|
| 1 | Earth work in excavation, by mechanical means(hydraulic excavator)/manual means in foundation, trenches of drains at all levels, depth, lifts etc including dressing of sides and ramming of bottoms lift , including getting out the excavated soil and disposal of surplus excavated soil as directed, including dewatering etc during excavation within a lead of 500m. A. Many Places excavation will be done manullay due to space constraints and HT cabling line, trees, DG sets, etc. plesae verify during site visit. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 500 m and lift upto 1.5 m. |
| 3 | Labour Charges for dimantling, refixing, laying, testing & commissioning of 150mmdia or as per site fire line with existing Fire Valve including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets, firehyrdant etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade with base primer complete as required. If any pipe have minor leakge same to be welding with proper method, no extra will be payable rather than quoted amount |
| 4 | Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position with fastner or approiate method. Applying a priming coat of approved steel primer and two coat of enamel paint complete |
| 5 | Providing, laying, testing & commissioning of 'C' classheavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets, Valve etc., existing fire hydrant and fixing the pipe on the wall/ceiling/MS Structure with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint and 01 coat of primer of required shade complete as required : 150 mm dia (Payment of MS frame will be paid extra as per actual weight) Make:- Tata, Jindal, Apollo |
| 6 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizescomplete as required. 150 mm. Dia. Make:- Tata, Jindal, Apollo |
| 7 | Demolishing cement concrete/brickwork/tiles manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge; Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) |
| 8 | Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge |
| 9 | Providing and laying in position cement concrete of specified grade inculding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) . Rates inculsive of filling expansion joints with bitumen or as per direction of Engineerincharge as per site sample without any extra cost rather than quoted amount |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (rates inculsive of one side rough plaster, no extra to be paid rather than quoted amount) |
| 12 | Labour Charges for dismantling and refixing of M-30 Paver block/kerbstone on compacted 50mm thick bed of coarse sand after laying of fire line at as per direction of Engineer-in charges. Rates to be inculsive of labour, sand, etc. required for refixing the diamntled paver block. No extra paid rather than quoted amount. Gaps of paver block to be filled with M-30 grade concrete within the quoted amount |
| 13 | Providing and laying non-pressure NP4 class (Heavy duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 750mm dia |
| 14 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, ofapproved brand & manufacturer, in all colours and shade as per site sample available, laidon 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Proper slope to be mainatined and will be checked after laying of tile. In case slope not proper contractor requires to change the tile with proper slope without any extra cost.Double charge vitrified tile polished finish of Size of Tile 600 x 600 mm or as per site requirement. Color and make should be same of exsiting tile match . |
| 15 | Buy Back of Scrap/damaged of diamntled MS pipe, MS gate and other Old MS Scarp stack near Utility 01 Please Enable Macros to View BoQ information |
