|
| 1 | Maintaining of all industrial and office buildings, 110 KVSS building, Administrative building by doing all kinds of day- to- day plumbing maintenance works such as maintenance /replacement of taps, valves, flush tanks, sanitary fixtures/fittings, pipes including cost of all laborers, tools, tackles etc.., at all heights but excluding cost of materials all complete as directed by the Engineer.Note: Payment for materials required for plumbing maintenance works will be paid under item no.02. |
| 2 | Providing sanitary wares and plumbing fixtures / fittings of approved brand as listed below for carrying out plumbing maintenance works on industrial and office buildings, 110 KVSS building, Administrative building based on actual requirement basis including cost of transportation etc., all complete as directed by the Engineer.2.01). white vitreous China Orissa pattern water closet pan of size 580 x 440 mm with integral type foot rests. |
| 3 | white vitreous china European type water closet with S-Trap conforming to IS specifications including white solid plastic seat and lid |
| 4 | white vitreous china wash basin of size 550 x 400 mm conforming to IS specifications |
| 5 | white vitreous china flat back urinal basin of size 430 x 260 x 350 mm conforming to IS specifications |
| 6 | Hindware Contessa Neo (F330001CP) 15mm nominal bore Pillar Cock |
| 7 | 15 mm nominal bore CP brass bib cock |
| 8 | 15 mm nominal bore CP brass long body bibcock |
| 9 | 15 mm nominal bore CP brass angle cock |
| 10 | 15 mm nominal bore CP brass pressmatic push cock |
| 11 | Hindware Brand 15mm nominal bore CP brass concealed stop cock (Cat No-850031) |
| 12 | 15 mm x 450 mm PVC connection hose |
| 13 | 10 litre low level white PVC flushing cistern |
| 14 | Stainless steel sink waste coupling of 40mm dia |
| 15 | Wash basin waste coupling of dia 32mm |
| 16 | 15mm nominal bore gun metal wheel valve with CI wheel (screwed end) ISI marked |
| 17 | 20mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 18 | 25mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 19 | 32mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 20 | 40mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 21 | 50mm nominal bore gun metal wheel valve with CI wheel(screwed end) ISI marked |
| 22 | 20mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 23 | 25mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 24 | 32mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqm |
| 25 | 40mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 26 | 50mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 27 | 63mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 28 | 90mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 29 | 110mm PVC pipes conforming to IS 4985 with ISI marked, 6 Kg/Sqcm |
| 30 | 110mm PVC pipes conforming to IS 4985 with ISI marked, 10 Kg/Sqcm |
| 31 | 32mm Chlorinated Polyvinyl Chloride Pipes (SDR-11) conforming to IS 15778 with ISI marked |
| 32 | 25mm Unplasticized Polyvinyl Chloride Pipes (Schedule 40) conforming to IS 4985 with ISI marked |
| 33 | 40mm Unplasticized Polyvinyl Chloride Pipes (Schedule 40) conforming to IS 4985 with ISI marked |
| 34 | 50mm Unplasticized Polyvinyl Chloride Pipes (Schedule 40) conforming to IS 4985 with ISI marked |
| 35 | 80mm Unplasticized Polyvinyl Chloride Pipes (Schedule 40) conforming to IS 4985 with ISI marked |
| 36 | 15mm Medium Grade G.I pipes conforming to IS 1239 with ISI marked |
| 37 | 20mm Medium Grade G.I pipes conforming to IS 1239 with ISI marked |
| 38 | 25mm Medium Grade G.I pipes conforming to IS 1239 with ISI marked |
| 39 | 32mm Medium Grade G.I pipes conforming to IS 1239 with ISI marked |
| 40 | 20 mm PVC fixtures |
| 41 | 25 mm PVC fixtures |
| 42 | 32 mm PVC fixtures |
| 43 | 40 mm PVC fixtures |
| 44 | 50 mm PVC fixtures |
| 45 | 63 mm PVC fixtures |
| 46 | 75 mm PVC fixtures |
| 47 | 90 mm PVC fixtures |
| 48 | 110 mm PVC fixtures |
| 49 | 20mm cPVC Fixtures |
| 50 | 25mm cPVC fixtures |
| 51 | 32mm cPVC fixtures |
| 52 | 15 mm GI fixtures |
| 53 | 20 mm GI fixtures |
| 54 | 25mm GI fixtures |
| 55 | 32mm GI fixtures |
| 56 | 40 mm GI fixtures |
| 57 | 50 mm GI fixtures |
| 58 | 75 mm GI fixtures |
| 59 | 25mm uPVC fixtures (Schedule 80) |
| 60 | 32mm uPVC fixtures (Schedule 80) |
| 61 | 40mm uPVC fixtures (Schedule 80) |
| 62 | 50mm uPVC fixtures (Schedule 80) |
| 63 | 65mm uPVC fixtures (Schedule 80) |
| 64 | 80mm uPVC fixtures (Schedule 80) |
| 65 | 150mm x 65 mm uPVC Round Flange with Gasket (Schedule 80) |
| 66 | 25mm uPVC Non Return Valve (ball type) |
