|
| 1 | Earth in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts, levelling ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. |
| 2 | Stone crusher dust finer than 3 mm with not more than 10% passing 0.075 sieve ………………do…….(Supplying, Laying and compacting) |
| 3 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume). |
| 4 | Providing clean coarse sand in filling foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm think with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per specification and direction of E/I. (Mode of measurement compacted volume) |
| 5 | Providing designation 75B one brick flat soiling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Providing centering and shuttering incliding struting,proping etc. and removal of form for foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 14 | Providing designation 75B brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 15 | Providing designation 75B brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 16 | Providing Tor steel reinforcement of 8mm dia rods as Per approved didesign and drawing excluding carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of roots, placing the rods in position as per approved disign and drawing all complete as per specification and direction of E/I. 8mm |
| 17 | 12mm and Above |
| 18 | Supplying, fitting and fixing M.S. grill with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. (where steel is not supplied by the deptt.)@ 30KG/M2 |
| 19 | Providing two coats of painting with ready mix paint over a coat of primer of approved shade and make over new steel surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l. |
| 20 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 21 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specificationand direction of E/l. |
| 22 | Supplying ,fiftting and good quality. Well dressed and well seasoned sal wood work in chaukhat in doors, windows skylights, fanlights and C/W clerestory windows openinig, including wedge over all clams complete including application of coats of wood presevative of approved quality on the surface butting walls and lintels all complete as per building specification anddirection of E/I |
| 23 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. |
| 24 | Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortar (1:1:1) (limeputty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 25 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 26 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s pecification and direction of Engineerin- Charge. metre |
| 27 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on |
| 28 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1000x1000 mm sqm |
| 29 | Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigmentsetc. complete.Size of Tile 1000x1000 mm sqm |
| 30 | Providing and laying 6mm Pre Cast white glazed wall tiles thickness to be specified by the manufacturer) in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 31 | Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Anodised aluminium(Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 32 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 33 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 34 | Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 35 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. 13.41.1 Two or more coats on new work |
| 36 | Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l. |
| 37 | Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete |
| 38 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 39 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 40 | Providing and fixing of sitting chair deluxe bench (1.3x0.90)m, it can comfortably occupy 3 adults at a time. |
| 41 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 42 | Wiring for light point/fan point exhuast fan point/call bell point with 1.5 sqmm FR PVR Insulated copper conductor single re cable in surface/recessed PVC conduit with piano type witch. Phenolic lamination sheet. Suitablesize PVC GI box etc as Req. |
| 43 | Wiring for loght/ power plug with 2x4 sqmm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4sqmm FRPVC insulated copper conductor single core for loop earthing etc as Req. |
| 44 | 2x1.5 sqmm+1x1.5 sqmm earth wire |
| 45 | 2x2.5 sqmm+1x1.5 sqmm earth wire |
| 46 | Supplying and fixing following piano type switch / socket on the existing switch box/cover including connections but excluding etc as required. Elelctronic step fan regular, deluxe |
| 47 | Supplying and fixing suitable size GI box with Phenotic Limination sheet and cover infront on surface or in recess including providing and fixing 5 pin, 5/6 amps modular type socket outlet and 5/6 amps modular type switch connection painting etc as Reg. |
| 48 | Supply and fixing 2 pin 5 amp. Ceiling rose on the existing junction box/wooen block including connection etc as required. |
| 49 | Supply and fixing batten / angle holder including connection etc as required |
| 50 | Supplying and Fixing 6 amps to 32 amps ratings 240 volts , 10 KA, \\"B\\" Curve, miniature Circuit Breaker Suitable for Inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.6/32A Single Pole ''B'' Series |
| 51 | S/F Modular blanking place- Supplying and fixing of the existing modular plate and switch box excluding modular plate etc. as required |
| 52 | Twin control point wiring in PVC conduit withmodulartype switch:-wiring for twin control light wih 1.5 sqmm FRPVCinclulated copper conductor singlr core cable in surface / recessed PVC condui ,2 way piano type switch, phenoliclamination sheet, suitablre size GI box etc req. |
| 53 | 15/16 watt led bulb |
| 54 | Supply, installation of, testing and missingoning of following size of ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5 sqmm FR PVC insulated copper wire suitable for 230V 50Hz,single phase supply etc complete as requrired |
| 55 | S/F Piano type Switch / Socket: Supplying and fixing following modular type switch / socket on the existing switch box/cover including connections but excluding piano plate etc as required5/6 amps one way switch |
| 56 | 5/6 amps 3 pin socket out let |
| 57 | S/F TP MCB DB: Supplying and fixing following way, threepole and neutral sheet MCB distribution board, 415 volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate,interconnections, phosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ISOLATOR). |
| 58 | MAIN PANEL |
| 59 | Copper earth plate:- Earthing with copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclousre with cover plate having locking arrangement and watering pipe tec. (but without charcol or coke and salt) cpmlete as reqired. |
| 60 | P/F Copper Lighting conductor final:- providing and fixing of Lighting conductor final, made of 25mm dia 3mm thick copper base plate including holes etc. complete as required |
| 61 | Suplying fitting and fixing 40mm high viterous white glazed earthen E.W.C with \\"P\\" trap of parry hindustan or any other approved I.S.S meke including supplying and fixing 15 liters C.I mousqito proof low down flushing cistern of approved make with complete fitting with C.I handle and R.S or braked with telescopic flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15 mm PVC alakthene pipe 45cm, long with brass coupling at both end and white/black plastic solid state seal abd lead of commander/ cuckoo or other I.S.S make with hinges or screws etc. painting pipe and cistern etc. with 2 coats approved paint over a coat red oxide priming all complete as per specification and direction of E/I.Witl, \\"P\\" trap-12.5 Liters low level P.V.C cistern |
| 62 | Provinding an fixing Chorinated Poluviny Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all PVCV plain & brass threaded fitting, including fixing the pipe with clamps at 1.00 m spacing, This includes jointing of pipes & fittings with one step CPCV solved cement and testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia pipes |
| 63 | 25 mm nominal outer dia pipes |
| 64 | Providing and fixing G.M non- return valve Harizontal /vertical type of approved quality as per specification and deirection of Engineer in Charge |
| 65 | providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, ISI: 12701 marked, with cover and suitable locking arrengment and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank. |
| 66 | G.I Nipple 20 mm |
| 67 | Elbow 20 mm dia |
| 68 | 15 mm Dia Pillar Cock |
| 69 | Urinal (450mm x 350mm) |
| 70 | U- PVC Pipes (Working Pressure 4kg/cm2) Single Socket Pipe 75mm |
| 71 | U- PVC Pipes (Working Pressure 4kg/cm2) Rubber( seal )ring 75mm |
| 72 | U- PVC bend 87.5 75mm |
| 73 | SSF vitreous white glazed Wash hand wasin -do- -do- all complete job as per specification and direction of E/I. |
| 74 | Carriage Of Material (A) Sand (Lead 1km K + 9km P) |
| 75 | (B) Stone Chips(Lead 1KM K+24KM P) |
| 76 | (C) Bricks (Lead 8KMP+2KM K) |
| 77 | Disposal of excaveted earth (4kmP+1 Km K) |
| 78 | S/F/F Sign.Board |
| 79 | Goods & Service Tax (G.S.T.) - |
| 80 | Labour Cess - Please Enable Macros to View BoQ information |
