|
| 1 | (A) Supply Part-11/.4 KV 400 KVA DISTRIBUTION SUB STATION |
| 2 | 11/.4 KV 400KVA DTR (REC Sep. ord 11/1976 |
| 3 | Prov. ST Pole Pole 9 Mtr. Long W/L 220Kgs |
| 4 | Muff for steel tubular pole with concrete filling |
| 5 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line |
| 6 | MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA's ) |
| 7 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 8 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for transformer bed |
| 9 | X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer] |
| 10 | MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No. |
| 11 | MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos |
| 12 | MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing |
| 13 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos for Transformer LT Distribution Box and G.O switch fixing assembly |
| 14 | G.I. Wire for Earthing |
| 15 | MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos for Transformer LT Distribution Box and G.O switch fixing assembly |
| 16 | G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm for Transformer LT Distribution Box and G.O switch fixing assembly |
| 17 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
| 18 | D.O Fuse unit |
| 19 | Surge Arrester, 9 kV Station Class |
| 20 | Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.) |
| 21 | Stay set complete |
| 22 | Stay wire (7/3.15mm)( 10 Kg per stay set) |
| 23 | Pipe earthing with GI,Charcoal & Salt |
| 24 | Prov. LT distribution panel with ACB (630 A, 50 KA, 4P,1 No.) & SFU (100 A 6 No. rewireble) for 400KVA Trf. as per specification |
| 25 | Half clamp (M.S. Flat 50x6) |
| 26 | Full clamps (M.S. Flat 50x6) |
| 27 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
| 28 | Aluminium Thimbles 300 mm Sq. |
| 29 | Copper Thimble 95 mm sq. |
| 30 | Danger Plate |
| 31 | Barbed wire (REC Sp F 3/1981) |
| 32 | LT Cable 3-1/2 core-400 mm sq.for incomer |
| 33 | LT Cable 3-1/2 core-185mm sq.x6 O/G |
| 34 | Alluminium Paint |
| 35 | Prov.ACSR, 6/1/3.35 mm |
| 36 | Chain link fencing , angle iron, gate etc. for transfromer fencing |
| 37 | Prov. Transformer Bed plinth for 1x400KVA S/Stn structure complete with CC 1:6:12 R.R. massonery & plastering etc. a/w Chain link fencing, Angle iron Gate etc. for DTR Fencing. |
| 38 | LT Switched capacitors 50 Kvar for 400 KVA T/F |
| 39 | HP Monochrome Laser printer (A4) hp Laser 108a with prints up to 20 PPM, 64 MB RAM 600X600 DPI print resolution 150 sheets paper tray caapcity USB 2.0 port -one year warranty |
| 40 | (A) Erection Part-11/.4 KV 400 KVA DISTRIBUTION SUB STATION |
| 41 | 11/.4 KV 400KVA DTR (REC Sep. ord 11/1976 |
| 42 | Prov. ST Pole Pole 9 Mtr. Long W/L 220Kgs |
| 43 | Muff for steel tubular pole with concrete filling |
| 44 | X-Arm: [Channel Iron (100x50x5 mm), Length : 2800 mm X 2 Nos] for incomer line |
| 45 | MS A.I.(50X50x6 mm), Length: 2800 mm x(1 Nos for LA's ) |
| 46 | X-Arm: [Channel Iron (75x40x5 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 47 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for transformer bed |
| 48 | X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of Transformer] |
