|
| 1 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 2 | Separating, scraping and cleaning of reinforcement steel obtained from RCC demolition complete all as specified and directed.Note: Demolition of concrete will be measured and paid separately |
| 3 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 4 | Demolition of precast RCC jalli fixed in any position and in any mortar complete all as specified and directed. |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (not exceeding 1.5 m in width not exc 10 sqm or 10 sqm on plan) in all kind of soil including getting out and disposal of excavated earth/ rock lead upto 500 m and lift upto 1.5m complete all as specified and directed. |
| 6 | M&L for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed. |
| 7 | M&L for RCC M-25 grade (design Mix) (using 20 mm graded stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 8 | M&L for RCC M-25 grade (design Mix) (using 20 mm graded stone aggregate) Columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 9 | M&L for RCC M-25 grade (design Mix) (using 20 mm graded stone aggregate) Beams, bands, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 10 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surface flat with fair finished surfaces complete all as specified and directed. |
| 11 | M&l for Formwork sides of pillars, posts, struts, piers, columns and stanchions.; vertical or to batter surface flat and fair finished surfaces complete all as specified and directed. |
| 12 | M&l for Formwork to Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc..; vertical or to batter surface flat and fair finished surfaces complete all as specified and directed. |
| 13 | M&L CRS (Corossion Resistance steel) grade FE-550 TMT reinforcement bars 10mm and over using cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and directed. |
| 14 | ditto as above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders round bars complete all as specified and directed. |
| 15 | M&L for modular size brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed |
| 16 | Taking down cement plaster on brick/ concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 17 | Rendering 15 mm thick on fair face of brick work or concrete surfaces or brick masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed.Note:- Warranty of paint should not less than 05 years. |
| 19 | M&L for preparation of old plastered or unplastered surfaces in walls soffits, facia, chajjas and applying one coat of exterior weather proof water based emulsion complete all as specified and directed.Note:- Warranty of paint should not less than 05 years. |
| 20 | M&L Providing, cement concrete 1:2:4 type B1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork complete all as specified and directed. |
| 21 | M & L cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 22 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 23 | M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 24 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls complete all as specified and directed. |
| 25 | S &F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde E-250) quality A complete all as specified and directed. |
| 26 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured) |
| 27 | S & F GI Concertina coil, punched tape 2.50mm dia (minimum) high tensile spring steel wire, dia of coil 600mm, when stretched the length shall be 6m in one coil and tied to barbed wire with and incl provision of steel slips @ 5 clips spiral in one row complete without coating complete all as specified and directed. |
| 28 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed |
| 29 | M&L for providing precast cement concrete type B-0 1:2:4 (12.5mm graded stone aggregates) louvres and jallies, 25mm thick (measured solid) all mouldings but excluding frame including two coat of cement based painting and demolition of old precast/stone jallies fixed in any mortar and pattern complete all as specified and as directed. |
| 30 | Removal of surplus demolished bldg material from the site exc. 1 km and depositing where directed (01 load will be counted as 2.50 cum of tractor trolley vehicle or equivalent) complete all as specified and directed. |
| 31 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft disintegrated rock complete all as specified and directed. |
| 32 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable pipe and getting out in soft disintegrated rock and making good the disturbed surface by filling PCC 1:2:4 type B-1 using 20 mm graded course aggregate to match with existing surfaces complete all as specified and directed. |
| 33 | Removing of excavted soil/rock to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. |
| 34 | M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 35 | Supplying and laying Class LV, Type I, flat, size 250mm x 150mm x 40mmfor cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed. |
| 36 | Supply and fix, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 4 core all as per IS , complete all as specified and directed. |
| 37 | Supply and fix, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 25 sqmm 4 core all as per IS , complete all as specified and directed. |
| 38 | Supply and fix of light grade Galvanised mild steel pipe 40 mm bore complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable proction . (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule ) |
| 39 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed. Please Enable Macros to View BoQ information |
| 40 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed. Please Enable Macros to View BoQ information |
