|
| 1 | Providing, Errection,testing & commissioning of 11 Mtr long ST Poles SP-56 including manual, mechanical carriage, excavation of pole pits |
| 2 | Providing, Errection,testing & commissioning of 9 Mtr long ST Poles SP-33 including manual, mechanical carriage, excavation of pole pits |
| 3 | Providing,Errection,testing & commissioning of 8 Mtr long ST Poles SP-15 including manual, mechanical carriage, excavation of pole pits |
| 4 | Loading,Transportation,insurance,unloading,carriage ,delivery at site and errection of ST Poles 11 m long (410 SP-56) completely errected in the pit of 1/6th of the pole length including excavation and back filling of the pole pit and also incription of permenant marking on each pole (Name of Scheme 2019-20,xx,xx means pole Number).(Poles shall be supplied by the department). |
| 5 | Loading,Transportation,insurance,unloading,carriage ,delivery at site and errection of ST Poles 9 m long (410 SP-33) completely errected in the pit of 1/6th of the pole length including excavation and back filling of the pole pit and also incription of permenant marking on each pole (Name of Scheme 2019-20,xx,xx means pole Number).(Poles shall be supplied by the department). |
| 6 | Loading,Transportation,insurance,unloading,carriage ,delivery at site and errection of ST Poles 8 m long (410 SP-15) completely errected in the pit of 1/6th of the pole length including excavation and back filling of the pole pit and also incription of permenant marking on each pole (Name of Scheme 2019-20,xx,xx means pole Number).(Poles shall be supplied by the department). |
| 7 | Loading,Transportation,insurance,unloading,measuring, ,laying, and stringing of overhead 0.05 (Rabbit) ACSR conductor on cross arms through insulators including joints by PG Clamps where ever required complete in all respects as per REC standard. (conductor to be supplied by the department) |
| 8 | Loading,Transportation,insurance,unloading,measuring binding of conductor ACSR 0.1 (Dog) including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices(conductor to be supplied by the department) |
| 9 | Loading,Transportation,insurance,unloading,measuring, ,laying, and stringing of overhead 0.03 (weasel) ACSR conductor on cross arms through insulators including joints by PG Clamps where ever required complete in all respects as per REC standard. (conductor to be supplied by the department). |
| 10 | Supplying and fixing of pole Earthing Complete by GI Rod 20mm 2.5 mtr long through GI Strip(25x3) to each HT pole including supply and welding of GI channel 70x40x150 on pole for earth connection |
| 11 | Supplying and fixing of pole Earthing Complete by GI Spiral Earthing, 8 SWG 115 turn coil earthing as per REC J-1 drawing |
| 12 | Painting of ST poles with Zinc rich red colour paint upto bottom section & silver colour for rest of of the pole, inscribed with permenent marking on each pole \\"Name of scheme-2016-17/xx\\" (xx mean pole numbers say 01,02...) in white paint in backgound of green paint at conspicious place. The paint shall have to be sprayed not brushed. The rate offered shall include cost of paint etc |
| 13 | Supply and fixing of clamps for LT Shackle insulators (Including Shackle 45 kN insulators) with GI back clamps to be fixed without drilling/punching of poles on ST poles. |
| 14 | Supply and fixing of clamps for LT Shackle insulators (Including Shackle 45 kN insulators) with MS back clamps to be fixed without drilling/punching of poles on ST poles. |
| 15 | Supplying and fixing of Galvanized Nuts and Bolts of sizes. |
| 16 | Supplying and fixing of MS Nuts and Bolts of sizes. |
| 17 | Supplying and erection of GI Channel “V’ cross-arm (75 x 40x6mm) with GI Angle Pole Top Bracket (50x50x6 mm) including back clamps of 50X8 mm for fixing V-Cross arm and pole top bracket without making holes in the ST pole as per REC standard for single pole structure. NOTE: Please refer Pole drawings for details |
| 18 | Supplying and erection of GI channel/angle cross arms including fixing GI channels ( 100x50x6mm)8ft / (75x40x6 mm)8ft / angles(50x50x6 mm)4/5ft with 50X8 mm back clamps without drilling/punching holes in the poles. |
| 19 | Supply and installation of 11KV pin insulators(polymer)5KN with GI pins dia of 25mm as per ISI specification as per REC standard. |
| 20 | Providing & fixing of 11KV G.O Switches of capacity 200 A (09 insulator post type) with arragement for pad locks & operating rod . The operating rod should be G.I Pipe (B-class) of 25 mm dia of requisite length. |
