|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 2 | S&F for Roof trusses (Framed), trussed, purlins, crane gantries, posts, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. complete all spd and directed. |
| 3 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 4 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete or masonary |
| 5 | S&F for MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 6 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil. |
| 7 | M&L PCC 1:3:6 Type C2 40 mm graded stone aggregate in foundation, filling and mass concrete as in boundary pillars and post etc all as specified and directed. |
| 8 | MS Flats for supports or stays for chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 |
| 9 | Supply only Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire. |
| 10 | Fixing only new chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 11 | S&F Mild steel round bars 10mm dia and over as in strengthening bars for bending cranking spirallt for hooking for chain link, hooking end and welding with flats of chain link fencing Fe 410W (Gde E-250 ) quality -A or FE-290 (Gde E-165)complete all as specified . |
| 12 | M&L for preparation of new iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 13 | M&L for preparation of new iron surfaces of any description nexc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 14 | S&F, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and directed |
| 15 | Demolition of brick work , or any type built in Cement mortar including all quoins, arches, pillars etc |
| 16 | M&L brickwork with flyash old size bricks built in CM 1:6 straight or curved on plan exe 6 m mean radious complete allas specified and directed. |
| 17 | Dismantling Plain or corrugated steel/ transluscent sheeting, any gauge, thickness, including Nainital or Similar pattern roof coverings etc complete |
| 18 | M&L for 2mm thick Fibre glass reinforced translucent corrugated sheeting (approved color and pattern ) with two corrugations side lap fixed in roof/ wall/gates as straight or curved etc incl L or J-type hook instead of screw complete all as specified and directed |
| 19 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer complete all as specified and directed |
| 20 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed. |
| 21 | M&L Cement concrete type C2, 1:3:6 (40mm graded aggregates) in mass concrete or in smilar work complete all as spd and directed. |
| 22 | M & L cement concrete 1:2:4 (using 12.50 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope complete all as specified. |
| 23 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves, including making drainage opening wherever required complete all as specified and directed. |
| 24 | M&L for two coat of painting oil emulsion over wall/curb stone etc or where required complete all as spd and directed |
| 25 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed . |
| 26 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 27 | S&F for 16 to 18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment. |
| 28 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 29 | Dismantling or removal of settled Bricks/ Interlocking block any thickness (laid flat or on edge) or brick tiles in path, floors, channels, kerbs, aprons, etc. (each layer) laid dry and pointed complete all as specified and directed |
| 30 | M&L for Cement concrete 100 mm thick type D- 2, 1:4:8 (40mm graded aggregate) as in sub base etc complete all all as specified and directed |
| 31 | Fixing only of Brick/ Interlocking blocks any thickness as in pathway or hardstanding (except tiles) over sand cushioing etc complete all as specified and directed |
| 32 | S&F machine pressed precast concrete interlocking paver block any shape size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed |
| 33 | S&F machine pressed precast concrete interlocking paver block any shape size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and no pigment complete all as specified and directed |
| 34 | M&L for sand filling under floors of interlocking tiles as specified and directed. |
| 35 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed of CM 1:4 all as specified and directed |
| 36 | Demolition of brick or stone masonary work built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles and removing outside MD land complete all as specified and directed. |
| 37 | M&L brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed. |
| 38 | M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 all as specified and directed. |
| 39 | Demolition of plain/Reinforced cement concrete of any description and in any position not otherwise specifically provided for all as directed by Engineer-in-charge |
| 40 | M&L precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab set in CM 1:6 all as specified ( Reinforcement steel will be measured and paid separately under relevant item. |
| 41 | M&L TMT reinforcement bars 10mm and over using cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete. |
| 42 | M&L TMT reinforcement bars 6 to 8 mm dia using cut to length bent to shape as required including cranking bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete. |
| 43 | S&F in repair 75/110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches, floors or fixed to walls incl fittings like bend, elbow etc complete all as directed. |
| 44 | Formwork to sides of concrete foundations, footings, bases of columns, drain walls, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, fair finished surfaces flat or curved etc complete all as spd and directed. |
| 45 | M&L for Hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete |
| 46 | M&L for cement concrete type B0 1:2:4, 20mm graded aggregates, in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles, drains base and walls etc and mass concrete complete |
| 47 | Taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified and directed. |
| 48 | Rendering 15mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 using WPC finished even and smooth without using extra cement complete all as specified. Note: WPC shall be measured and paid separately under relevant item. |
| 49 | M&L for applying and finishing walls with two coats of weather coat/ exterior paint of required shade over and including priming coat of exterior primer applied as per manufacturer instruction all as specified and directed |
| 50 | Supply only integral water proofing compound of approved make complete all as specified and as directed |
| 51 | Cleaning and removing all scale and dirt, etc, from tanks 500 to 1000 ltrs capacity and from mouths of circulating pipes, etc. complete all as spd and directed. |
| 52 | S & F Toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes etc incl two SS steel handle per shutter and aluminium bottom and top rail, size etc as approved complete all as spd and directed by Engr-in-Charge. |
| 53 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as spd and directed |
| 54 | S&F in rpr Solid PVC Wall panelling/Lining consisting of 4-5mm thick PVC sheet as approved, inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as spd and directed. |
| 55 | M&L for Rustic 3mm thk approx interior or exterior both side water proof matt or approved finish as per approved color and applied as per manufacturer specification incl preparation of existing surfaces any type/surface complete incl two coat of painting OBD/weather coat complete etc arrangement complete all as spd and directed. Please Enable Macros to View BoQ information |
