminous premix asphaltic dense concrete 30 mm consolidated thickness with 5.50% binder content (VG-30) Grade by weight of total mix, rolled and compacted to required camber and gradient with including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber complete all as specified and directed. |
| 5 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 6 | Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per SSR or manufactures instructions complete all as specified and directed. |
| 7 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 8 | Supply and fixing in repairs solar dealineator made of pipe 80\\" dia, 0.90mtr long, solar lamp dia 3,\\" visibility 500 mtr, material poly carbonate aluminium metal complete all as specified and directed. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed. |
| 10 | M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for pavement , path, floor etc complete all as specified and directed. |
| 11 | M & L in repair for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 12 | Providing and laying in repair 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 13 | M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof kerbs, coping, benching etc including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. Please Enable Macros to View BoQ information |