| 67 | 25mm uPVC Ball valve |
| 68 | 40mm uPVC Ball valve |
| 69 | 50mm uPVC Ball valve |
| 70 | 65mm uPVC Ball valve |
| 71 | 110mm PVC 10 kg Ball valve |
| 72 | 40mm brass check valve with ISI mark |
| 73 | 50mm brass check valve with ISI mark |
| 74 | Stainless steel hose clamps (Sizes varies from 15 to 90mm) |
| 75 | Nylon/Rubber washer for Siphons/Cocks (Sizes varies from 15mm to 75mm) |
| 76 | 15 mm ceramic spindle suiting to Metro/Hindware bib cock/pillar cock |
| 77 | High polymer butyl rubber waterproof tape (5m Roll 3\\" Width) |
| 78 | PVC Solvent cement |
| 79 | M-SEAL Regular Epoxy Compound (30g) |
| 80 | Gasket shellac compound (25g) |
| 81 | Tafflon Tape (12mmx0.10mmx10mtr) |
| 82 | Sintex Water Tank 1000 litre capacity white colour conforming to IS 12701:96 |
| 83 | Maintaining of all industrial and office buildings, 110 KVSS building, Administrative building by doing all kinds of day- to- day carpentry maintenance works such as replacing of damaged styles and rails of doors/windows, replacing of all damaged fixtures, replacing of door closers / window glass panes, AC sheets including tools and tackles etc.., at all heights but excluding cost of materials all complete as directed by the Engineer.Note: Payment for materials required for carpentry maintenance works will be paid under item no.04. |
| 84 | Providing carpentry fixtures / fittings of approved brand as listed below for carrying out carpentry maintenance works on industrial and office buildings, 110 KVSS building, Administrative building based on actual requirement basis including cost of transportation etc., all complete as directed by the Engineer.4.01) 3\\" Stainless steel Butt hinges |
| 85 | 4\\" Stainless steel Butt hinges |
| 86 | 5\\" Stainless steel Butt hinges |
| 87 | 4\\" Aluminium Tower Bolt |
| 88 | 6\\" Aluminium Tower Bolt |
| 89 | 9\\" Aluminium Tower Bolt |
| 90 | 6\\"Aluminium door handle |
| 91 | Hydraulic door closer |
| 92 | Mortice lock - 6 Lever |
| 93 | 4\\" Single Door stopper |
| 94 | 2\\" Twin Door stopper |
| 95 | 2\\" Stainless steel Hook |
| 96 | 3\\" Stainless steel Hook |
| 97 | 6\\" Stainless steel Hook |
| 98 | SS Star screw (Size varies from 1/2\\" to 3\\") |
| 99 | MS Wire Nails (Sizes varies from 3/4\\" to 2\\") |
| 100 | 3\\" full thread bolt with hex nut and washer |
| 101 | Nylon mosquito net |
| 102 | 6mm thick waterproof plywood |
| 103 | 12mm thick waterproof plywood |
| 104 | 19mm thick waterproof plywood |
| 105 | Concrete Steel Nail (Size varies from 1\\" to 4\\") |
| 106 | SH Synthetic resin adhesive(FEVICOL) |
| 107 | SR998 Synthetic rubber adhesive (FEVICOL) |
| 108 | Standard epoxy adhesive (ARALDITE) 25g |
| 109 | Wood Primer |
| 110 | Enamel Paint |
| 111 | Turpentine (Thinner) |
| 112 | Mirror bevelled edge 600mm x 450mm x 4mm |
| 113 | 250mm x 160mm Aluminium Aldrop |
| 114 | 150mm x 160mm Aluminium Aldrop |
| 115 | PTMT 600 mm long towel rail length 645 mm, width 78 mm and effective height 88 mm |
| 116 | Nylon Rope- 20mm |
| 117 | Maintaining of all industrial and public buildings, 110 KV switchyard, Administrative building campus by doing all kinds of day-to-day masonry maintenance works such as replacing of damaged water closets/paved areas, repairing of RCC fencing posts, arresting leakages through roof, chajja and upper floor toilets, replacing of damaged roof tiles, clamping of loosened door frames, repairing of cracks in wall, water tanks, sewage inspection chambers, manholes, rain water pipes, miscellaneous patch works etc., including cost of all laborers, tools and tackles etc., at all heights but excluding cost of materials all complete as directed by the Engineer.Note: Payment for materials required for masonry maintenance works will be paid under item no.06. |
| 118 | Providing construction materials for carrying out maintenance works on industrial and public buildings, 110 KV switchyard, Administrative building campus based on requirement basis including cost of transportation, stacking etc., all complete as directed by the Engineer.6.01) Portland pozzolana cement (PPC) conforming to IS 1489 Part-I in 50 kg HDPE bags |
| 119 | Medium graded grey M-sand conforming to IS 383 |
| 120 | 12mm / 20mm / 40mm single size machine crushed hard stone aggregates conforming to IS 383 |
| 121 | Well burnt clay chamber bricks of approved brand conforming to IS 1077 |
| 122 | Nitozinc primer |
| 123 | Nitobond EP |
| 124 | Renderoc SP 40 in 25kg bags |
| 125 | Portland white cement |
| 126 | GP2 Non shrink grout in 25kg bags Please Enable Macros to View BoQ information |
