|
| 1 | Laying only machine pressed precast concrete interlocking paver block any size,shape thickness complete all as specified and directed. |
| 2 | M & L 75mm thick cement concrete type C-2, PCC (1:3:6) (40mm graded stone aggregate) as in path/hardstanding complete all as specified and directed. |
| 3 | M & L machine pressed precast concrete interlocking paver block coloured rubber moulded any shape any size with grey cement and no pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness M-40 Grade complete all as specified and directed. |
| 4 | Sand filling under floors for cushioning of including tiles complete all as specified and directed. |
| 5 | M & L of cement concrete Type B-1 (1:2:4) (using 20 mm graded stone aggregate as in coping, kerbs and like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and directed. |
| 6 | Excavation in trenches not exceeding 1.5m wide and n. exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exceeding 10 sqm on plan and n. exc. 1.5m in depth in hard/dence of soil etc complete all as specified and directed |
| 7 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 8 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 9 | Removal of excavated materials to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed |
| 10 | M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete as in manhole/septic tank and other similar works complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick external surfaces on brick/concrete in CM (1:4) finished even and smooth without using extra cement with WPC 2% by wt of cement.( Note:-WPC measured and paid separatly) complete all as specified and directed. |
| 12 | M&L for 2 coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces complete |
| 13 | M&L 300 mm dia RCC Hume pipe CL NP-3 laid and jointed complete with collars complete including packing and hounching with PCC (1:3:6) complete all as specified and directed. |
| 14 | M&L for one coat of glazed lacquer resin and hardener paint (polyurethane)including prepration of old painted surfaces on brick, stone concrete, asbestos cement or plaster surface of any discription over10cm girth not otherwise described. complete all as specified and directed. |
| 15 | Supply and fixing street light sintex box of size 300 mm x 200 mm x 105 mm, made out of FRP sheet with weather proof hinged door including self locking arrangement, out door type weather and vermin proof complete comprising of insulated / high quality PVC sleeves aluminium bus bar of capacity 63 Amps 04 Nos (three phase RBY and black for neutral) with and including 6 Apms MCB single pole, single phase 230 volts, including 25 x 3 mm flat iron mounted on insulators, having arrangement of connecting incoming and outgoing cables complete and all as specified and directed. NOTE:- PVC for protection of cable FROM GROUND TO JB included in quoted price. |
| 16 | Supply and fixing 50 Watt Decorative Black Iron Post Top Lighting Pole with LED Light (Single Head, 240V) outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection of pole height 10 feet fancy type black coated decorative type complete with foundation fitting on struts/making good with pcc, connection to light for fully functional All as specified and as directed. |
| 17 | Supply and fixing Floating TYPE Fountain - 4.5 Feet Diameter, 35 Feet Water Height | Metal made, RGB Color, Superior Quality, Less Maintenance, with Submersible Stainless Pump 440 v, complete with control panel should be on ground mounted and floating bags assembly. Note:- (1)price include all auxillaries and cables required for complete testing and fully funtional of system. |
| 18 | Supply and fixing Self-priming Pump, MINI-30C, 0.5 HP, Single Phase, 220 Volts, Size 25mm X 25mm of copper winding complete with connection and joins in pipe and testing of it including all auxillaries required for fully functional of same. complete all as specified and directed. |
| 19 | Supply and fixing outdoor type RGB focus Light with Remote Control,UV 6in1 Color Uplightning Led Lights, with ip66 protection Events-36 Led, complete with all auxillaries required for fully functional of it including its conection and supply fixing on statnd for testing including all auxillaried for fully functional of same. complete all as specified and directed. |
| 20 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for laying of pipe, cable, foundation of electric pole etc and getting out in soft/loose soil, complete all as specified and directed. |
| 21 | Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed. |
| 22 | Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 23 | Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed |
| 24 | Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed. Brick size-0.23x0.15x0.7 complete all as specified and directed. |
