Tender For Annual Stage Contract For Restoration / Maintenance /Pre-Emptive Flood Works On Madhumati Nallah, Erin Nallah And Their Tributaries In The Jurisdiction Of Flood Control Sub Division Bandipora For The Year 2026-27.
Tender Value
14 Lakhs
Estimated cost
Bid Submission
02 May 2026
0 days left
EMD
28000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipore → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Stage Contract For Restoration / Maintenance /Pre-Emptive Flood Works On Madhumati Nallah, Erin Nallah And Their Tributaries In The Jurisdiction Of Flood Control Sub Division Bandipora For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by Engineer in-charge:all kinds of soil:-1 meter from cutting edge |
| 2 | 25 meter beyond 1 m from cutting edge |
| 3 | 50 meter beyond 1m from cutting edge |
| 4 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 5 | Ordinary rock |
| 6 | Earth work in bulk excavation by mechanical eans (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 7 | Ordinary rock |
| 8 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kinds of soil. |
| 9 | Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated Earth in layers not exceeding 20 cm in depth. |
| 10 | Deduct for not watering the excavated earth for banking. |
| 11 | Deduct for not rolling with 8 to 10 tonne roller, for not watering and for not breaking clods |
| 12 | Deduct for not rolling with 8 to 10 tonne roller, for not watering and for not breaking clods and for not rolling with 1/2 tonne rolling or ramming |
| 13 | Deduct for not rolling with 8 to 10 tonne roller, for not watering and for not breaking clods and for not rolling with 1/2 tonne rolling or ramming and for not dressing of embankment also (only banking is done) |
| 14 | Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in All kinds of soil. |
| 15 | Deduct for not rolling with 8 to 10 tonne roller. |
| 16 | Deduct for not rolling with 8 to 10 tonne roller, for not watering also. |
| 17 | Deduct for not rolling with 8 to 10 tonne roller, for not watering and for not breaking clods also. |
| 18 | Deduct for not rolling with 8 to 10 tonne roller, for not watering and for not breaking clods and for no 1/2 tonne rolling. |
| 19 | Deduct for not rolling with 8 to 10 tonne roller, for not watering and for not breaking clods and for no 1/2 tonne rolling and for not dressing of embankment also |
| 20 | Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil. |
| 21 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 22 | Hand-packing stones in wire-crates; excluding cost of crates and excluding cost of stones. |
| 23 | Providing and Laying of Stone Soling Hand Packed tightly and compacted manually |
| 24 | Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12 (D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @ 3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per direction of Engineer-in-charge. |
| 25 | with quarry stone |
| 26 | Dumping stone excluding cost of stones. In Horizontal on level |
| 27 | Construction of bolder bunds by way of excavating & filling of boulders loosely without handpacking & rolling beyond the 50mtr intial lead by mechanical means of available materials from the nallah prepheries including of all leads & lifts stack measurements reduceed by upto 25% |
| 28 | Supply of boulders excluding carriage. From approved source |
| 29 | Supply of Quarry stones excluding carriage. Source to material |
| 30 | Collection/Extraction of boulders and stones from different pockets of nallah for head load involved items only |
| 31 | Labour charges for Filling empty cement bags with sand/ earth; including cost of sewing and strings; excluding cost of bags and Earth (1 Cft) |
| 32 | Labour charges for Filling Mega bags with sand/ earth; including cost of sewing and strings; excluding cost of bags and Earth (26 Cft) |
| 33 | Labour charges for Filling Geo bags with sand/ earth; including cost of sewing and strings; excluding cost of bags and earth (2.83 cft) |
| 34 | Supply and stacking of sand at site with Geo Taged photographs / Royality of material from source to be enclosed |
| 35 | Extraction/ collection and stacking of Boulders within nallah pheriphery excluding all carraiges |
| 36 | Hire charges of vehicle during day or night along with licensed commercial driver for site inspection / emergency situation/movement of officials / carriage of material within divisional jurisdiction including Driver and POL on need basis subject to approval of competant authority / Xen. Upto 30Km Journey |
| 37 | For every additional Km after 30 Km |
| 38 | Dry stone pitching (any thickness) excluding cost of stones.On Horizontal |
| 39 | .On Slopes |
| 40 | On Top copings of banks |
| 41 | Dry stone pitching, 225mm thick, including cost of stones and preparation of surface. Quarry stone |
| 42 | Nallah stone |
| 43 | Opening out old wire crates those and re-binding after filling. |
| 44 | Loading/Unloading sand/ earth filled EC bags in lorries; lead upto 50m. |
