Tender For Along With The Construction And Development Work Of Constitution Park On The Green Belt Located In Front Of The High Court, The Work Of Maintenance Of Horticulture Work For One Year., Lucknow-Uttar Pradesh

TDR : 55163746

Tender Notice
BOQ

23 Days Left

Lucknow , Uttar Pradesh

Tender Brief : Tender For Along With The Construction And Development Work Of Constitution Park On The Green Belt Located In Front Of The High Court, The Work Of Maintenance Of Horticulture Work For One Year.

Document Fees
₹ 4366 /-

EMD
₹ 1524600.0 /-

Tender Value
₹ 5.08 Crore /-

Submission Date
14-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Supplying and stacking of good earth at site including royalty and carriage upto 20 km lead and lifts (earth measured in stacks will be reduced by 20% for payment). - Supply Earth 20km
2	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil. DSR 2023- 2.8.1
3	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). DSR 2023- 4.1.8
4	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). DSR 2023- 16.69
5	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :, Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 2023- 6.4.2
6	12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand) DSR 2023- 13.4.1
7	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 2023- 13.80
8	Finishing walls with Acrylic Smooth exterior paint of required shade :, New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR 2023- 13.46.1
9	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete., Fixed to openings /wooden frames with rawl plugs screws etc. DSR 2023- 9.48.2
10	Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge., 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. DSR 2023- 16.91.2
11	Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :, 150 mm dia. R.C.C. pipe DSR 2023- 19.6.2
12	Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:, With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR 2023- 18.35.1
13	Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. DSR 2023- 23.9
14	'Providing & fixing sand stone Single piece ornamental bench of approved design pattern (1200x450x450MM) and specifications including , all materials, labour and T & P etc. required for proper completion of work as directed by engineer - in -charge PSR - PSR 4394.76
15	Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :, Red sand stone - exposed face fine dressed with rough backing., 40 mm thick DSR 2023- 8.14.1.4
16	Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in wallswherever required. DSR 2023- 8.15
17	Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases. DSR 2023- 8.16
18	Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR 2023- 11.27
19	Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment). DSR - 2020 (Horticulture)- 2.25
20	Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge DSR - 2020 (Horticulture)- 2.9
21	Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). DSR - 2020 (Horticulture)- 2.8
22	Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). DSR - 2020 (Horticulture)- 2.1
23	Fine dressing of the ground. DSR - 2020 (Horticulture)- 2.7
24	Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. DSR - 2020 (Horticulture)- 2.28
25	Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately), Holes 45 cm dia, and 45 cm deep. DSR - 2020 (Horticulture)- 2.14.4
26	Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Trees Plant DSR - 2020 (Horticulture)- 2.57.1
27	Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Shrubs Plant DSR - 2020 (Horticulture)- 2.57.2
28	Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Hedge Plant /Ground cover DSR - 2020 (Horticulture)- 2.57.3
29	Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 8.46
30	Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 5.3
31	Providing and displaying of Aglaonema ernesto (three in one), having ht. 45 cm & above with 12 to 15 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot.& as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 3.9
32	Providing and stacking of Ophiopogon jaburan ( variegated ),full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 6.21
33	Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. s per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 8.14
34	Rough dressing the trenched ground including breaking clods. DSR - 2020 (Horticulture)- 2.5
35	Providing and stacking of Cassia biflora of height 45-60 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 8.8
36	Providing and stacking of Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 8.1
37	Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 8.7
38	Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 9.7
39	Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots & as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 3.22
40	Providing and stacking of Jacaranda mimosifolia of height 360 cm to 420 cm big foilage well developed multiple branches in 63 cm big poly bags ofsize as per direction of the officer-in-charge - PSR.188
