|
| 1 | E/W in excavation in trenches for foundation & for pipes cables etc.in Ordanry soil (loam cly or sand) including filling lift upto 1.5m. And lead upto 30m. Excavated erth into the tranches or plinth and dressing of sides & ramming bottoms watering and ramming & disposal of suuplus excavated earth as directed by the engineer I/C SI No. 251 |
| 2 | Providing and laying in cement concrete 1:6:12 (1Cement:4 Fine sand of 1.25FM:8graded brick aggregate 40 mm. Nominal size) curring complete. Including cost of work. As per SI No273. |
| 3 | M-150 class brick work in 1:4 cement and fine sand 2.25 fineness modlus includingh supply of all material. Labours and tools and plants etc. requires for proper completion of the work SI. No. 305(B) |
| 4 | 12mm thick in 1:3 cement and c/Sand Below plinth /bearing and roof plaster including material SI No.583 |
| 5 | Providing and laying Cement concrete 1:2:4 (1 cement: 2 coarse sand 4 graded stone ballast 20 mm. nominal size) including supply of all materials. Labour and T&P etc. required for proper completion of the work and curing complete also including cost of formwork in foundation and floors.as per SI No.279(b) |
| 6 | R.C.C. 1:2:4 Cement, C/Sand & 20mm stone grit Including Supply of material T&P etc for Complete work |
| 7 | Mild steel or iron work of heavy sizes such as trusses builts up gates door frames etc. |
| 8 | Supply and Fixing of Welded Mesh 1\\" x 2\\" size of 10 MS gauge wire. |
| 9 | Providing and laying vitrified floor tiles in sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete., complete. As Per DSR No. 11.41.A.2 |
| 10 | Painting or varnishing on three coat iron work in small or new wood work with one coat of redy mixed priming paint and one coat of approved superior quality ready mixed paint of clear synthetic varnish including for proper completion of work. Paint to be used should confrim to the SI no .103 1950 SI No. 641, 642. |
| 11 | Supply and fixing of water supply System including all materials labours complete with all respect. |
| 12 | Supply and Fixing of approved ISI brand stainless steel Water cooler system Volas/Blue star 60/120 lit including all materials labour complete with all respect |
| 13 | Supply and Fixing of approved ISI brand 50LPH Commercial R.O. water purifier System including all materials labour complete with all respect |
| 14 | Provision for electrification work. |
| 15 | Required Material For BoringSupply at site of 110 mm uPVC Plain Pipe (as per IS-12818) 10 kg/sqcm (LS) |
| 16 | Supply at site of 110 mm uPVC Slotted Pipe(as per IS-12818) 10 kg/sqcm (slotted) (LS) |
| 17 | Drilling of 110 mm dia bore by Rig Machine from ground level to the following depth Item No 2.21 (0-32M) |
| 18 | Lowering of assembly (dia 110 mm) plain and slotted pipe from ground level the following depth (0-30M) |
| 19 | Supply and packing of Pea Gravel of Lal Kuwan querry over to 1.6mm to 4.8 mm size for shrouding of bore well around the stainer and upto stainer Item No 5 |
| 20 | Development of TubewellTransportation, Installation Dismantling of 100 PSI Air Compressor |
| 21 | Development of Tubewell by 100 PSI AirCompressor complete |
| 22 | SITC of Pumping Plant including starter, Pannel, Cable complete in all respect with all required material T&P labour. Item No 7.11 HP (50 LPM/45Mtr. Head) |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.As per DSR No. 18.48. |
| 24 | S/F of Sign Board at site |
| 25 | deduction of competitive price efficincy @ 5% Please Enable Macros to View BoQ information |