| 25 | Supply,laying,galvanised steel tubing light grade complete with all fitting of size 40 mm dia for cable protection along with pole across road etc. Complete all as specified and directed |
| 26 | Supply,laying, commissioning and testing or passing through pipe, XLPE insulated, armoured, electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade in duct / trenches for small length for extension/replacement of the defective cable of nominal cross sectional area 6 sqmm 4.0 core including brass compression cable gland, terminal aluminium lugs etc making connection and testing complete all as specified and directed. Note :-(i) Pipes and bricks for protection, mild steel clamp nut and bolts sand cushioning shall be measured and paid separately. |
| 27 | M &l for PCC (1:4:8) TYPE D-2 using 40 mm graded broken stone aggregate as in mass concrete in foundations etc . complete all as specified and directed. |
| 28 | Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for coping around the pole strut above ground level and filling in depth of poles. including neccassory form work and finishing the surface fair and even without using extra cement all as directed and specified. |
| 29 | Excavating over areas, n exec 1.5 m deep & getting out in hard/dense soil complete all as specified and directed. |
| 30 | Excavating over areas, n exec 3.0 m deep & getting out in hard/dense soil complete all as specified and directed. |
| 31 | M & L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed. |
| 32 | M & L for Brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed. |
| 33 | M & L RCC M-25 design mix using 20 mm graded aggregate in beams, cantilevers, lintels over 1.5 m span |
| 34 | M & L RCC M-25 design mix using 20 mm graded aggregate in Foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete |
| 35 | M & L RCC M-25 design mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts |
| 36 | M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 37 | M & L for 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate |
| 38 | Supply only Integral water proofing compound |
| 39 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat |
| 40 | Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation & plinth beams and similar work Rough finished surfaces of concrete flat |
| 41 | Form work to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed |
| 42 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed |
| 43 | M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed |
| 44 | -ditto- all as per Item No 43 Above but 6 to 10 mm dia as in Stirups |
| 45 | -ditto- all as per Item No 43 Above but 6 to 8 mm dia as in stirrups, spacers and binder |
| 46 | M&L Rendering 15mm thick in two coat on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) and applying WPC on second coat @ 3% by wight of cement or manufacturere instruction complete all as specified and directed |
| 47 | M&L Rendering 15mm thick on stone masonry surfaces or surface fair face of brickwork in CM (1:6) finished even & smooth (without using extra cement) complete all as specified and directed |
| 48 | M & L for Hard core of Broken bricks gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed |
| 49 | M & L 100mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub floors, sub-bases finished even and smooth without using extra cement. complete all as specified and directed |
| 50 | M & L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate as in sub floors, sub-bases finished even and smooth without using extra cement. |
| 51 | M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc 0.11 Sqm but n.exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) complete complete all as specified and directed |
| 52 | S & F Coloured Glazed earthenware tiles 300 x 600 x 7-8mm thick, on walls etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick plaster in CM (1:3) on fair face of brick or concrete surface complete all as specified and directed |
| 53 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling |
| 54 | Applying three coats of white wash on new Ceiling surface including preparation of surface. |
| 55 | M & L 75mm thick PCC type C-1, (1:3:6) using 40mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection/Path |
| 56 | S & F of 15 mm dia Fancy type chromium plated Stop valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 57 | S & F PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed. |
| 58 | S & F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed. |
| 59 | S&F Vitreous china squatting pan 'Orissa' pattern size 580 x 440 mm white with integral foot rests including connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc, complete all as specified and as directed. |
| 60 | S&F vitreous china wash basin, white, flat back size 580x450mm excluiding taps, chain and plug including waste pipe, brackets, 32 mm dia CP coupling cutting for and pinning in ends for brackets or ercting stand complete all as specified and directed. |