| 21 | Providing & fixing of 11KV Drop out fuse set |
| 22 | Providing & fixing of Lightning Arrestor (station type) |
| 23 | Providing & fixing of Lightning Arrestor (line type) |
| 24 | Providing & fixing of LT Fuse set |
| 25 | Providing & fixing of Disc insulator (45 KN B&S) with GI fitting compitable with ACSR 0.03/0.05/0.1 conductor |
| 26 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 400 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 27 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 300 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 28 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 240 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 29 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 185 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 30 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 120 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 31 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 95 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 32 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 70 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 33 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 50 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 34 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 35 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 35 | Providing & fixing of Single Core Aluminum (Al.) LT Power Cable (1.1 KV grade) 16 mm sq cross section un-armoured XLPE cable with Thermoplastic tape inner sheath from the LT bushes upto the overhead LT bare conductor. |
| 36 | Laying of 11KV AB Cable 35 mm sq |
| 37 | Laying of 11KV AB Cable 50 mm sq |
| 38 | Laying of 11KV AB Cable 70 mm sq |
| 39 | Laying of 11KV AB Cable 120 mm sq |
| 40 | SITC of 11KV Single Core 240mm2 Aluminium flat Strip Armoured XLPE Cable FRLS |
| 41 | Providing, laying, testing & commissioning of 3x35mm sq +1x105mm sq 11kV grade 11 KV (E) Grade Aerial Bunched Cable with 03(three) power cores stranded, compacted circular Aluminium conductor screened with Black extruded semi conducting compound, natural coloured XPLE insulated core screened with Black extruded semi conducting compound and one layer of copper tape and covered with Black extruded PVC (core identification by ridges one, two and three over PVC covering) and one bare Messenger wire: combination of galvanized steel wire and Al. Alloy wires. |
| 42 | Providing, fixing , testing & commissioning of cable kits ( heat shrinkable) |
| 43 | Providing, fixing , testing & commissioning of cable kits ( push on type) |
| 44 | Providing & fixing of Eye hook & suspension clamp assembly |
| 45 | Providing and fixing of Anticlimbing devices on poles made out of fabricated Iron without use of barbed wire type devices). |
| 46 | Providing and fixing of Danger Plates on poles |
| 47 | Providing & fixing of Guy assembly comprising of Guy Wire, Guy insulator, Guy rod and turn buckle complete etc |
| 48 | Supply and laying of Cement bottoming 1:2:4 mix as per REC standards 0.45 cum/pole including muffing 20 cm above ground level plaster and curing of concrete in size of 600x600x1700mm for 9 and 8 mtr long ST poles (540, SP-33 and 15) (the leftover pit after concreting to be filled with soil and boulders)NOTE: Please refer Pole drawings for details 11 KV LINE and LT cable |
| 49 | Providing & fixing of bi-metallic clamps for fixing of LT cable with distribution transformers having capacity upto 100 kVA |
| 50 | Providing & fixing of bi-metallic clamps for fixing of LT cable with distribution transformers having capacity of 200 kVA & above |
| 51 | Providing & fixing of 300 mm sq Aluminum Thimbles for cable terminations |
| 52 | Providing & fixing of 185 mm sq Aluminum Thimbles for cable terminations |
| 53 | Providing & fixing of 120 mm sq Aluminum Thimbles for cable terminations |
| 54 | Providing & fixing of 95 mm sq Aluminum Thimbles for cable terminations |
| 55 | Providing and fixing of three point Sub Station earthing as per REC approved construction standards with F5, F10 & J2 drawings issued by REC as reference. Each electrode to be connected through double GI strips to be fixed on baby insulators. The termination should be bolted and not welded. |
| 56 | Providing Errection, Testing & commissioning of 160 A with breaking capacity of 50 kA MCCB TPN (L&T, Hager, Legrand /Standard make) . The MCCB should be housed in enclosure fabricated out of MS sheet of thickness not less than 2 mm duly powder coat painted. |
| 57 | Providing and fixing of shackle insulators |