| 45 | Placing in dry |
| 46 | Placing in Water |
| 47 | Loading/Unloading sand/ earth filled Mega bags in lorries; lead upto 50m. |
| 48 | Placing in dry |
| 49 | Placing in Water |
| 50 | Loading/Unloading sand/ earth filled Geo bags in lorries; lead upto 50m. |
| 51 | Placing in dry |
| 52 | Placing in Water |
| 53 | Supply and Stacking of good earth at site excluding carraige |
| 54 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah |
| 55 | Quarry |
| 56 | for stones available at site (quarry stones) |
| 57 | Dry random rubble masonry with hard stone in foundation and plinth:Nallah |
| 58 | with bond stones (Quarry) |
| 59 | without bond stone (nallah) |
| 60 | Engagement of labour / Beldar, Mazdoor /collie |
| 61 | Bhisti |
| 62 | Sundries |
| 63 | Chowkidaar |
| 64 | Fitter |
| 65 | Assistant Fitter |
| 66 | Blacksmith Ist Class |
| 67 | Blacksmith 2nd Class |
| 68 | Mason |
| 69 | Carpenter 1 class |
| 70 | Carpenter 2 class |
| 71 | Painter |
| 72 | Hire charges of J.C.B including fuel, driver and Crawling charges etc complete job (Idle charges) payment shall be made on the basis of progress with Geo- Tagged photographs (subject to approved from Xen) |
| 73 | Hire charges of J.C.B including fuel, driver and Crawling charges etc complete job (Runningcharges) payment shall be made on the basis of progress with Geo- Tagged photographs |
| 74 | Hire charges of Chain Mounted Earth moving equipment LNT etc including fuel ,driver and Crawling charges etc complete job (Idle Charges) on the basis of porgress, with Geo-Tagged photographs, (subject to approved from Xen |
| 75 | Hire charges of Chain Mounted Earth moving equipment LNT etc including fuel ,driver and Crawling charges etc complete job (running Charges) on the basis of porgress, with Geo-Tagged photographs |
| 76 | Hire charges of Tippers including fuel, driver etc Running Charges (incase of un measured / urgent works to be carried out on war footing basis beyond the items already were surplus / excavated material included to be disposed as per discription of items) |
| 77 | Hire charges of Tippers including fuel, driver etc Idle Charges (incase of un measured / urgent works to be carried out on war footing basis beyond the items already were surplus / excavated material included to be disposed as per discription of items) |
| 78 | Hire charges of Tractors including fuel, driver etc complete job Running Charges (incase of un measured / urgent works to be carried out on war footing basis beyond the items already were surplus / excavated material included to be disposed as per discription of items) |
| 79 | Hire charges of Tractors including fuel, driver etc complete job Idle Charges (incase of un measured / urgent works to be carried out on war footing basis beyond the items already were surplus / excavated material included to be disposed as per discription of items) |
| 80 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30cm girth upto and including 60cm girth. |
| 81 | Beyond 60cm girth upto and including 120cm girth |
| 82 | Supply, laying, Placing of 200 gsm Polyethene sheets in level, on slopes, duly fixed, anchored at intake channels, Headworks , Canals, water ways, Collection chambers etc as per the site requirement and directions of Engineer I/C. |
| 83 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete 900 mm dia. R.C.C. pipe |
| 84 | 600mm |
| 85 | 450mm |
| 86 | 300mm |
| 87 | Supply of A4 Paper 75 GSM paper for Sub divisional Use |
| 88 | Supply of A3 Paper 75 GSM paper for Sub divisional Use |
| 89 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 90 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 91 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 92 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level; 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 93 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level; 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 94 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 95 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 96 | Suspended floors, roofs, landings, balconies and access platforms. |
| 97 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 98 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 99 | Slip clearance; In soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. with photographic evidance |
| 100 | Slip Clearence :-In ordinary soils disposal lead upto 50 m and lift upto 1.5 m. |
| 101 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 102 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded. |
| 103 | Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. Mild steel and medium tensile steel bars. |
| 104 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 105 | Open timbering over areas including strutting, shoring etc. complete (Measurements to be taken of the face area timbered):Depth not exceeding 1.5 m. |
| 106 | Depth exceeding 1.5 m but not exceeding 3 m |