| 49 | MS A.I.(50X50x6 mm), Length: (2800 mm) x 2 No. |
| 50 | MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos |
| 51 | MS A.I.(50X50x6 mm), Length: (950 mm) x 2 Nos. of bed knee bracing |
| 52 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x2 Nos for Transformer LT Distribution Box and G.O switch fixing assembly |
| 53 | G.I. Wire for Earthing |
| 54 | MS Angle Iron (50X50x6 mm), Length : (450 mm)x1 Nos for Transformer LT Distribution Box and G.O switch fixing assembly |
| 55 | G.O. Switch handle supporting: [C.I. (75x40x6mm), length: 460mm for Transformer LT Distribution Box and G.O switch fixing assembly |
| 56 | G.O AB switch unit (11KV,400,663KA) Tripple pole O/D type |
| 57 | D.O Fuse unit |
| 58 | Surge Arrester, 9 kV Station Class |
| 59 | Discs insulator sets (comp. 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) i/c Dead End Clamps etc.) |
| 60 | Stay set complete |
| 61 | Stay wire (7/3.15mm)( 10 Kg per stay set) |
| 62 | Pipe earthing with GI,Charcoal & Salt |
| 63 | Prov. LT distribution panel with ACB (630 A, 50 KA, 4P,1 No.) & SFU (100 A 6 No. rewireble) for 400KVA Trf. as per specification |
| 64 | Half clamp (M.S. Flat 50x6) |
| 65 | Full clamps (M.S. Flat 50x6) |
| 66 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
| 67 | Aluminium Thimbles 300 mm Sq. |
| 68 | Copper Thimble 95 mm sq. |
| 69 | Danger Plate |
| 70 | Barbed wire (REC Sp F 3/1981) |
| 71 | LT Cable 3-1/2 core-400 mm sq.for incomer |
| 72 | LT Cable 3-1/2 core-185mm sq.x6 O/G |
| 73 | Alluminium Paint |
| 74 | Prov.ACSR, 6/1/3.35 mm |
| 75 | Chain link fencing , angle iron, gate etc. for transfromer fencing |
| 76 | Prov. Transformer Bed plinth for 1x400KVA S/Stn structure complete with CC 1:6:12 R.R. massonery & plastering etc. a/w Chain link fencing, Angle iron Gate etc. for DTR Fencing. |
| 77 | LT Switched capacitors 50 Kvar for 400 KVA T/F |
| 78 | HP Monochrome Laser printer (A4) hp Laser 108a with prints up to 20 PPM, 64 MB RAM 600X600 DPI print resolution 150 sheets paper tray caapcity USB 2.0 port -one year warranty |
| 79 | (B) Supply Part-CT/PT Unit 400 KVA Trf. (1 Nos.) |
| 80 | Prov. 11KV CT-PT unit CT/PT combined unit 11 KV /110V 50/5 A |
| 81 | Prov, Energy meter (3 phase, 4 wire) HT CT type for Above |
| 82 | Pvc Multistrand 2.5 mm Sq. copper wire |
| 83 | 1 Inch dia GI Pipe for concealin |
| 84 | bend joints /elbow |
| 85 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 2 Nos] for supporting main channel for CT-PT unit |
| 86 | MS Angle Iron (50x50x5 mm), Length : 2800mmx 4 Nos. |
| 87 | MS Angle Iron (35x35x5 mm), Length : 2800mmx 2 Nos. |
| 88 | Half clamp (MS Flat 50x6 mm) |
| 89 | Full clamp (MS Flat 50x6 mm) |
| 90 | Nut & Bolts off size |
| 91 | Aluminium Thimble |
| 92 | copper Thimble |
| 93 | (B) Erection Part-CT/PT Unit 400 KVA Trf. (1 Nos.) |
| 94 | Prov. 11KV CT-PT unit CT/PT combined unit 11 KV /110V 50/5 A |
| 95 | Prov, Energy meter (3 phase, 4 wire) HT CT type for Above |
| 96 | Pvc Multistrand 2.5 mm Sq. copper wire |
| 97 | 1 Inch dia GI Pipe for concealin |
| 98 | bend joints /elbow |
| 99 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 2 Nos] for supporting main channel for CT-PT unit |
