|
| 1 | Construction of Embankment with approved material obtained from borrow pits with a lift and leads, spreading, grading to required slope and compacting to meet requirement of Tables 300.2 |
| 2 | Laying of Filter of GSB on slopes and apron including all lead & lifts & including all material, labour, T&P required for proper completion of work. |
| 3 | Laying stone boulder of 25-60 kg weight in apron with split up boulder including all material, labour and T&P etc required with proper completion of the work. |
| 4 | Laying stone boulder of 25-60 Kg. Stone in slope pitching with split up boulder including all material, labour, T&P etc. including carriage upto 100 m. on head load and 6 m lift required for proper completion of the work. |
| 5 | Finishng walls with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even treated surface to remove all dirt and remains of loose powdered materials including curing and cost of all materials. |
| 6 | Class-150 brick work in 1 : 3 cement and coarse sand mortar in foundation/ substructures and superstructures as per MORT&H |
| 7 | Providing and fixing of retero reflacting delinator post IZ-ASTMAD-456-4 Made of 75 mm dia round of 1.2 m high with fixing support |
| 8 | Drainage Spouts complete as per drawing and Technical specification |
| 9 | Providing and applying tack coat with V.G.-10 Bitumen using distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 10 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508. |
| 11 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C, as per Technical Specification Clause 510 |
| 12 | Providing and laying Cement concrete wearing coat M-35 grade including reinforcement complete as per drawing and Technical Specifications |
| 13 | Providing and applying epoxy mortar over honey combed, spelled concrete surface and reinforcement inside and outside surface of RCC structure by epoxy grouting and injection process including cost of nipple, making V groove and plaster with epoxy mortar over the cracks as per MORT&H specification for road & bridge work section 2800. The work includes cost of removal of defective material, cleaning the surface thoroughly and applying of materials as per specification, labour, T&P scaffolding, arrangements required for proper completion of work as per specification & direction of engineer in charge. Please Enable Macros to View BoQ information |