41	Providing and stacking of tabebiua healthy and multibranches of ht.10-12 feet in Earthen pots of size 12'' as per direction of the officer-in-charge. - Sanctioned Rate.13
42	Providing and stacking of Plumeria alba healthy and multi branches of height 10-12 feet in big poly bags of size 18\\" as per direction of the officer-in-charge. - PSR SAUMITRA CE516
43	Providing and stacking of Terminalia Mentali healthy and multi branches of height 10-12. in big polybags of size 18\\" as per direction of the officer-in-charge. (DAR 2020 Hort - 7.88) based - PSR SAUMITRA CE513
44	Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge DSR - 2020 (Horticulture)- 2.34
45	Providing and stacking of Erythrina indica healthy & multi branches of height 12-14 feet in big poly bags of size 18\\" as per direction of the officer-in-charge. - Erythrina indica
46	Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge., Play grounds / Public parks (1Mali for 2.00Acre). DSR - 2020 (Horticulture)- 2.40.5
47	Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. DSR - 2020 (Horticulture)- 2.36
48	Supply & stacking Urea 40% Nitrogen @ 160 kg per acre (as per yard stick of CPWD LDA SOR 2018-19/11.1 ( @2512kg for 30 acres ) - CPWD LDA 2018-19/11.1
49	Supply & stacking DAP 50 kg per acre/year. LDA SOR 2018-19/11.2 - CPWD LDA 2018-19/11.2
50	Supply & Stacking Bone Meal/ Oil Cake (LDA SOR Horti 2018-19/11.3) 50 kg per acre/Year - CPWD LDA 2018-19/11.3
51	Supply and fixing of 4000mm decorative ribbed steel poles are made out of mild steel galvanized rebbed extrusion profile having bottom section dia125mm and upper section dia 81mm with cast iron embellishment e8 & with having for twin nos bracket. The pole have a service window at bottom section wih heavy duty four way connector and a mcb. Mild steal base plate with four nos. mounting holes is fixed and welded with bottom section . pole is primer coated and polyurethene painted . - PSR..01
52	Supply and fixing of OVER 600 mm long aluminium dia cast body post top is mounted at the top with polycarbonate diffuser and fitted with 40 W led disc bis registered make philip, bajaj,twinkle, lustore or equivalent repuateted make. - PSR..02
53	Supply, Installation, Testing and Commissioning of 15 W LED Bollard Light with mounting base accessories having LED operating life >50000 burning hours, Input Voltage range of 160V-260V, LED chip make Cree, Citizen, Osram, Nichia. Working temperature -10deg - 60 deg C, colour temprature should be 3000K/4000K/6000K, Good Thermal management System with inbuilt drivers. Corrosion resistant aluminum cast housing and Ingress Protection IP66. Size of the shall be Square 150mm x 150mm x 600mm Height complete in all respect as directed by Engineer-in-charge.. - 15wledb
54	PWD 651 E&M 2018 Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. - PWD 651
55	1454 PWD E&M 2018 Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. CAT-AA - 1454 PWD E&M 2018
56	S/E of G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects SI.No. 628/18. PWD E/I 2018 - S/E
57	S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by E/I. SI. No. 289/18. - S/W
58	Supply and fixing 40 Amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. - 409(7)
59	S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 10 sq. mm 4 core - PWD SOR 501 10 sq. mm 4 core 327
60	S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 - PED SOR 501 (a) 35 Sq.mm 3.5Core 373
61	S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 (b) 16 Sq.mm 4 Core - PWD SOR 501 (b) 16 Sq.mm 4 Core 343
62	S/L of following cable \\"Al\\" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 (c) 70 Sq.mm 3.5 core - PWD SOR 501 (c) 70 Sq.mm 3.5 core 613
63	S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18. 10 sq. mm 4 core - M.R 4917.128
64	S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18.25 sq. mm 4 core - psr/27
65	S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18.50 sq. mm 4 core - psr/48
66	S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18. 16 sq. mm 4 core - psr/21
67	S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. For singel support ANNEXURE 6 - SL NO. 17 - PSR..03
68	S/F of 6 Amp to 32 Amp. SPMCB (10KA) C curve complete in all respect as per direction of Engineer-in-charge. SI No. 1002/18. CAT-A. - DSR 2018 (E/M)-1002
69	( Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TNP-2 Nos. Cat. B. Cubicle Type PWD SI No : 802 (a) Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. ( Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TNP-2 Nos. Cat. B. Cubicle Type PWD SI No : 802 (a) - PWD SI No : 802 (a)
70	Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PWD SI No :725 (A) - U.P. P.W.D., & C.P.R.I. Certified. PWD SI No :725 (A)
71	Supply and Laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. 33.01 (Jal Nigam Varanasi SOR) 63mm dia HDPE Pipe PN-6: ClassPE-100 - 33.01 (Jal Nigam Varanasi SOR).
