|
| 1 | Dismantling existing plaster /Tiles including displsal of refuse as directed by the Engineer-in-Charge with distance of 60 mts. S.I. No. 706 |
| 2 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 mtr. (200 feet). SOR 708 |
| 3 | Earth work in filling in ordinary soil (loam clay or sand) including cartage of eath 3 km away from site of work |
| 4 | Mild steel or iron work in heavy sizes such as trusses; builts up gates, door frames, record racks, roof work, gates etc. wrought to required form, including drilling holes, rivetting or welding where necessary and also including supply of steel, bolts, nuts etc. & their fixing required for proper completion of the work. |
| 5 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\\") gauge approved stone ballast in the proportion of 1:2:4, in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shutteringe etc. and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item. |
| 6 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks. 10mm dia. and above |
| 7 | 12mm. Thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 1.25 F.M. |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR No 13.80 |
| 9 | Painting 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR 13.47.1 |
| 10 | Painting or vasnishing or iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. Paint to be used should confirm to the ISOR No. 641+642 |
| 11 | supply and fixing of 35 mm thick flush door shutter including fixing of wooden cleats and stopper and i adjustment of hinges bolts locks handles spring and other fitting fitting. DSR 9.20.1 |
| 12 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. DSR 11.40.2 |
| 13 | First Class brick work in 1 : 4 cement and coarst sand of mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work. SOR 305 (b) |
| 14 | Float glass panes of nominal thickness 4 mm DSR 14.5.1 |
| 15 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 17.1.1 |
| 16 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required DSR 17.3.1 |
| 17 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete DSR 17.31 |
| 18 | Providing and fixing wash basin with C.l. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DSR 17.7.A |
| 19 | Supply and fixing brass bib cock heavy quality 15 mm dia (400 gms) ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work..D.S.R.18.15.1 |
| 20 | Exhaust fan (gem Portel) |
| 21 | LED Bulb (gem Portel) |
| 22 | Water supply fitting |
| 23 | Easy Signage and Helpline Numbers Boards. morth 801(8.5) |
| 24 | Instruction for care of toilet and usage of napkins to be put up in board morth 801(8.6) |
| 25 | Sanitary napkin vending machines (gem Portel) |
| 26 | Incinerators (gem Portel) |
| 27 | Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m. dressing of sides and bottom and backfiling in trencher with excavated suitable material. |
| 28 | Providing and laying Cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stones ballast 40 mm. nominal size) including supply of all materials, labour and T & P etc. required for proper completion of the work and curing complete, also including cost of formwork in foundation and floors. Please Enable Macros to View BoQ information |