| 100 | MS Angle Iron (50x50x5 mm), Length : 2800mmx 4 Nos. |
| 101 | MS Angle Iron (35x35x5 mm), Length : 2800mmx 2 Nos. |
| 102 | Half clamp (MS Flat 50x6 mm) |
| 103 | Full clamp (MS Flat 50x6 mm) |
| 104 | Nut & Bolts off size |
| 105 | Aluminium Thimble |
| 106 | copper Thimble |
| 107 | (C) Supply Part-New HT LINE (2.43 Kms. WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES |
| 108 | ACSR 6/1/3.35 (Rabbit) {Includes 3 conductor lengths for 3Φ and Additional 1% (Sag, Jumpering and wastage} |
| 109 | Prov. ST Pole Pole 11 Mtr. Long W/L 227 Kgs/m2 (WITH RULING SPAN 90M, 8 No. Run through and 3 No. Double pole dead end structure |
| 110 | Prov. ST Pole Pole 9 Mtr. Long W/L 200 Kgs |
| 111 | Muff for steel tubular pole (2000mm long) with concrete filling |
| 112 | Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x2 structure( Run Through structure (Formation Tringle) |
| 113 | Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures (Run Through structure (Formation Tringle) |
| 114 | Pole Top Bracket [MSCI:100x50x6mm-100mm] |
| 115 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure (Run Through structure (Formation Tringle) |
| 116 | Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]for Dead End Structures |
| 117 | X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] for Dead End Structures |
| 118 | X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]for Dead End Structures |
| 119 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)for Dead End Structures |
| 120 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure for Dead End Structures |
| 121 | Stay set complete in all respect i/c clamp ( Single Pole-1No. , /D. Pole Structures-4Nos.) |
| 122 | Stay Wire (7/3.15 mm) (9.0 kg Per Stay Set) |
| 123 | G.I. wire |
| 124 | Eye Hook for earth wire |
| 125 | Earth Wire Clamp |
| 126 | HT earthing set complete (REC Constr. Standared J-1) |
| 127 | Half clamp (on D/P dead end str:2Nos. On T/P Dead End String 1 Nos ; on Run Through Str. 3Nos.) |
| 128 | Full clamp (on D/P dead end str:2Nos. On T/P Dead End String 1 Nos ; on Run Through Str. 3Nos.) |
| 129 | Danger Plate (250X200X1.6 mm) |
| 130 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
| 131 | Barbed wire (REC Sp F 3/1981) |
| 132 | G.O AB switch unit (11KV,630 A,25KA) |
| 133 | D.O Fuse unit |
| 134 | M.S. C.I. 2400 mm for Road crossing (75x40x6mm) |
| 135 | Alluminium Paint |
| 136 | (C) Erection Part-New HT LINE (2.43 Kms. WITH ACSR 6/1/3.35 mm sq. ON STEEL POLES |
| 137 | ACSR 6/1/3.35 (Rabbit) {Includes 3 conductor lengths for 3Φ and Additional 1% (Sag, Jumpering and wastage} |
| 138 | Prov. ST Pole Pole 11 Mtr. Long W/L 227 Kgs/m2 (WITH RULING SPAN 90M, 8 No. Run through and 3 No. Double pole dead end structure |
| 139 | Prov. ST Pole Pole 9 Mtr. Long W/L 200 Kgs |
| 140 | Muff for steel tubular pole (2000mm long) with concrete filling |
| 141 | Cross Arm: [Channel Iron (100x50x6 mm), Length 1270 mm (i/c tolerence of 100mm either side) x2 structure( Run Through structure (Formation Tringle) |
| 142 | Angle Iron (50x50x5 mm), Length (2x750) mm x 1 structures (Run Through structure (Formation Tringle) |
| 143 | Pole Top Bracket [MSCI:100x50x6mm-100mm] |