| 107 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 108 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive. |
| 109 | Silt clearance from canals. Inclusive of initial lead and lift ( 50m & 1.5m respectively):Dry |
| 110 | Shingle clearance from canals. |
| 111 | Desilting of canals by mechanical means (Hydraulic excavator) incld. Disposal of excavated materials upto to dumping site complete job (wet) |
| 112 | 12mm cement plaster of mix 1:4 (1cement : 4 fine Sand) |
| 113 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 114 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 115 | Providing and Laying PVC Pipe Of approved brand and quality including all carriages (Type-B) incld. All accessories complete) 250 mm |
| 116 | 200 mm |
| 117 | 150 mm |
| 118 | 100 mm |
| 119 | Providing and laying in position Precoated galvanised iron profile sheet 0.50 mm TCT, as per the directions of engineer in-charge. |
| 120 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 121 | Providing woodwork in frames of false ceiling,partitions etc. sawn and fixed in position including all accessories including all carriages complete job (popler wood) |
| 122 | Supply of black annealed wire crates mesh 4\\"x4\\" mesh made of 4 mm dia BA wire machine woven both ends bent |
| 123 | Supply of long boots. |
| 124 | Supply of ink for Epson printer of 127 ml (black colour) |
| 125 | Supply of colour ink for Epson printer (70 ml) |
| 126 | Supply of tonner ink for HP printer (model 1020 laser jet plus) |
| 127 | Providing electrification (Lighting Point) using 1.50mm insulated coper wire through PVC Conduits including providing and fixing of ON/OFF 5 Amp Switch (Modular) including LED Lights warm and white 12 Watt of approved make complete job as per directions of Engineer In Charge. Including cost of PVC Conduits |
| 128 | Providing electrification (Heating Point) using 4.00mm insulated coper wire through PVC Conduits including providing and fixing of ON/OFF 15 Amp Switch (Modular) of approved make complete job as per directions of Engineer In Charge. Including cost of PVC Conduits |
| 129 | Supply, Installation, Testing and Commissioning of Ceiling Fan of approved brand and manufacture, complete job as per direction sof Engineer In Charge. |
| 130 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 131 | Providing and laying Boulder / GSB / Sand filling of including all carriages of material complete. |
| 132 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in In cement mortar 1 cement: 6 fine sand mortar. |
| 133 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 134 | Providing and Laying of 40mm thick concrete flooring in rooms in M-15 (1:2:4) nominal mix (max size of aggregate 20mm) concrete. |
| 135 | Providing and applying average 12 mm thk cement plaster in single coat incement sand mortar 1:6 to all surfaces at all levels including surface preparation, staging, scaffolding as directed. |
| 136 | Providing and applying average 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) including surface preparation, staging, scaffolding as directed. |
| 137 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 138 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 139 | Wall lining butch work upto 10 m height with Dholpur stone 40mm thick rough facing on the exposed surface with stone strips of minimum length 300mm and required width including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75 x 75mm and by providing layer of 75 thick strips including 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including ruled pointing in cement mortar 1: 2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of the stone and curing complete as per the directions of engineer-in-charge. |
| 140 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour or shade 16mm thick |
| 141 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 142 | Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. |
| 143 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 144 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 145 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work |
| 146 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 147 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD German |
| 148 | Providing and Fixing of 40 x 5mm MS Hold Fast 40cm Long including fixing to frames embedded in cement concrete block in 1:3:6 Mic including all carraiges. |
| 149 | Providing and fixing 35mm Thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge KD Wood |
| 150 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside rooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. KD Wood |
| 151 | Providing of Ornamental hand wood carving on Doors surfaces of approved design, pattern and shape complete job as per direction of Engineer In charge,D-4 (1 Sides+1 Side) |
| 152 | Providing and fixing glazed 35mm Thick shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws KD Wood |