72	'PROVING OF HDPE PIPE DN 90MM PE-100 (SDR-21) AS PER IS:4984:2016 (ISI MARK) with Pressure rating of 6Kg/cm2 or More). All complete as per specification and direction of Officer in charge -4917.4
73	'PROVING OF HDPE PIPE DN 63MM PE-100 (SDR-21) AS PER IS:4984:2016 (ISI MARK) with Pressure rating of 6Kg/cm2 or More). all complete as per specification and direction of Officer in charge. -4917.5
74	Supply, Installation, laying & commissioning of HDPE Flange with tail piece, packing & nut bolt complete in all respect. - PSR 4805.62
75	Supply, Installation, laying & commissioning Of reducer 90 mm to 63 mm outer dia 6Kg/cm2 HDPE pipe. - PSR 4805.63
76	Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 90 mm HDPE pipe - PSR 4805.64
77	Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 63 mm HDPE pipe. - PSR 4805.65
78	Supply, Installation, laying & commissioning Of TEE JOINT 90 DEGREE FOR 90 mm HDPE pipe. - PSR 4805.66
79	Supply, Installation, laying & commissioning Of TEE JOINT 90 DEGREE FOR 63 mm HDPE pipe. - PSR 4805.67
80	Supply, Installation, laying & commissioning Of for 63 mm TAIL PIECES. - PSR 4805.69
81	Supply, Installation, laying & commissioning of for 90 mm TAIL PIECES HDPE PIPES. Market Rate - TAIL PIECES HDPE PIPES Market Rate
82	Supply, Installation, laying & commissioning Of PRESSURE Gauge 2.5\\" size (Gyceryne). Market Rate - Gyceryne Market Rate
83	3\\" disc filter. Sanctioned Rate - PSR 4805.72
84	2\\" disc filter. Sanctioned Rate - PSR 4805.73
85	Thermos Temperature Controller wuth switch and socket .2 mm cable. - PSR 4805.74
86	Butt velding electric heating plate. - PSR 4805.75
87	3\\" CI butterfly valve. - PSR 4805.76
88	2\\" CI butterfly valve. Market Rate - 2\\" Cl butterfly valve market rate
89	Supply, Installation, laying & commissioning of Service Saddle 3 inch x 1.25 inch. Sanctioned rate with bush - PSR 4805.78
90	Supply, Installation, laying & commissioning of Service Saddle 3 inch x 1.25 inch. Sanctioned rate with bush - PSR.152
91	Supply, Installation & commissioning of pop sprinkler plastic make material with 10- 12 meter range 360 degrees. - PSR 4805.82
92	Supply, Installation, laying & commissioning of 25 mm outer dia 6Kg/cm2 CPVC pipe. - PSR 4805.80
93	Supply, Installation, laying & commissioning Of Ball Valve for 25 mm pipes. - PSR 4805.81
94	\\"Supply, Installation & commissioning of pop sprinkler plastic make material with 3 - 4 meter range 360 degrees MR\\" - pop sprinkler 10-12m market rate
95	Engagement of Plumber for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter. Rs. 420.00+10%CP - Approved Rate Rs. 462.00
96	Arrangement of sweeper gang full time. PWD SOR 2020-21/Labour Chapter/51 0
97	Supply, Installation, laying & commissioning of Swing Joint for 3 - 4 meter range 360 degree popup. Market Rate - 3-4 meter range 360 degree popup market rate
98	Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level., All types of soil, 300 mm dia DSR 2023- 23.2.1.1
99	Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings& accessories etc. all complete, for all depths, as per direction of Engineer-in-charge., 200 mm nominal size dia DSR 2023- 23.3.3
100	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge., 200 mm nominal size dia DSR 2023- 23.4.3
101	Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR 2023- 23.6
102	Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:, 200 mm dia DSR 2023- 23.13.3
103	Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete., 200 mm clamp DSR 2023- 23.14.3
104	Supply and fixing of pump set & composite electric panel for submersible kirloskar/ sons/ crompton openwell pumpset greeves make three phases 380-440 v 50 cycles supply with fountain bolts and 3 core 2.5 mm flat PVC flexible copper conductor double insulated submersible cable and 4 core 1.5 mm form fountain pool to fountain electric panel etc fountain pool to fountain electric panel etc. complete with internal wiring lighting system.7.5 HP pump - PSR
105	Supply and fixing of pump set & composite electric panel for submersible kirloskar/ sons/ crompton openwell pumpset greeves make three phases 380-440 v 50 cycles supply with fountain bolts and 3 core 2.5 mm flat PVC flexible copper conductor double insulated submersible cable and 4 core 1.5 mm form fountain pool to fountain electric panel etc fountain pool to fountain electric panel etc. complete with internal wiring lighting system.Electric Panel Box - PSR .
