|
| 1 | Almirah large steel with shelvesDrg No : FD - 1031Dimension : Overall size of almirah large steel is 1985mm high, 920mm wide and 485mm deep. Description : The MS sheet/CRCA Sheet used Top, sides back, bottom and front of almirah shall be 1mm thick mild steel/CRCA sheet Make of Steel is TATA/ JINDAL/SAIL/IISCO. Four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments as shown in drg.The lock of the almirah shall be provided with safety handle and lock. A three way locking device shall be provided to front shuter. A steel CP handle 100mm long shall be provided to shutter and Lock shall be provided of Make: Godrej/ Harrison/Mortice/Link/Plaza. . The front two doors of the almirah shall be hammer tonded as directed by Engg-in-Charge/GE; shall be fixed with 75mm long hinges; three on each side with proper rivet and welding. The shelves shall be welded to sides and back of almirah internally as shown on drg. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire Almirah shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE. |
| 2 | Almirah Medium/ Small SteelDrg No : FD - 1032Dimension : Overall size shall be 1270 mm High, 760 mm wide and 440 mm deep.Description: -(a) It shall be made of 1mm thick mild steel sheet/CRCA sheet. All joints shall be rivted and welded thoroughly.(b) The Almirah shall have three shelves.(c) The Almirah shall have one spring action recessed handle 150 mm long with bulit in locking arrangement fitted to cut out space in one shutter with proper workmanship/normal handle 120/125 mm with three way locking system. Lock shall be provided of Make : Godrej/ Harrison/ Mortice.Rest all specifications and dimensions are as per drg.Finish: - All metal /iron work shall be treated with dry powder coated in double shade after preparation surface.The entire almirah shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE. |
| 3 | Almirah Large Steel 1/2H x 1/2SDrg No : FD/E6/MAP/18Dimension : Overall size shall be 1900mm high, 910mm wide and 490mm deep. Description: The CRAC sheet used for making sides, front, drawers, partitions, base and shelves of the almirah shall be of 1mm thick. The almirah is divided equally to have three compartments in such a way two bottom shelves and top half compartment shall be used with locker and other half containing compartment shall be used with drawer portion include. Two shelves in bottom portion shall be fixed at an equidistant positions as shown in drg. The locker of the almirah shall be provided with safety handle and lock. The front two doors of the almirah shall be fixed with 75mm long hinges three on each side with proper rivet and welding. The shelves shall be welded to sides and back of almirah internally as shown on drg. Base of Almirah shall be made 1mm thick CRAC sheet. One chromium plated rod of 20mm dia shall be fixed at 75mm below the top for hanging purpose. All joints and welding and fixing shall be done in accordance with the standard workmanship. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. The entire Almirah shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg.Rest all as per drg and directed by Engg-in-Charge/GE. |
| 4 | Bed HardDrg No : FD /E6/MAP/08Dimension: Overall size shall be 2050mm long, 900mm wide and 500mm high (footboard side) and 800mm high (head board side).Description: All Steel shall be of rectangular CRAC pipe of 18 Gauge.The head board shall be 800mm high and Foot board shall be 500mm high.The frame of head board and foot board shall be of 38mmx38mm rectangular CRAC pipe.18mmx18mm rectangular CR pipe shall be provided in the inner of head board frame/foot board frame as shown in drg. 18 mm thick marine ply of Make: Century Ply/ Archid Ply/ Green ply covered with both side laminate sheet of approved shade of make: century ply/ KitPly/ Archid ply shall be screwed to MS strip arc welded to 18mm thick rectangular CR pipe with standard workmanship both in head board/foot board..25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level.The top of bed hard shall be of 12mm thick BWR ply of Make: Century Ply/ Archid Ply/ Green ply approved as per IS specified guideline fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed.Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). |
