|
| 1 | Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1) cement 3 coarse sand: 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filing etc. The rates includes all materials labour & T&P. etc. Complete in all respectas per direction of E-/c GNIDA-SOR-2024/27 |
| 2 | 410 SP-62, 12 mtr. (Approx. wt. 264kg.) |
| 3 | Supply & erection Section Double pole structure on ST pole 410 SP-62 with 1/6 over length of poles grouted with cement concrete in 1:3:6 (one cement: 3 coarse sand 6 Stone ballast) including plingthing of pole 30 cm above grade level, plastering of plinth including excavation & back filling etc. The double pole structure consist of 100X50X6mm 2.50 mtr. & 75X40X6mm 250 mtr M.S. channel and bracings with M.S. clamp packing piece Nuts Bolts etc. The rates includes all materials labour T&P etc. Required for proper completion of work as per direction of E/C GNIDA-SOR-2024/28 |
| 4 | Supply, delivery, laying testing & commissioning of 11KV (E) XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overal PVC outer sheath conforming to IS: 7098 (Part amendments) for following mentioned sizes. it should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand all-round and protected with bricks on sides and at the top surface. The cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the El with Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respect and as per requirement of the job under the direction of Engineer-in charge. GNIDA-SOR-2024/02 |
| 5 | 11 KV XLPE Cable 3C X 300 Sgmm |
| 6 | Supply, Installation, Testing & Commissioning of 11 KV Out door type cable termination kit of 3 core cable with cable termination at the panel 8& transformer complete in all respect as required for proper completion of work as of per direction Engineer-in-charge. (Make- Raychem/C.C.I/Frontec) GNIDA-SOR-2024/05 |
| 7 | 30 X 300 Sqmm |
| 8 | Supply & erection of overhead line with ACSR conductor (dog Conductor) on poles service bracket including bindingetc complete in all respects. UPPWD-2018/627 |
| 9 | Supply & erection of overhead line with G.1. wire no. 8 to 4 SWG on poles/serivce bracket including binding etc complete in all respect UPPWD-2018/628 |
| 10 | Supply & Fixing of 11 KV Polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles. (Jaishree, BHEL RR, Hindustan, Yamuna, AD make) Complete in all respect, as per the direction of E-I/c GNIDA-SOR-2024/67 |
| 11 | Supply & Fixing of 11KV Polymeric Disc with Gun fittings on cross arms/clamps fixed on poles including all Nut. bolts & washer etc. (Jaishree, BHEL, RR, Hindustan, Yamuna, AD, make) Complete in all respect, as per the direction of E /c. GNIDA-SOR-2024/68 |
| 12 | Supply & Fixing of Cross arm made of 100X50X6 mm M.S. channel 2.5 mtr. long on poles with packing, piete, M.S. clamp, Nut bolts etc, complete in all respect, as per direction of E-i/C. GNIDA-SOR-2024/33 |
| 13 | Supply & Fixing of Cross arm made of 100X50X6 mm M.S channel 1.15 mtr. long with M.S. clamp packing piece Nut bolts etc, complete in all respect, as per direction of E-I/C GNIDA-SOR-2024/34 |
| 14 | Supply & Fixing of 0.3 mtr. long top channel for pin made of 100X50X6 mm M.S. channel with M.S. clamp packing box nut bolt etc. complete in all respect, as per direction of E-/C. GNIDA-SOR-2024/35 |
| 15 | Supply & erection of stay set at least 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm G.I stay wire etc in 1.3.6 cement concrete complete in all respect UPPWD-2018/630 |
| 16 | Supply & Fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. below the GL complete with bolts & nuts & Gl earth wire 7/14. Complete in all respect, as per direction of E-/C. GNIDA-SOR-2024/41 |
| 17 | Supply & erection of \\"D\\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts. nuts etc. complete in all respects including painting with aluminium paint. UPPWD-2018/623 |
| 18 | Supply & Laying 160 mm día. H.D.PE pipe for drawing of power cable across the road by drilling of 180 mm dia, at 1 mtr below the road level thereby doing the work of providing HDPE pipe by manual Trenchless method PE 63/PN-8. Complete in all respect as per direction of E-/c. GNIDA-SOR-2024/25 |
| 19 | Supply & Fixing HDPE pipe 160 mm dia PE-63/PN-4 including required material, T&P Etc. Complete in all Mtr. respect as per direction of E-/c GNIDA-SOR-2024/21 |
| 20 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. UPPWD-2018/634 |
| 21 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt Confirming to IP 66 Protection complete in all respect. CAT-AA UPPWD-2018/1424 |
| 22 | Supply, delivery, testing laying of Al conductor HDPE/XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole complete in all respect (CCI, Gloster, Asian, Universal, NICCO, ICL Diamond, Havells, Kalinga. Suraj. Delton Grandley & Polycab, make) Complete in all respect, as per the direction of E-/c. GNIDA-SOR-2024/65 |
| 23 | 2Cx 25 Sqmm. 1C X 25 Sqmm |
| 24 | Supply and Fixing 40mm. dia 1.5mtr. Long G.I pipe 'B' Class bracket with 2 Nos. 'D' clamps 50X6mm. flat iron on steel tubular pole/ PCC pole with bolts, complete in all respect, as per direction of E-VC. nuts etc GNIDA-SOR-2024/38 |
| 25 | Supply and Fixing 50 Sgm to 16Sqm LT ABC Connector on Pole complete in all respect, as per direction of E-/C GNIDA-SOR-2024/39 |
| 26 | Supply & fixing of 75 mm x 90 mm shackle insulator/100 mm x 65 mm pin insulator including G.I. Bolts/spindle nuts etc. complete in all respect. UPPWD-2018/620 |
| 27 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. UPPWD-2018/501 |
| 28 | 3.50 x 50 Sqmm |
| 29 | Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc complete in all respect as per direction of the Engineer-Incharge. UPPWD-2018/504 |
| 30 | 25 Sqmm |
| 31 | 50 Sqmm |
| 32 | Supply & Fixing of XLPE insulated, Copper un-armoured Control cable 1100V grade etc. Complete in all respect. GNIDA-SOR-2024/01 |
| 33 | 30 x 2.5 Sqmm |
| 34 | Supply & Erection of Screw tightener FTS-134717 |
| 35 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. UPPWD-2018/807 |
| 36 | 40 AMP ΤΡΝ |
| 37 | Labour Cess and GST will be paid extra as per govt. orders Please Enable Macros to View BoQ information |