106	Supply/ erection of 3 HP KSB/Crompton or equalent submersible pump with motor including 15 sqm 3 core cable, (approx 45 meter length) including cost of steel rope and panel. - sanctioned rate.88
107	SITC of 1.1 kV grade double insulated copper flexible cable 2.5 sq.mm x 2 core for lights, As per direction of UPPCL COST SCHEDULE ANNEXURE 10 SI NO. 19 (i) - SITC of 1.1 ii
108	'Plumber/Electrician (licenced with kit) grade 1/PWD SOR - PWD SOR 4394.243
109	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge., All kinds of soil DSR 2023- 2.6.1
110	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :, 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 2023- 4.2.2
111	Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers DSR 2023- 5.9.5
112	Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick DSR 2023- 5.9.20
113	Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the work and including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level - L.D.A APPRO.
114	Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete DSR 2023- 10.1
115	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. - DSR 9.48
116	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti- termite treatment (excluding the cost of chemical emulsion) :, Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :, With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. DSR 2023- 2.35.3.1
117	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 2023- 6.1.2
118	Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources). DSR 2023- 4.10
119	Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. DSR 2023- 4.13
120	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately), Second class teak wood, 35 mm thick shutters DSR 2023- 9.5.1.1
121	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)., Second class teak wood DSR 2023- 9.1.1
122	Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :, 5.5 mm thick glass panes. DSR 2023- 10.30.2
123	Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete :, 125x65x2.12 mm DSR 2023- 9.55.1
124	Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378), 200x10 mm DSR 2023- 9.63.2
125	Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378), 100 mm DSR 2023- 9.66.2
126	12 mm cement plaster of mix :, 1:6 (1 cement: 6 coarse sand) DSR 2023- 13.4.2
127	Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement., 12 mm cement plaster DSR 2023- 13.9.1
128	Add for Plaster drip course/groove in plaster the all or in ceiling vertically or horizontally as required. - PSR..Plaster drip
129	Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete., Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate DSR 2023- 11.3.1
130	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels., Granite stone slab colour black, Cherry/Ruby red, Area of slab over 0.50 sqm DSR 2023- 8.2.2.2
131	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:, New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR 2023- 13.47.1
132	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :, Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture DSR 2023- 13.48.3
133	Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour., Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface) DSR 2023- 13.82.2
134	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :, With average thickness of 120 mm and minimum thickness at khurra as 65 mm. DSR 2023- 22.7.1
135	Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in heavy gauge rigid steel conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G copper earth continuity wire & piano type switch etc. complete in all respects. - PSR 1
136	Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in heavy gauge rigid steel conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G copper earth continuity wire & piano type switch etc. complete in all respects.but for fan. and light duty exhaust fan - PSR 2
137	Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in heavy gauge rigid steel conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G copper earth continuity wire & piano type switch etc. complete in all respects.but for 5 amp plug point with piano type switch & socket etc. - PSR 3
138	Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in heavy gauge rigid steel conduit pipe partly concealed in wall & partly laid in slab along with the Add for light / fan points with modular type switches in place of piano type switches - PSR 4
139	Add for plug point with modular switch & socket in place of piano type switch & socket - PSR 5
140	Supply & fixing of power plug with 20 amp 250 volts flush type modular switch and 5 pin 20 amp 250 volts flush type universal modular socket on concealed MS box including supply of all material, labour T&P etc. required for proper completion of work - PSR 6
141	Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge rigid steel coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with one no. 14 SWG copper earth continuity wire complete in all respects.2 x 4 sq. mm. In 20 mm dia conduit. - PSR 7