| 153 | Providing and fixing 4mm thick float glass in glazed doors, windows and clerestory window shutters including cost of wooden beading complete job as per directions of Enginner in Charge. |
| 154 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 155 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 156 | Providing and fixing of the following Hardware fittings. Brass Handle 12\\" Long |
| 157 | Brass Handle 9\\" Long |
| 158 | Aldrop 12\\" Long |
| 159 | Tower Bolt 9\\" Long |
| 160 | Tower Bolt 6\\" Long |
| 161 | Handle 6\\" mm |
| 162 | Providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. |
| 163 | Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete. |
| 164 | Providing and fixing of Track dac powder coated sheet roofing including cost of screws, etc in roofs, walls, gables, etc complete as per directions of engineer in charge. |
| 165 | Providing and fixing of Powder coated ridges or hips of width 30cm over all width plain G.I sheet fixed with nails. |
| 166 | Providing and fixing of planed eaves boarding 250x32 mm (nominal size) size of 2nd class kail wood |
| 167 | Providing and fixing of 10mm thick Ready made wooden Panneling in sofits including cost of Budloow Wood Frame Work 50 x 40mm Section @ 600mm c/c bothways including cost of screws, etc in Softs, walls, gables, etc complete as per directions of engineer in charge. |
| 168 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Phool |
| 169 | Providing and fixing of 12mm thick Ply Wood in ceiling for bas eof Khatambandi including the cost of frame work of Budloo Wood of 50mm x 50mmw @ 600mm C-C including cost of nails, screws complete job as per direction of Engineer In Charge. |
| 170 | Providing and fixing of Ornamental Wooden Cornice 35x 35mm of approved design and shape of 1st Class Budloo wood. |
| 171 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish. |
| 172 | Providing and laying of Dry random rubble masonry with hard stone in foundation and plinth using quarry stone. |
| 173 | Construction of brick masonry man hole in cement mortar 1:4 (1 cement: 4 coarse sand) , foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size finished with a floating coat of neat cement complete. Size 45 x 45 x 45cm deep including PVC manhole cover with frame. |
| 174 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 175 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 176 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 177 | Providing and fixing of PVC pipe (Type “B”) in proper gradient. 100mm Dia |
| 178 | 75mm Dia |
| 179 | 100mm Dia Plain Bend |
| 180 | P-Trap 100mm |
| 181 | 100mm Dia Plain Tee |
| 182 | 100mm Dia Door Bend |
| 183 | Reducer 100mm to 75mm |
| 184 | 75mm Dia Plain Bend |
| 185 | Door junction 75x75x75mm |
| 186 | 75mm Dia Floor Trap |
| 187 | Cowel 75mm |
| 188 | PVC collar 100mm |
| 189 | PVC collar 75mm |
| 190 | Providing and placing on terrace (at all floor levels) polythene water storage tank with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but excluding all fittings and the base support for tank |
| 191 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc: 20mm nominal outer dia pipes. |
| 192 | 25mm nominal outer dia pipes. |
| 193 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc. 32mm nominal outer dia pipes. |
| 194 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board Size: 510x1040mm bowl depth 250mm |
| 195 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 196 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 197 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 198 | Providing and fixing of Two in One Angle Valve of approved make including all accessories complete. (ISI marked) |
| 199 | Providing and fixing of Wall Mixer of approved make including all accessories complete. (ISI marked) |
| 200 | Providing and fixing of Health Fuacet with chain of approved make including all accessories complete. (ISI marked) |
| 201 | Providing and fixing of CP Towel Rod 600mm Long of approved make including all accessories complete. |
| 202 | Providing and fixing of CP Soap Case of approved make including all accessories complete. |
| 203 | Providing and fixing of CP Connection 600mm-450mm long of approved make including all accessories complete. |
| 204 | Providing and fixing of CP Grating of approved make including all accessories complete. |
| 205 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. |
| 206 | Providing and fixing of CP Cups of approved make including all accessories complete. |
| 207 | Providing and fixing of Stain less steel paper holder with stand of approved make including all accessories complete. |
| 208 | Providing and fixing of Stainless steel paddle operated dustbin of approved make including all accessories complete.For Washrooms |
| 209 | Providing and fixing of the 300mmx 300mm Exhaust Fan (Crompton Make) as per approved specifications, complete.For Washrooms |
