|
| 1 | High Mast Light: Supply of hot dipGallvanized 16 MTRS HIGH MAST FABRICATED PART AS PER DIMENSION:TOP DIA. 150 mm, BOTTOM DIA 540 mm, SECTION 2 nos. (SECTION LENGTH 8300) THICKNESS 4,3 mm. BASE PLATE Dia. 570 mm X 30 mm., PCD 490 mm, with following items: High Mast sections with Base Plate, Lantern Carriage suitable to fix upto 9 nos. (400 W LED) luminaries symmetrically in 9 nos. welded arm, 3 suspension Head frame, L-Stopper (3 Nos.), Mounting Plates, provision for one number of Aviation lamp, Lightening Arrestor and Earthing Pipe (MS GI). Suitable for basic wind speed 250kmph.ACCESSORIES PART:Double Drum Winch 350 Kg. (Gear Ratio 53:1), 1.5 HP Motor (3Ph, 415 V) , Ø6 mm. SS Wire Rope (Grade-AISI 316 ), Manual Operating Handle, Trailing Cable (1 sets 5 core x 2.5 sq. mm. EPR PCP Round Copper), GI Junction Box,1-nos AOL, & Feeder Pillar-Control Switch , (Without Luminaries)FOUNDATION ACCESSORIESBolt M24 x 1200 (8 Nos.) with Template and Anchor Plate.,AOL bracket and 1set consists of 8nos. of M30X850 mm bolts witrh Anchor plate and 10% templates (Make Bajaj/Utkarsh/Panasonic or equivalent) |
| 2 | Supply of 400 watt LED flood light compries of die cast aluminium houshing powder coated in grey with UV stabilized toughened glass toughened glass with luminus flux 40000lumen beam angel 30degree CCT 5700 K CRL 7050000burning hours as per L70B50 report PF>0.95 THD <10% driver type constant current isolated intergral having LED driver Cat Ref ENDRV-130-700-100W. Internal surge protection 4KV & 1K 07 protection with IP66 .Net weight should be approx. 10.3kg (Make: Cat No. PFLM20ZH8 of Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 3 | Supply of LED aviation lampPanasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 4 | Foundation & erection of high mast pole along with all materials & labour M20 concrete with pilling of 450mm dia 3 mtr long, as per direction of engineer in charge as per approved design |
| 5 | Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary with charcoal and salt as required. |
| 6 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type timer panel with 32A 4P MCB ,40A TP CONTACTOR ,TIMER with 15 nos 10A SP MCB C as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for 2 years after acceptance of materials.(Make: Legrand/Schneider/L&T/ABB or equievalant make & model) |
| 7 | Supply & Fixing of 3 core 2.5 sqmm. Copper armoured XLPE cables insulated ISI marked.(Make: POLYCAB/KEI/HAVELLS/Gloster/Finolex/RR Kabel/Eq.) as per direction of Engg.-in-charge. |
| 8 | Supply of following PVC Aluminium armoured XLPE cables insulated ISI marked .(Make- Havells/ Polycab/ KEI / V-Guard/ Gloster)4Cx16 sqmm |
| 9 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 4Cx16 sqmm |
| 11 | Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge. |
| 12 | Supply & Laying of 40mm PN10 HDPE PIPE & Cable 1.1 KV, AYFY 4X16 sqmm. Under 700mm depth (depth may vary at site) under the road by filling sand & brick as per direction of Engg.-in-charge. |
| 13 | Providing and fixing 6 SWG G.I. wire on surface or in recess for loop earthing along with existing surface / recessed conduit as required. Please Enable Macros to View BoQ information |
