|
| 1 | M&L for Factory made Machine pressed pre-cast cement concrete interlocking paver block of any shape and size with glossy finish on top, confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and pigment, with and laid over and including 50mm thick sand cushion (crushed stone sand / M sand) under interlocking paver block, including watering and consolidation, complete all as specified and as directed. |
| 2 | All as per Serial Item No. 1 here-in-before but except paver blocks, complete all as specified. Note: Serviceable paver blocks obtained from serial item item No.1 here in before shall be used. |
| 3 | M&L for Factory made Machine pressed pre-cast cement concrete interlocking paver block of any shape and size, confirming to IS 15658-2006 of 80mm thick, M-40 grade with grey cement and pigment, with and laid over and including 50mm thick sand cushion (crushed stone sand / M sand) under interlocking paver block including watering and consolidation, complete all as specified and as directed. |
| 4 | All as per Serial Item No. 3 here-in-before but except paver blocks, complete all as specified. Note: Serviceable paver blocks obtained from serial item item No.1 here in before shall be used. |
| 5 | M&L for PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in foundation, filling and mass concrete, complete all as specified and as directed. |
| 6 | M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base, with and including demolition of existing cement concrete of any description (unreinforced) in ground floor, complete all as specified and as directed. |
| 7 | M&L for 50mm thick PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base, with and including demolition of existing cement concrete of any description (unreinforced) in ground floor, complete all as specified and as directed. |
| 8 | M&L for PCC 1:2:4 type B2 (using 40mm graded granite stone aggregate) as in surface channels and drains, with and including demolition of existing cement concrete [unreinforced] in ground floors and paving's n exc 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 9 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 10 | M&L for Forming extra fair finished drain or channel of 45cm inner grith or width in cement concrete using extra cement with and including forming moulds / stopped ends etc., complete all as specified. |
| 11 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:4 finished even and fair without using extra cement, complete all as specified and as directed. |
| 12 | M&L for applying two coats of cement base paint of any colour as approved, with and including preparation of newly plastered wall surfaces, all as per manufacturer's instructions, complete all as specified and as directed. |
| 13 | M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss nad efforescent salts, oils & greasy spots etc., and two coats of oil bound distemper over a coat of alkali resistant primer with and including a layer of wall care putty and including preparation of old surfaces of any description, complete all as specified and as directed. |
| 14 | M&L for Complete removal of existing treatment on old walls & cleaning with high pressure water jet pump and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, with and including preparation of old decorated surfaces of wall, complete all as specified and as directed. |
| 15 | M&L for Hardcore of gauge not exc. 63mm, broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 16 | M&L for Rubber coated chequered cement concrete coloured tiles 23-25mm thick, of approved shape and size, as in floor / path, set, jointed and pointed in neat cement slurry with grey cement and pigment, glosy finish on top, laid over and including 15mm thick screed bed in CM 1:4, including demolition of old floor tiles of any thickness with bedding mortar, complete all as specified. Please Enable Macros to View BoQ information |