| 144 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure (Run Through structure (Formation Tringle) |
| 145 | Belt Set - MS Angle Iron: 50x50x6, Length [1800 mm x 2 No.]for Dead End Structures |
| 146 | X-Bracing Set - MS Angle Iron: 50x50x6, Length [2125 mm x2 No.] for Dead End Structures |
| 147 | X-Arm(Horizental) - MS C. Iron: 50x50x6, Length [2340 mm x2 No.]for Dead End Structures |
| 148 | Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) x (3 No. conductors) x (2 No. sides)for Dead End Structures |
| 149 | 11 kV Pin Insulators (Porcelain, 12 kV, 10 KN): 3 No per pole structure for Dead End Structures |
| 150 | Stay set complete in all respect i/c clamp ( Single Pole-1No. , /D. Pole Structures-4Nos.) |
| 151 | Stay Wire (7/3.15 mm) (9.0 kg Per Stay Set) |
| 152 | G.I. wire |
| 153 | Eye Hook for earth wire |
| 154 | Earth Wire Clamp |
| 155 | HT earthing set complete (REC Constr. Standared J-1) |
| 156 | Half clamp (on D/P dead end str:2Nos. On T/P Dead End String 1 Nos ; on Run Through Str. 3Nos.) |
| 157 | Full clamp (on D/P dead end str:2Nos. On T/P Dead End String 1 Nos ; on Run Through Str. 3Nos.) |
| 158 | Danger Plate (250X200X1.6 mm) |
| 159 | M. S. Nuts & Bolts off sizes (Galvanised coated) [prefarably 16mm Ø or more (with flat and spring washer) |
| 160 | Barbed wire (REC Sp F 3/1981) |
| 161 | G.O AB switch unit (11KV,630 A,25KA) |
| 162 | D.O Fuse unit |
| 163 | M.S. C.I. 2400 mm for Road crossing (75x40x6mm) |
| 164 | Alluminium Paint |
| 165 | (D) Supply Part-THREE PHASE LT LINE WITH AAAC 6/1/3.35 mm sq. ON STEEL POLES(0.830 KM) 3-phase 4 wire double circuit line |
| 166 | ACSR 6/1/3.35 (Rabbit) {Includes 3 conductor lengths for 3Φ and Additional 1% (Sag, Jumpering and wastage} |
| 167 | Prov. ST Pole Pole 9 Mtr. Long W/L 200 Kgs |
| 168 | Muff for steel tubular pole |
| 169 | Shackle insulators (16KN) (RECD-3/761)(ISS No 1445/1977) |
| 170 | D-iron (U-Clamp) (RECD-4/79)(ISS No 7935/1975) |
| 171 | LT Saty Set Complete REC No 31/1983 |
| 172 | Stay Wire (7/3.15 mm) (8.0 kg Per Stay Set) |
| 173 | Prov. full clamp |
| 174 | Earthing Set |
| 175 | G.I.Wire No 8 SWG Earth wire 1.03km (Sep.G-2/72) for suporting cable |
| 176 | M.S.Nuts & Bolt off Sizes |
| 177 | C.I. 75x40x6mm (Length 2400X2 mm) for centilever double circuit line |
| 178 | Aluminium paint |
| 179 | (D) Erection Part-THREE PHASE LT LINE WITH AAAC 6/1/3.35 mm sq. ON STEEL POLES(0.830 KM) 3-phase 4 wire double circuit line |
| 180 | ACSR 6/1/3.35 (Rabbit) {Includes 3 conductor lengths for 3Φ and Additional 1% (Sag, Jumpering and wastage} |
| 181 | Prov. ST Pole Pole 9 Mtr. Long W/L 200 Kgs |
| 182 | Muff for steel tubular pole |
| 183 | Shackle insulators (16KN) (RECD-3/761)(ISS No 1445/1977) |
| 184 | D-iron (U-Clamp) (RECD-4/79)(ISS No 7935/1975) |
| 185 | LT Saty Set Complete REC No 31/1983 |
| 186 | Stay Wire (7/3.15 mm) (8.0 kg Per Stay Set) |
| 187 | Prov. full clamp |
| 188 | Earthing Set |
| 189 | G.I.Wire No 8 SWG Earth wire 1.03km (Sep.G-2/72) for suporting cable |
| 190 | M.S.Nuts & Bolt off Sizes |
| 191 | C.I. 75x40x6mm (Length 2400X2 mm) for centilever double circuit line |
| 192 | Aluminium paint Please Enable Macros to View BoQ information |