142	Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge rigid steel coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with one no. 14 SWG copper earth continuity wire complete in all respects.2 x 10 sq. mm. In 25 mm dia conduit. - PSR 8
143	S/F of surface / flush mounting SPN Distribution board (Legrand Lexic) without MCB complete in all respects as directed at site by Engineer-in-charge.12 WAYS CAT B - PSR 9
144	Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) (Legrand Lexic) - PSR 11
145	S/F of 40 Amp DP MCB (10 KA) (Legrand Lexic) - PSR 12
146	S/F of sheet steel enclosure for DP / TP / FP MCB with neutral link and earth terminal. CAT B - PSR 13
147	Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect. SOR 2018 (E-M)- 7.703
148	Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site. SOR 2018 (E-M)- 7.721
149	Supply and laying of ISI marked aluminium conductor PVC / XLPE insulated armoured, served, sheathed cable 1100 volts grade at 750 mm below ground level over a cushion of 75 mm thick sand around & protected with brick on sides & top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.10 sqmm 2 core - PSR 16
150	Supply and fixing brass nickle plated compression glands for PVC insulated armoured, served, sheathed cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth conductor.10 sqmm 2 core - PSR 18
151	Supply & fixing of recess/surface/ pendent mounting round10 to 15 watt LED Down lighter having powder coated die cast aluminium housing with heat silk, diffuser/ reflector and driver set complete in all respect. - PSR 21
152	Supply & fixing of LED tube light with batten suitable for upto 1x22 watt LED tube light fittings including tube on surface complete in all respect Cat- AAA - PSR 22
153	Supply & fixing of recess/ surface mounting round 24 watt to 32 wat tLED down lighter having powder coated die cast alumnium housing with extended heat sink, diffuser / Reflector and driver set completed in all respect. - PSR 23
154	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement, All works upto plinth level, Concrete of M25 grade with minimum cement content of 330 kg /cum DSR 2023- 5.33.1.1
155	M.S Iron work for R.C.C or R.B work. - LDA Approved 4917.102
156	Words with frames and fixed in ms painting and Acrlylic 20 mm sheet. Backlit and each letter with a size of 2x2 ft. - Words with Frames
157	Providing and Displaying Topiary of Ficus of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge. Dsr No 2020/540 -1166.96
158	\\"Design, Drawing, Supply, and Installation of Heritage Lion Statues Size 8X5 FEET Made of White Sandstone, Including Transportation and On-Site Fixing as per Approved Design LDA APPROVED RATES - PSR...01
159	Design, Drawing, Supply, and Installation of FRP Bust Statues of Eminent National Leaders – Dr. Rajendra Prasad, Pandit Jawaharlal Nehru, Sardar Vallabhbhai Patel, Maulana Abul Kalam Azad, Dr. K.M. Munshi, Alladi Krishnaswami Ayyar, N. Gopalaswami Ayyangar, T.T. Krishnamachari, B.N. Rau, Rajkumari Amrit Kaur, Hansa Mehta, M.R. Jayakar, Frank Anthony, G.B. Pant, Dr. Shyama Prasad Mukherjee, Jaipal Singh Munda, and Sucheta Kripalani – All Bust to be Made from High-Quality Fiber Reinforced Plastic (FRP), Height 5 to 6 Feet, Highlighting Their Roles in Drafting the Constitution of India (Any 6). - PSR...02
160	Design, Drawing, Supply, and Installation of 8-10 Feet High Dr. B. R. Ambedkar Statue Holding the Constitution Book in Hand,made by Frp Statue Including Foundation, Transportation, and On-Site Installation as per Approved Design and Specifications.\\" - PSR...03
161	Design, drawing, supply, and installation of aThe Ashok Stambh, or Pillars of Ashoka made from white sandstone. measures 12 feet height. Crafted with fine detailing, it reflects traditional artistry and spiritual significance.Complete with transportation, and on-site installation as per approved specifications.\\" - PSR...04
162	Design, drawing, supply, and installation of aThe Design, Drawing, Transportation, and Installation of Ashoka Chakra Sculpture Made from White SandstoneWith a Total Height of 6 Feet Intricately Designed and Hand-Carved by Skilled ArtisansCrafted Using Durable, Weather-Resistant White SandstoneSymbolizing National Unity and Constitutional Principles To Be installation as per approved specifications.\\" - PSR...05
163	Drawing, Supply, and Installation of Drafting Committee Members’,Devolution and Oath \\"Constituent Member Resin Material, Statues, Height Between 5 to 6 Feet. Made from Premium Quality Resin Material, Ayyangar Expertly Handcrafted by Skilled Artisans with Fine Detailing. Weatherproof, Durable, and Finished with UV-Resistant Coating, Depicting the Visionary Leadership of the Members. Complete with Transportation and On-site Installation as per Approved Specifications ( fIBER lAYER ) - PSR...06
164	Design, Drawing, Supply, and Installation of Signage and Introduction Murals with Wall Etching WorkSize: 2 Feet x 1.5 Feet MS stand 1x1 inch height 3.5 feet Made Using High-Quality Stainless Steel (SS 304 Grade) With Precision Etching, Rustproof and Weather-Resistant Finish Displaying Historical/Informational Content as per Approved Design Including Fabrication, Transportation, and On-site Installation. - PSR...07
165	Design, Drawing, Supply, and Installation of Illustrated Stone Sculpture with precision CNC cutting and detailed hand-crafted finishing. - PSR...08
166	Design, Drawing, Supply, and Installation of diffrent Samvidhan Tree Artwork in Indian Different Languages Size: 8 Feet x 8 Feet Fabricated with Steel Including Complete Fabrication, Transportation, and Installation - PSR...09
167	Design, drawing, supply, and installation of FRP mural diffrent cultral including preparation of concept design and digital artwork, detailed engineering and structural drawings, high-quality FRP casting with UV-resistant and weatherproof coating, modular panel production for ease of transport, MS framing and anchoring system, seamless joint treatment, on-site installation, final polishing and coating. - PSR...10
168	Parliament model of frp Sitting on Brck Padestal of area MADE OF THREE PIECES - PSR...11
169	Constution BOOK - representing the Indian Constitution, crafted using high-grade FRP with 3D molded detailing and artisanal hand painting. The structure will be mounted over a heavy-gauge MS frame for durability.The design includes carved text excerpts from the Preamble in both Hindi and English, with brass inlay highlights and ambient lighting for night-time visibility.8' (H - PSR...12
170	Diorma (2X2 MTR) PSR FRP MURAL - PSR...13
171	Diorma (3X3 MTR) PSR FRP MURAL - PSR...14
172	STONE WALL ( MURAL) - PSR...15
173	Parliament back wall ( MURAL) - PSR...16
174	Supply installation testing and commisioning of weatherised Two-Way 5.25 inch (135mm) Coaxial Speaker with Components: • 5¼” highly weather-resistant driver • ¾” soft-dome highly weather-resistant tweeter and can handle 80W Pink Noise Power Handling (160W program) in direct 8Ώ setting, plus built-in 30W 70V/100V multi-tap transformer, should have Fully isolated center chamber for wiring protection, Frequency Response (-10 dB): 55 Hz - 18 kHz; (±3 dB): 65Hz - 16 kHz; Power Rating1: 160 W continuous Program (2 hrs), 80 W (320W peak), Continuous Pink Noise (2 hrs), 45 W (180W peak) Continuous Pink Noise (100 hrs), Maximum Input Voltage: 23.3 V, Sensitivity2: 86 dB, 1W @ 1m (ave. 80Hz - 16kHz), Nominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground), Directivity Index (DI): 3.4 dB, Maximum SPL 3: 105 dB @ 1m, Low Frequency Driver: 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround, High Frequency: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome. Complete in all respects and as directed by engineer in charge. (JBL/Bose/TW Audio/L Aucostic) complete in all respect as directed by Engineer-in-charge.. - PSR...17
175	Supply, installation, testing and commissioning of Amplifiers for Main Speakers with Four-channel 2400 Watt Network amplifier with DSP with Class D / TD technology, Power Handling : 4 × 2400W @ 4/8 Ohms, 4 × 950 W @ 16 ohms Max power per channel in case of bridge mode / Power managmenet should be 4200watts @ 4 ohms and 4800 watts @ 8 ohms, Input Signal to Noise Ratio >108 dB, Load Impedance Stereo/Dual Mode 2Ω - 16Ω; 70Vrms and 100Vrms 96KHz Sample Rate; DSP Features: classic/linear-phase/FIR speaker processing platform with four throughputs; DSP Features: Group control with Raised Cosine MESA EQ asymmetric filters Peak and RMS limiters, Support Multiple make Speaker presets Comprehensive clocking management system with low latency sample rate conversion; Protection Features: Very High Frequency Protection , Direct Current Protection , Short Circuit Protection, Temperature protection etc, Eight dual-redundant Dante network audio inputs, 4 Analog Inputs, Control port Certifictaion: CE ,ETL (ANSI/UL, CSA) , BIS. (Crown/Bose/TW Audio/L Aucostic) complete in all respect as directed by Engineer-in-charge.. - PSR...18
176	Supplying, installation Testing and Commissioning of 2C x 4 sq mm Copper Speaker Cable in PVC Conduit of specified make, complete with all accessories etc complete as as per the attached approved make list and with proper connections etc complete in all respect as directed by Engineer-in-charge.. - PSR...19
177	Supplying, installation Testing and Commissioningof 2 x 2.5 sq mm Copper Speaker Cable in PVCConduit of specified make, complete as per the attached approved make list and with proper connections etc complete in all respect as directed by Engineer-in-charge.. - PSR...20
178	Supply, Installation, testing and commissioning of Speaker cage made of SS Jali for theft protection. complete in all respect as directed by Engineer-in-charge.. - PSR...21
179	Supply, Installation, testing and commissioning of PoE Ethernet Controller with minimum 8 programmable button and Volume Control, dual-gang US Decora or dual-gang EU form factor, push/rotary encoder, encoder ring, with sleep functionality, support minimum 2 LCD screen having 64x128 pixels screen resolution, Configured within Audio Architect via drag-and-drop, power consumption 300mA max at 48VDC with VW-1 Rated. (JBL/Bose/TW Audio/L Aucostic) complete in all respect as directed by Engineer-in-charge.. - PSR...22
180	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023- 5.1.2
181	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :, 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023- 5.2.2
182	Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting and propping and removal of items for: Foundations, footings, base of columns, etc DSR 2023/5.9.1 DSR 2023- 5.9.1
183	Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts DSR 2023- 5.9.6
184	Centering and shuttering including strutting, propping etc. and removal of form for :, Suspended floors, roofs, landings, balconies and access platform DSR 2023- 5.9.3
185	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :, For fixed portion, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) DSR 2023- 21.1.1.1
186	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):, With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) DSR 2023- 21.3.1
187	Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR 2023- 9.53
188	Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge., Anodized (AC 15 ) aluminium tubular handle bar DSR 2023- 21.12.1
189	Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. DSR 2023- 22.23A
190	Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. DSR 2023- 22.6
191	Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections DSR 2023- 5.30
192	Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. DSR 2023- 11.38
193	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 2023- 8.31
194	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour., Two coats. DSR 2023- 13.83.2
195	Painting or vanishing on iron works in small areas or new wood work with two coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. Paint to be used should confirm to the I.S.I No. 103 1950 OLD DSR- 13.62
196	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made., Frame size 65 x 100 mm DSR 2023- 26.86.5
197	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately), 30 mm thick DSR 2023- 26.87.1
198	Supply fixing of plam or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connections etc. complete in all respects as per direction of Engineer-in-charge. - PSR 17
199	Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. - PSR 19
200	Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. - PSR 20
201	Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:, White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 2023- 17.1.1
202	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:, White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap DSR 2023- 17.7.4
203	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete., Semi rigid pipe, 32 mm dia DSR 2023- 17.28.1.1
204	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR 2023- 17.31
205	Providing and fixing toilet paper holder :, C.P. brass DSR 2023- 17.34.1
206	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall, 40 mm nominal outer dia. Pipes. DSR 2023- 18.7.5
207	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work, 50 mm nominal outer dia. Pipes. DSR 2023- 18.9.6
208	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc., 15 mm nominal outer dia .Pipes. DSR 2023- 18.8.1
209	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc., 20 mm nominal outer dia .Pipes. DSR 2023- 18.8.2
210	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc., 25 mm nominal outer dia .Pipes. DSR 2023- 18.8.3
211	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc., 32 mm nominal outer dia .Pipes. DSR 2023- 18.8.4
212	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :, 40 mm nominal bore DSR 2023- 18.17.3
213	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :, 50 mm nominal bore DSR 2023- 18.17.4
214	Providing and fixing uplasticised PVC connection pipe with brass unions :, 45 cm length, 15 mm nominal bore DSR 2023- 18.21.2.1
215	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:, 15 mm nominal bore. DSR 2023- 18.49.1
216	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms., 15 mm nominal bore. DSR 2023- 18.50.1
217	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931., 15 mm nominal bore. DSR 2023- 18.52.1
218	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :, 15mm nominal bore DSR 2023- 18.53.1
219	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :, Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern DSR 2023- 17.4.4
220	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :, With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR 2023- 18.32.1
221	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:, 150 x 100 mm size P type., With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR 2023- 19.4.2.1
222	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:, 150 x 100 mm size P type., With sewer bricks conforming to IS : 4885 DSR 2023- 19.4.2.2
223	Providing and fixing PTMT Bottle Trap for Wash basin and sink., Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms DSR 2023- 17.70.1
224	Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. DSR 2023- 17.72
225	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 2023- 18.48
226	Providing & fixing of white vitreous china urinal partition for half stall urinals. (Jaquar or equivalent) - 1 PSR 490/CE/2024
227	Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS: 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling/external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. (Make: Supreme / Finolex / Prince) 110mm dia wall thickness 3.2 to 3.8mm - 440AA
228	Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS: 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling/external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. (Make: Supreme / Finolex / Prince) 75mm dia Wall thickness 3.2 to 3.8mm - 315aa
229	Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/slabs and making good the same with cement concrete 1:2:4 complete as required. (Make: Supreme /Finolex/Prince): 50 mm dia. - 105aa
230	Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince).P-Trap type Floor Trap 110 x 75 mm - M.R 03
231	Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. - M.R 04
232	Providing & fixing 50 mm. dia. G.I elbow (drain point) in the toilet floor including 50 mm dia. C.P. waste jali complete as required. - MR 05
233	Providing and Displaying Murraya exotica well developed Plant with fresh & healthy foliage with big Ball and 60 to 75 cm spread Ball, 135 to 150 cm ht., in 54 cm as per direction of the officer-in-charge. - M.R 4917.162
234	Providing and Displaying Radermachera plants of ball shape, having 120-150 cm height with multibranch, fresh and healthy with bottom to top full of lush green leaves well developed in 63 cm plastic pots. - M.R 4917.163
235	Providing and Displaying Topiary of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge. - DSR 2020 Horti 5.40
236	Providing and Displaying Nikotia well developed Plant with fresh & healthy foliage with big Ball and 60 to 75 cm spread Ball, 135 to 150 cm ht., in 54 cm as per direction of the officer-in-charge. - M.R 4917.161
237	Providing and Displaying Ficus Retusa topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 5.24
238	Providing and stacking of Lagerstroemia Flaush (jarool) height 360 cm to 420 cm big foilage well developed multiple branches in 63 cm big poly bags ofsize as per direction of the officer-in-charge. - PSR.168
239	Arrangement of Tractor Trolly including loading unloading of stacked kuda & malwa, removel of Garden wastage including all complete of work. - Sanction Rate LDA 4917.221
240	Plumber/Electrician (Licenced with kit) Grade 1/PWD SOR - PWD SOR 4917.222
241	Cleaning and Sweeping of Lawn / Garden area and keep it neat and clean by mechanized method / manually, remove litter,debries, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per direction of officer -in- charge (All T & P, materials/ articles shall be provided by the contractor.), For Prestigious Area DSR - 2020 (Horticulture)- 2.59.1
242	'Providing and stacking of Tabebiua (Dolne smith) healthy and multi branches of ht.12-14 feet in Earthen pots of size 18\\" as per direction of the officer-in-charge.Sanction Rate. - Sanctioned Rate 4394.223
243	Providing and stacking of Chorisia of height 360 cm to 420 cm big foilage well developed multiple branches in 63 cm big poly bags ofsize as per direction of the officer-in-charge - PSR.187
244	Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 5.11
245	Providing and Displaying Ficus black vivion piller topiary (cylinder type) well developed with fresh & healthy 180 to 210 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. DSR Horticulture 2020/5.20 - DSR Horti 2020 5.20
246	Providing and Displaying Ficus Nuda topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180to 210cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. DSR Horticulture 2020/5.22 -5.22
247	Providing and Displaying Ficus reginold piller type Topiary well developed with fresh & healthy 210 to 240 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge. DSR Horticulture 2020/5.26 -5.26
248	Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge. DSR - 2020 (Horticulture)- 5.18 Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Services Tenders

Space Planning and Designing Tenders

Gardening Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Along With The Construction And Development Work Of Constitution Park On The Green Belt Located In Front Of The High Court, The Work Of Maintenance Of Horticulture Work For One Year., Lucknow-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Along With The Construction And Development Work Of Constitution Park On The Green Belt Located In Front Of The High Court, The Work Of Maintenance Of Horticulture Work For One Year., Lucknow-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us