| 210 | Providing and fixing of 50 Ltr water heater (geysers) of approved make including cost of dash fasteners with nuts and washers, complete.For Kitchen |
| 211 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 212 | Supply, Installation, Testing and Commissioning of 10Sqmm two core XLPE armoured Aluminium cable make Havells, Phillips, Bajab including cost of Conduit for laying of cable 200mm below ground level.Main Supply |
| 213 | Supply, Installation, Testing and Commissioning of Ceiling Fan of approved brand and manufacture, complete job as per direction sof Engineer In Charge. |
| 214 | Earthing System : Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. |
| 215 | Supply installation testing & commissioning of exterior-rated architectural wall mounted IP67, led up & down light fixture with brackets/clamps (as per application). The power consumption should not be more than 2 x 5 watts, System lumen output should not be less than 2 x 300 lumens (Tolerance ±15%), up & down 30 degree beam angle, CCT 3000K. The housing material should be extruded aluminum, powder-coated finish, luminaire body color should be similar to the facade color surface where the luminaire is to be installed with anti-aging and anti-UV high optical efficiency PMMA lenses, Clear tempered glass cover. It should have CRI>80, SDCM≤4. The driver should be remote non dimmable with PF>0.9 & THD<20%. Leader cables, jumper cables, IP67 connectors are inclusive. Minimum IK06. Operating temperature should be of -20°C to 50°C range. Lifetime of luminaire (L70 @ Ta-35deg C) should be at least 50,000 burning hours. Luminaire should have corrosion resistance with self declaration of ASTM B117 for 500 hours of salt spray test. All mounting accessories shall be stainless steel (Minimum -316) for all lighting fixtures. The luminaire should be BIS certified. This includes all the required hardware, equiepment/controller, software etc. for successful operation of the luminaire. (All the technical parameters of luminaire need approval from lighting designer |
| 216 | Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 217 | Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 218 | Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 219 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as Required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 220 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 221 | Supplying, erecting & terminating XLPE armoured cable 1100 V. 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe |
| 222 | Supply and laying of manhole frame and cover Cast Iron heavy duty (2'-0\\" x 2'-0\\") of specified design and dimensions as directed by Engineer In Charge.Septic Tank & Sockage Pit |
| 223 | Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).1)Main Board,2)Sinage boards small size. |
| 224 | Providing and fabrication of 450mm Deep Storage Allimarah/ ward robes of approved quality 19mm Thick Waterproof Ply board in sides, shelves and wherever required including 4mm thick ACP sheet on back and providing and fixing of MDF shutters of approved quality, design and drawings including painting two or more coats of synthetic enamel paint of approved quality and color inside including cost of following aluminum fittings and locks of Godrej/Link make. (For payments front face to be measured). |
| 225 | Providing and fixing Honor Roll for Sub-Divisional Office (12mm) acrylic material with radium golden works writing size 48\\"x30\\" |
| 226 | providig, fabrication and supplying of MS storage pe racks made of 1.2mm thick MS perforated powder coated sheets at approved color, shape, design and as per directions of Engineer in Charge (size 4'-0x8-0x1'-3\\") |
| 227 | Providing and fixing of wall paper for sub-divisional office as per approved brand |
| 228 | Constructing vertical bunds with sloping faces, by boulder filling ( dry , hand packed tightly); including cost of stones but excluding cost of wire crates |
| 229 | Providing laminated veneer lumber conforming to IS 14616 and TAD-15: 2001 (part-B) in factory made frame of doors windows, clerestory windows an dother frames wrought framed and fixed in position with hold fast lugs or withdash fastenders of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). |
| 230 | Providing hoisting and fixing trusses / purlins / rafters/ posts / post-plates or like components incudign cost of screws etc complete. Popular wood |
| 231 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work). 15 mm dia. nominal bore |
| 232 | 20 mm dia. nominal bore |
| 233 | Providing and fixing PPR unions, socket, plugs, tree etc. PPR 25mm |
| 234 | PPR 32mm |
| 235 | PPR 40mm |
| 236 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 237 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 238 | Providing and fixing of 6mm thick pvc panelling of approved brand |
| 239 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-inchargeInternal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe, PN-16 pipe , 25mm OD(SDR-7.4) |