| 61 | S&F 15mm bore long body bib tab, cast copper alloy, CP fancy type, with crutch or butter fly handle, screw down, screwed for iron pipe or for brass ferrule including flange complete all as specified and directed. |
| 62 | S/F pillar taps, cost copper alloy, with capstan heads, CP fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts and screwed for iron pipe and fixed to 15mm bore complete all as specified and directed. |
| 63 | S&F tubes medium grade of 15mm bore dia galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed |
| 64 | S&F tubes medium grade of 20 mm bore dia galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed |
| 65 | S&F tubes medium grade of 25 mm bore dia galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed |
| 66 | M&L for 1000 ltr capacity rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including all accessories specified and directed. |
| 67 | S&F in 20mm gun metal , globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed complete all as specified and directed. |
| 68 | S&F in 25mm gun metal , globe or gate valves with iron wheel head screwed both ends for iron pipe & fixed complete all as specified and directed. |
| 69 | S&F 25mm ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 70 | S&F Stack clamps out of 50mm by 5mm flat &16mmdia round iron stays including bolts &nuts &securing end of stays to wall or roof bore of pipe 100 mm complete all as specified and directed. |
| 71 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore complete all as specified and directed. |
| 72 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall of 110 mm bore dia. |
| 73 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 75 mm bore dia. |
| 74 | S&F PVC (SWR) branch piece, single (singleY) equal or unqual of 110 mm bore dia. |
| 75 | S&F PVC (SWR) vent cowl of 110 mm bore dia. |
| 76 | S&F PVC (SWR) vent cowl of 75 mm bore dia. |
| 77 | S & F 110mm pvc (SWR) bends any radius provided with access door all as specified and directed |
| 78 | S & F 75mm pvc (SWR) bends any radius provided with access door all as specified and directed. |
| 79 | S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement |
| 80 | S/F PVC connections 15mm size with brass chek nuts of length 450mm complete all as specified and as directed. |
| 81 | Solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colur PVC sheet reinforced with ms squre tube, supplying &fixing in opening as complete all as specified and directed. |
| 82 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rail. MS frame shall be covered with heat moulded PVC”C” channel having a PVC steel strip of 20mm width stuck inside with solvent cement for style and plain coloured PVC sheet for top rail lock rail &bottom rail on either side &as gap insert for top rail and bottom rail paneling of plain coloured PVC sheet to be fitted in MS frame welded / sealed to style &rails with suitable PVC sheet beading. And jointed together with solvent cement, supplying and fixing in the frames at site as per specification &drawing |
| 83 | S & F Aluminium handle cast type anodized 150mm size |
| 84 | S & F Aluminium, anodized, barrel tower bolts of extruded section 200mm long |
| 85 | S&F Butt Hinge extruded aluminum alloy with galvanized MS Hinge Pin anodised and fixed 125mm long, type B-21 complete. |
| 86 | S & F Aluminum alloy, anodized, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy size 300mm long. |
| 87 | M&L Ultra plus PE, DWCPE pipes confirming IS-16098 part 2: 2013 pertaining structured wall plastics pining system for Non-pressure drainage and sewage 180 mm (OD) bore pipe and fittings with non smooth srface, type B complete all as specified and directed. |
| 88 | M&L for Precast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work incl necessary form work and set in CM (1:4) complete |
| 89 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 90 | (a) One light point controlled by one, one way switch 5 Amps |
| 91 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps. |
| 92 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 93 | Description all as per item No 5 here in before but using 4 sq mm single core copper conductor cable of multistranded FRLSH insulated unsheathed 1100 volts grade for 5/15 amps point controlled with modular motor starter for air conditioner including necessary running of 4 sq mm copper FRLSH wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 94 | S & F modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 95 | S & F modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed. |
| 96 | S & F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 97 | S & F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 98 | Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings |
| 99 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. |
| 100 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 101 | S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to mtch with existing colour of wall complete all as specified and as directed. |
| 102 | Supply and fixing SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 103 | S & F for MCB Single pole rated capacity 20 AMP, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 104 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m |
| 105 | S & F LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 106 | S & F LED lights fitting 1x 10 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 107 | M & L for earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-1 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and connected to earthing point complete all as specified and as directed. |
| 108 | M&L for laying, comnecting and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 1100 volts Earthed, grade cross sectional area 70 sq. mm. of 3.5 core all as specified and directed |
| 109 | Supply,laying galvanised steel tubing light grade complete with all fitting of size 50 mm dia for cable protection along with pole across road etc. Complete all as specified and directed. |
| 110 | Supply and fixing LED street light fitting of 35 Watt 230 V AC outdoor type as building security light with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with bracket mounted on roof of bulding all as specified and directed. |
| 111 | S & F Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 112 | S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimumweight 60gms) complete. |
| 113 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, drains and channels etc including necessary form work complete all as specified and directed |
| 114 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. |
| 115 | S & F for sheet metal enclosure MCB DB SPN 2 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of disturbed surface to mtch with existing colour of wall complete all as specified and as directed. |
| 116 | S & F LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 117 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete witrh all connection and testing. |
| 118 | M&L for provision of transformer plinth 2.5x2.5 x1.5 mtr complete with chain link fencing pcc foundation rcc slab and grevel all around filling as show TD-251 Sheet transformer etc, complete all as specified and directed |
| 119 | Taking down existing old unserviceable underground LT cable upto size 16sqmm to 400 Sqmm, 3.5 / 2 core keeping aside for reuse/removal from trenches/wall/pole complete all as specified and directed |
| 120 | Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area 16 Sqmm 4 core complete all as specified and directed. |
| 121 | All as per item No. 120 here-in-before but for cross sectional area 25 Sqmm 3.5 core complete all as specified and directed. |
| 122 | All as per item No. 120 here-in-before but for cross sectional area 50 Sqmm 3.5 core complete all as specified and directed. |
| 123 | All as per item No. 120 here-in-before but for cross sectional area 70 Sqmm 3.5 core complete all as specified and directed. |
| 124 | All as per item No. 120 here-in-before but for cross sectional area 95 Sqmm 3.5 core complete all as specified and directed. |
| 125 | All as per item No.120 here-in-before but for cross sectional area 120 Sqmm 3.5 core complete all as specified and directed. |
| 126 | All as per item No. 120 here-in-before but for cross-sectional area 400 Sqmm 3.5 core complete all as specified and directed. |
| 127 | Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable, heavy duty, with aluminium conductor 11000 volts grade (earthed) cross sectional area 95 Sqmm 3 Core complete all as specified and directed. |
| 128 | M&L for 100mm dia GI tubes light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, complete all as specified and directed including clamps, nut bolts and washers incl taking down old pipe completed all as specified and directed. |
| 129 | M & L Galvanised iron steel tubes, ISI marked light grade of size 50mm bore for cable protection along the poles under road /drains complete all as directed. |
| 130 | Supply and erecting GI Octogonal type pole size top dia 70 mm bottom dia 135mm thicness 3mm base plate 220x220mm base platethicness 12 mm foundation bolt m16x650x4 mm (7mtr long) including foundation nut bolt as per manufacture recommedation and GI Bracket single arm for fixing of street light complete all as specified and directed. |
| 131 | Supply & fixing in replacement of 3 Phase Nature switch Panel 12-15KW, 32Amps / Phase (SMART TIMER SWITCH) fixing for street light switch of wall/pole mountable SMC enclosure conforming to IP 54 consisting of Nature switch smart SPD.Isolater,MCB drive for loading , and terminal blocks the enclosure comes complete with mounting brackets, MS flat clamps, nuts, bolts and washers complete all as specified and directed |
