BARBED WIRE - Line Wire - Galvanized steel wire of 2.5 mm diameter.Point wire - Galvanized steel wire of 2.5 mm diameter.Barbs - Distance between two boards 75mm, the barbs shall have four points and shall be formed by twisting two point wires each two turns. tightly around both the line wires making altogether four complete turns.Standard- Conforming to IS-278-2009
2
PRE STRESSED RCC FENCING POLES with UnailsType- Straight Length - 2.00 mDimensions - Bottom 10x10 cm square, Cement Concrete Mix- Concrete Mix Shall be conforming to grade M-15 of IS:456:2000Reinforcement - There Shall be 4 Nos. of vertical reinforcement of high tesile steel wire of 4 mm dia. Holes Hooks - 6 nos, bottom hole should be provided 50 cm above the bottom of the poles, The central distance between the top and bottom holes shall be equally divided for remaining holes. J Hook shall be of 6mm dia MS Bar with proper threads at one end nut and washer for tightening purpose. These J bolts shall be pass through the holes of poles. Manufacturing- In order to ensure desired compressive strength, RCC fencing poles should be compacted with the help of platform vibrators. Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5 cm. Standard - Conforming to IS 4996:1984 with up to date amendments.Unails - MS Corrosion Resistant U shape Stainless Steel (with 07 Unails per pole)
3
Galvanized steel Chain Link Fence - Mesh Wire - Galvanized steel wire of 3.15 mm diameterFabric Size- 100x100 mmHeight-150 cmLine Wire-2 numbers of line wires of 4.00 mm diameterStandard- Conforming to IS-2721-2003, with up to date - amendments. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