| 5 | Locker Bed Side SteelDrg No : FD-1029Dimension : - Overall size shall be 760mm long, 600mm wide and 1100 mm hingh.Description : - All mild steel sheet shall be 1mm thick. Two legs shall be provided to lockers as shown on drawing and shall be of 1mm thick mild steel sheet top, sides back, front and shelves shal be of mild steel sheet of 1mm thick (Make of pipe TATA/ JINDAL/SAIL/IISCO). Two handles, chromium plated, 100mm long fixed to shutters. One hasp and staple 75mm long (Sample as apprvoed by GE) shall be fixed to shutters. The shuttters shall have the locking device also, All steel ironf surfaces exposed to view shall given two coats of enamel paint over a coat of primer paint.Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). The entire locker shall be dual in Colour/ Shade as directed by Engg-in -Charge irrespective of what is shown on drg. All as per drg and directed by Engg-in-Charge/GE. |
| 6 | Table dining OrsDrg No : FD-165MDimension : Overall size shall be 1900mm x 685mm x 760mm. Steel frame shall be of 1600mm x 515mm x 742mm. Four legs shall be of 25mm square mild steel tube of wall thickness 1.60mm. Two short stifferners joining legs in short sides at 150mm from bottom shall be provided in the middle of short stiffener joining short stiffeners with 25mm square mild steel tube of wall thickness 1.60mm at 150mm from bottom of legs. Top of table shall be of 19mm thick pre-laminated MDF board with teak wood edging al-round the top of table and coverd with 22 Gauge Aluminium sheet on Top. The edges of the top fixed with headless nails and adhesive, irrespective of what is shown and specified in drawing. PVC/ hard rubber toes shall be provided to the bottom of legs. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation of surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). |
| 7 | Table office clerk steelDrg No : FD 1004Dimension :Overall size shall be 1200mm long, 610mm wide and 760mm high.Description :Steel frame shall be of size 1160x570x742mm .four legs of 25mm mild steel tube of 1.6mm wall thickness shall be provided. Top oflegs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm in long and short sides. Two short stiffeners of same sizeshall be provided at 130mm from bottom of legs. One long stiffener shall also be provided to the middle of short stiffeners. Three drawers of equalsize shall be provided on the right hand side above the stiffener at 130mm high with overall size of 350mm wide and 430mm high and 410mmdeep..The top of table shall be provided with pre-laminated MDF board of 18/19mm exterior grade and 4mm thick teak wood edgingalround the table .Hard rubber/PVC toes shall be provided to the legs.Locking device shall be provided to drawers.Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). |
| 8 | Table 3 x 2 W/o drawer steelDrg No : FD 1007Overall size shall be 900mm x 600mm x 760mm. Steel frame shall be of 800mm x 500mm x 742mm. Four legs shall be of 25mm square mild steel tube of wall thickness 1.60mm. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.60mm top rails on long and short sides. Two short stifferners joining legs in short sides at 100mm from bottom shall be provided in the middle of short stiffener joining short stiffeners with 25mm square mild steel tube of wall thickness 1.60mm at 100mm from bottom of legs. Top of table shall be of 18mm thick pre-laminated MDF board with teak wood edging al-round the top of table. The edges of the top fixed with headless nails and adhesive, irrespective of what is shown and specified in drawing. PVC/ hard rubber toes shall be provided to the bottom of legs. Rest all as per drg. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation of surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). |
| 9 | Table Bed SideDrg No : FD /E6/MAP/15 ® DESCRIPTION: The overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg. The entire frame of table bed side shall be made up of 18mm MS square pipe (18 Gauge) duly black powder coated. Front, two sides and top shall be made up of 18mm thick marine ply of Make : Century/ Green Ply/ Archid Ply with both side laminated sheet of Make : Century/ Green Ply/ Archid Plyof approved shade as directed by Engg-in-Charge/GE. The Back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood of Make: Archid Ply/ Green Ply/Century Ply duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick commercial plywood of Make: Archid Ply/ Green Ply/ Cenury Ply irrespective of what is shown on drg. The drawers shall be made functional on telescopic Channel of Make: Hettich/Kaff/Godrej fixed inside the drawer .The drawers of the tables shall be provided with decorative brass steel handles as per sample approved by GE .Rest all as per drg. Finish: All metal /iron work shall be treated with dry powder coated paint in double shade after preparation surface. Make of Paint : ASIAN (Apcolite)/ Berger PAINTS (Luxol)/ SHALIMAR PAINTS (Superlac/ NEROLAC PAINTS (Nerolac). Please Enable Macros to View BoQ information |