| 58 | Providing, Laying, stringing, tensioning and binding of conductor ACSR 0.1 (Dog) including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices |
| 59 | Providing, Laying, stringing, tensioning and binding of conductor ACSR 0.05 (Rabbit) including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices |
| 60 | Providing, Laying, stringing, tensioning and binding of conductor ACSR 0.03 (Weasel) including pre-tensioning for removal of kinks, fixing of hardware fittings and jointing as per standard practices |
| 61 | Loading,transportation Testing & commisioning of 100 KVA Step-down transformer 11/0.440KV(energy efficient) fitted with Silaca Gel Breather,oil filled and tested,complete in all respects including earthing of sub-station as per latest specifications and drawing adopted/approved by the department (to be supplied by Deptt) |
| 62 | Loading,transportation Testing & commisioning of 250 KVA 11/0.433 KV tansformer including sub-station earthing by providing of M.S. rod 16 mm dia (3 No's) as per REC J-I specification, galvanized 25x3 mm flat iron for transformer nuetral and body LA earthing, salt charcol etc complete job (to be supplied by Deptt) |
| 63 | Supply,transportation & fixing of Al.Braces 50X50X6mm (3/4ft)duly fabricated,red oxide & aluminium paint coated including all necessary nuts and bolts & washers (as per the latest specification and drawing approved by the department). |
| 64 | Supply,Installation and fixing of Galvanised Guy Wire No. 7/14 and 8 SWG |
| 65 | Supply, Instalaltion and laying of 16 mm sq 2 core cable (havels/Polycab make) |
| 66 | Supply,Installation and fixing of 11 KV link set as per REC standard |
| 67 | Installation of single phase digital meter with seal and thimbles. |
| 68 | Supply,Installation & fixing of 3-ф prodigy Energy meter 5-30/10-60 Amp DLMS complaint of Accurancy clause including Providing of thimbles for energy meter connection with seal. |
| 69 | supply ,installation, testing and commissioning of kiosk type outdoor HT meter Units at 11 KV level employing CT/PT combo unit with 3 phase 4 wire CT/PT operated fully static, AMR compatible, DLMS complaint Tri-Vector energy meter, with RS-232 communication port and GPRS modem with 35 mm2 3 core 11 KV cable of length 11 mtr and 9 mtr with cable kits fixied on each end of cable. with earthing strip and rods complete. |
| 70 | laying and fixing of 16 mm² 2 core almunium cable (Service line)(Rate to be quoted per meter) complete job with relevant ISI standard. |
| 71 | Providing and fixing of PG Clamps 16mm/10mm with relevant ISI standard. |
| 72 | Supply installation testin and commissioning of 12 V,150 AH 100Am for DG Sets |
| 73 | Supply installation testin and commissioning of 12 V,150 AH inva tubular inverter compatable battery ( Exide/Lumunas/Microtec or equalent make) |
| 74 | Supply installation testin and commissioning of 2000 VA inverter / UPS of (Exide/Lumunas/Microtec or equalent make) |
| 75 | Providing of circuit wires for inverter supply to various rooms with 2.5 mm sq PVC multistranded copper wire along with allied acceseries of og ( Havels/Polycab/finolex make ) |
| 76 | Branch cutting/Prunning of trees for line clearence |
| 77 | SITC of Percing Connectors 50mm² AB LT Cable |
| 78 | SITC of Percing Connectors 120mm² AB LT Cable |
| 79 | SITC of Percing Connectors 16mm² AB LT Cable |
| 80 | SITC of LT AB Cable 120mm² (Reputed /Standard Make) |
| 81 | SITC of LT AB Cable 50mm² (Reputed /Standard Make) |
| 82 | SITC of LT AB Cable 35mm² 4-Core (Reputed /Standard Make) |
| 83 | SITC for GI Suspension Clamps for LT AB Cable |
| 84 | Installation of three phase digital meter with seal and thimbles. |
| 85 | Supply Installation, Testing and cimmissioning of 25 sqmm PVC twin core Al-cable of Standard make, returnable to stores (Reputed/Standard Make) |
| 86 | Supply Installation, Testing and cimmissioning of 16sqmm PVC twin core Al-cable of Standard make, returnable to stores (Reputed/Standard Make) |
| 87 | Supply Installation, Testing and cimmissioningof 1.5mmSq Multi Stranded Cable for operation of LED Lights, returnable to stores (Reputed/Standard Make) |
| 88 | Supply Installation, Testing and cimmissioning of LED Lights 64/110watt, returnable to stores(Reputed Brand) |
| 89 | Providing , installation, laying and operation of fancy decoration strings of 30 Ft length, including all related materials, on Hire Basis for two days at below mentioned sites |
| 90 | Supply Installation, Testing and cimmissioning of LED Lamp 9watt, Please Enable Macros to View BoQ information |