| 240 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 241 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts in cement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead: Door chowkhats |
| 242 | Window chowkhats |
| 243 | Clerestory window chowkhats |
| 244 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 245 | Renewing wooden beams in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete, including removal of rubbish to dumping ground within 50 meters lead : 14.17.1 Not exceeding 4.00 meters in length. 14.17.1.1 Sal wood beams |
| 246 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 247 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 248 | supply of radiator of approved band 11 veine (2500watt or above) including all alllie accessories, complete job as per directions of Engineer in charge |
| 249 | Supplying and installation of luminous inverter NXG 1150 VA including battery 200 Ahr complete job |
| 250 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 251 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 252 | installation of MDF panelleing jaffering work inclucing cost of nails all works complete |
| 253 | Supply of heating blowers of aproved brand of 2KW |
| 254 | Tipping stone-filled wire crates in position; including equipment charges. |
| 255 | Extra for every additional lift of 1.5 m or part there of beyond 1.5 m height for hand-packing of stones in wire-crates |
| 256 | Supply & installation fo RCC Pegs 4' (8\\" diameter) 1:1.5:3 mix |
| 257 | supply of measuring tap (50m) |
| 258 | Supply of polymer ropes of 3/4\\" dia |
| 259 | supply of luminous torch (serch light) |
| 260 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 261 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 262 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm |
| 263 | Extra for every additional lift of 1.5 m or part there of beyond 1.5 m height for hand-packing of stones in wire-crates |
| 264 | P/F of wooden pannelling work using imported Wood including frame work made from 50x50mm wooden section of same type to prepare smooth base, c/o nails, wooden polish, all types of carriages complete in all respects. |
| 265 | Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 12mm thick (second class teak wood) |
| 266 | Carraige of materials by Mechanical transport Earth upto 1 km |
| 267 | Beyond 5 Km upto 10 km /km |
| 268 | Beyond 10 Km upto 20 km /km |
| 269 | Beyond 20 km /every additional Km |
| 270 | Crates upto 1 km |
| 271 | Beyond 5 Km upto 10 km /km |
| 272 | Beyond 10 Km upto 20 km /km |
| 273 | Beyond 20 km /every additional Km |
| 274 | Stone upto 1 km |
| 275 | Beyond 5 Km upto 10 km /km |
| 276 | Beyond 10 Km upto 20 km /km |
| 277 | Beyond 20 km /every additional Km |
| 278 | EC Bags upto 1 kms |
| 279 | Beyond 5 Km upto 10 km /km |
| 280 | Beyond 10 Km upto 20 km /km |
| 281 | Beyond 20 km /every additional Km |
| 282 | 40 mm Agregrate Km |
| 283 | Beyond 5 Km upto 10 km /km |
| 284 | Beyond 10 Km upto 20 km /km |
| 285 | Beyond 20 km /every additional Km |
| 286 | 20 mm Agregrate 1 Km |
| 287 | Beyond 5 Km upto 10 km /km |
| 288 | Beyond 10 Km upto 20 km /km |
| 289 | Beyond 20 km /every additional Km |
| 290 | Sand 1 km |
| 291 | Beyond 5 Km upto 10 km /km |
| 292 | Beyond 10 Km upto 20 km /km |
| 293 | Beyond 20 km /every additional Km |
| 294 | R.C.C spun pipes/DI pipes 600 mm 1 km |
| 295 | Beyond 5 km upto10 km per km |
| 296 | Beyond 10km upto 20 km per km |
| 297 | Beyond 20 km /every additional Km |
| 298 | 450 mm 1 km |
| 299 | Beyond 5 km upto10 km per km |
| 300 | Beyond 10km upto 20 km per km |
| 301 | Beyond 20 km /every additional Km |
| 302 | 300 mm 1 km |
| 303 | Beyond 5 km upto10 km per km |
| 304 | Beyond 10 km upto 20 km per km |
| 305 | Beyond 20 km /every additional Km |
| 306 | 250 mm 1 km |
| 307 | Beyond 5 km upto10 km per km |
| 308 | Beyond 10km upto 20 km per km |
| 309 | Beyond 20 km /every additional Km |
| 310 | Bricks (75 Kmt Lead) |
| 311 | Carraige of materials by Manual Means Earth for first 50 mtrs. |
| 312 | for every additional 50 mtrs |
| 313 | Boulders for first 50 mtrs. |
| 314 | for every additional 50 mtrs |
| 315 | Bags for first 50 mtrs. |
| 316 | for every additional 50 mtrs |
| 317 | First 50 metres First 50 metres mtrs 600mm |
| 318 | 450mm |
| 319 | 300mm |
| 320 | 250mm |
| 321 | Additional (50 metres) 600mm |
| 322 | 450mm |
| 323 | 300mm |
| 324 | 250mm |
| 325 | Stone For First 50 Mtrs |
| 326 | for every additional 50 mtrs |
| 327 | 40 mm Aggreagate For First 50 Mtrs |
| 328 | for every additional 50 mtrs |
| 329 | 20 mm Aggregate For First 50 Mtrs |
| 330 | for every additional 50 mtrs |
| 331 | Sand For First 50 Mtrs |
| 332 | for every additional 50 mtrs |
| 333 | Crates for 50 mtrs |
| 334 | for every additional 50 mtrs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Apr 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMay 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender