|
| 1 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffusSupply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75-90 Watt. Confirming to IP 66 and above Protection complete in all respect.as per uppwd schedule 2018/1423 Cat AA |
| 2 | Suppy and erection of Steel tubular pole with 1/6 over all length of grouted with cement concrete in 1:3:6 (1 cement: 3 coarse sand: 6 Stone ballast) including plinthing of pole 30cm above the ground level, plastaring of plinth including excavation back filling etc. the rates include all materials labour and T&P etc. (approved rate GNIDA-27) |
| 3 | 410 SP-17, 8.5 mtr (approx waight 92 kg) |
| 4 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in air the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS-501-507) |
| 5 | i) 16 sq. mm 4 core |
| 6 | S/E of 'D' clamps 50x6MM flat iron on steel tubular pole/steel rail pole with bolts, nuts etc. complete in all respect including with aluminium paint. (PS-623) |
| 7 | S/F of 70x90mm Shackle insulator/100mmx 65mm pin insulator including G.I. Bolt/ spindle nuts etc. complete in all respects. (PS-620) |
| 8 | Supply and fixing following dia G.I. pipe (B class) in pole collar/ foundation for cable entry including bending the pipe to the required shape complete as required (Each piece make 1.5 Mtr Long). Approved rate FTS-134717 (use as street light bracket) GNIDA-38 |
| 9 | 40 mm dia Bracket with D'clamp 2 Nos |
| 10 | Supply & laying of Aluminium conductor XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks onsides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PS-501-507 |
| 11 | J) 3.5 X 25 Sqmm |
| 12 | S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. |
| 13 | 16 Sqmm. (PS-504) |
| 14 | 25 Sqmm. (PS-504) |
| 15 | Supply & erection of overhead line with G.I. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc. complete in all respect. (G.I. wire should use as a support to bind overhead line with it at interval of 5 mtr.) As per UPPWD Schedule-628 |
| 16 | Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. As per UPPWD Schedule-289 |
| 17 | Supply and fixing of M.S. box of size 480mm x 480mm x 200mm deep in sunk for housing BDB/TPN fabricated from 16 gauge M.S. Sheet and 13mm x 2.5mm flat iron etc. painted outside with red oxide primer and inside with synthetic enamel paint complete in all respect. As per UPPWD Schedule-1114A |
| 18 | Supply & fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. Below the GL complete with bolts & nuts & Gl earth wire 7/14. GNIDA-41 |
| 19 | Painting of the electric pole with two coat of Al-paint over red oxide primer complete in all respect. (PS-634) |
| 20 | Supply & Erection of End clamp (J Hook) (AR) Approved rate FTS-134717 |
| 21 | Supply & Erection of Screw Tightner (AR) Approved rate FTS-134717 |
| 22 | Supply and fixing following capacity of automatic street light cubicle contoral panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with ML-3. contactors, HRC fuse, isolating metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. |
| 23 | 25Amp.TPN (As per UP.PWD schedule 2018 item no.807 e (2) |
| 24 | Supply and burying of 40mm dia x 4.5 metres long G.1. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. item no 701 |
| 25 | Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. Uppwd schedule 2018 item no 716 |
| 26 | Labour Cess and GST will be paid extra as per govt. orders Please Enable Macros to View BoQ information |