| 132 | Boring holes horizontally under Road without damaging the surface of road by mechnically/manually means with GI pipes (bore for passing of UG cable all as specified and as directed (GI pipe laid shall be measured seperately). |
| 133 | Burnt bricks sub class 'B' laid flat dry across the cable for cable protection all as specified and directed. |
| 134 | Taking down/Shifting carefully transformer any capacity, any make, any type from 4 pole / 2pole/plinth by dismantaling, dis-connecting HT & LT sides, earthings of transformer, supporting angles/crossarms, Shifting / transporting transformer carefully from the site to the other Location/workshop and refixing at site and mounting on ht pole with all electrical connection to the entire satisfaction complete all as specified and directed. |
| 135 | 30. M&L for cross arms, bracing supports, clamps back plates angles fabricated from the structural steel section including bolts, nuts, washers, welding, bending, drilling holes for bolts, bent to any required shape of size as indicated or directed, inclusive of one primer coat and two coats of aluminium paint after preparation of surfaces complete all as specified and directed. |
| 136 | Taking down old UNSV ACSR conductor, any type and size from the poles and supply and fixing new ACSR conductor including stringing on LT poles complete including aluminium binding wires, jumpering, bindings at insulators etc, complete, all as specified and directed. |
| 137 | Dismantling of unserviceable/serviceable steel tubular poles any size and removal from site complete all as specified and directed. |
| 138 | Supplying, transporting and erecting in position steel tubular swaged poles 410-SP-55 type, 11.00 metre long complete with mild steel base plate, CI finial taper, bolts, nuts and washers etc including necessary excavation and earth work, PCC (1:4:8) type D2 in foundation below pole, PCC 1:3:6 type C2 around poles and PCC (1:3:6) type C1 as in plinth block, disposal of surplus soil to distance not exceeding 50m and depositing where directed, painting steel tubular poles exposed surfaces with aluminium paint two coats over one coat of red oxide primer and providing painting of 30 cm wide red and white strips upto 1.5 mtr from bottom of the errected pole, painting embedded portion of poles with one coat of bituminious paint including marking of pole number etc complete all as directed. |
| 139 | Supply and fixing in repairs drop out expulsion type fuse with fuse barrels out door HT 11KV tripple pole mounted on HT 11 KV insulators & MS frame incldg two coats of aluminium paint over a coat of red oxide primer on MS work complete all as specified and directed |
| 140 | Switch Air brake, gang operated, triple pole, mechanically operated mounted on HT insulators (09 insulators pin type ) and MS galvanised steel frame with operating mechanism operated from ground level with fixed contacts of phosphorous bronze and moving contacts of copper including operating rod for current rating upto 200 Amps, 11000 volts complete with locking arrangement, including 3 Nos drop out explusion type of fuses with fuse barrals of required capacity to suit load at site, also including provision of two coats of aluminium paint over a coat of red oxide primer on MS work complete all as specified and as directed. |
| 141 | S&F in repair cable joint kit for 11 KV grade cable for outdoor termination Heat shrinkable END JOINTtype joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium cable of size 95 sqmm complete all as specified and directed |
| 142 | Taking down old unsv LT panel board including disconnecting all electric connection and accessories,Supply, installing, testing and commissioning of CPRI approved LT distribution panel floor mounted outdoor type, weather / vermin proof, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on 75x75x6mm (ISA7575) iron angles frame of height 45 cm from PCC bedding, factory assembled compartmentalized construction, free standing type, 3 phase and neutral 1000 amps current carrying capacity copper bus bar with epoxy insulated coating with colour code and insulated support, cable galleries inter connectiong bus bar connection / linkage complete and conforming to IS 8623 and IP 54 class of protection as per IS 2147 complete of suitable size to accomodate the items given below, including making connection of cables of incoming and outgoing with thimble / lugs, including the accessories as below complete and mounting the panel board on gound / floor with PCC (1:3:6) beddding upto a height of 30cm above ground level complete all as specified and directed as :- (a) Incoming : (i) ACB 4 pole 630 Amps at 415 v - 1 No 400Amps On load Chage over swith -1Nos (b)Out going : (i) MCCB 4 pole 400 Amps 36 KA at 415 v - 1 No (ii) MCCB 3 pole 200 Amps 36 KA at 415 v - 3 No (c) Copper bus bar 1000 amps for 3 phase & neutral - 1 set. (d) Digital voltmeter with selector switch 0 to 500 Volts - -01 No. (e) Digital Ammeter with selector switch and CTs 0 to 500 Amps -01 No. (f) LED type indicator lamps (R |
| 143 | Taking down old unsv LT panel board including disconnecting all electric connection and accessories,Supply, installing, testing and commissioning of CPRI approved LT distribution panel floor mounted outdoor type, weather / vermin proof, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on 75x75x6mm (ISA7575) iron angles frame of height 45 cm from PCC bedding, factory assembled compartmentalized construction, free standing type, 3 phase and neutral 600 amps current carrying capacity copper bus bar with epoxy insulated coating with colour code and insulated support, cable galleries inter connectiong bus bar connection / linkage complete and conforming to IS 8623 and IP 54 class of protection as per IS 2147 complete of suitable size to accomodate the items given below, including making connection of cables of incoming and outgoing with thimble / lugs, including the accessories as below complete and mounting the panel board on gound / floor with PCC (1:3:6) beddding upto a height of 30cm above ground level complete all as specified and directed as :- (a) Incoming : (i) MCCB 4 pole 400 Amps 36 KA at 415 v - 1 No (b)Out going : (i) MCCB 4 pole 200 Amps 36 KA at 415 v - 1 No (ii) MCCB 3 pole 160 Amps 25 KA at 415 v - 2 No (c) Copper bus bar 600 amps for 3 phase & neutral - 1 set. (d) Digital voltmeter with selector switch 0 to 500 Volts - -01 No. (e) Digital Ammeter with selector switch and CTs 0 to 500 Amps -01 No. (f) LED type indicator lamps (R |
| 144 | Taking down old unsv LT panel board including disconnecting all electric connection and accessories,Supply, installing, testing and commissioning of CPRI approved LT distribution panel floor mounted outdoor type, weather / vermin proof, made out of 3.15mm thick CRCA sheet duly powder coated, mounted on 75x75x6mm (ISA7575) iron angles frame of height 45 cm from PCC bedding, factory assembled compartmentalized construction, free standing type, 3 phase and neutral 400 amps current carrying capacity copper bus bar with epoxy insulated coating with colour code and insulated support, cable galleries inter connectiong bus bar connection / linkage complete and conforming to IS 8623 and IP 54 class of protection as per IS 2147 complete of suitable size to accomodate the items given below, including making connection of cables of incoming and outgoing with thimble / lugs, including the accessories as below complete and mounting the panel board on gound / floor with PCC (1:3:6) beddding upto a height of 30cm above ground level complete all as specified and directed as :- (a) Incoming : (i) MCCB 4 pole 200 Amps 36 KA at 415 v - 1 No (b)Out going : (i) MCCB 4 pole 160 Amps 36 KA at 415 v - 1 No (ii) MCCB 3 pole 100 Amps 25 KA at 415 v - 2 No (c) Copper bus bar 400 amps for 3 phase & neutral - 1 set. (d) Digital voltmeter with selector switch 0 to 500 Volts - -01 No. (e) Digital Ammeter with selector switch and CTs 0 to 500 Amps -01 No. (f) LED type indicator lamps (R |
| 145 | M&L for renewal of Earthling of poles/system with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick, buried vertically in ground not less than 2.25 metres below ground level with top edge of the plate not less than1.5 mtr below ground level, connected to GI strip 32x6mm by means of nuts,bolts and washers and encased in and inclduing 40mm dia GI light grade pipe upto 2.4 mtr height from ground level fixed by MS flat iron clamp 40mmx5mm with nut , bolt and washers. GI strip fixed to base along pole and connected to exisiting system with alternate layers of charcoal dust, salt packed around plate 150mm thick including watering GI pipe, medium grade 20mm dia, 1.5mtr ling fixed to funnel with wire mesh complete with PCC chamber and RCC chamber cover all as Electrical plate No. 3 SSR part I-2009 including excavation and earth work in any type of starta and testing on completion. (Note:- GI strip and GI pipe beyond 7.5M long shall be measured and paid separately) |
| 146 | Supply and fixing in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete withpoted silica gel driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including connection with 3 core 1.5 sqmm copper conductor cable from junction box / over head line complete all as specified and directed. |
| 147 | S&F in repair cable joint kit for 11 KV grade cable for outdoor termination Heat shrinkable END JOINTtype joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium cable of size 95 sqmm complete all as specified and directed. Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
