|
| 1 | Items: |
| 2 | Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lungs, nuts and bolts if required. One wire 10.00 sq. mm |
| 3 | Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size. to be erected as directed.2.50 Sq.mm 3 core round PVC sheathed. |
| 4 | Supplying & erecting following spare parts for panel mounting Switch Disconnector Fuse Units.Neutral Link for. (i) 32 / 63 / 125 Amps. |
| 5 | Approved make Three pole moulded case circuit breaker having breaking capacity ICU of 25 K.A. at 415V, having normal current rating up to 25A. to100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS = 100% of ICU only Cat. II. |
| 6 | Miniature circuit breaker single pole 6A to 32A. Suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark. |
| 7 | Providing and erecting required size HOT deep Galvanised strip for earthing of H.T. OCB / ACB / Transformer LT panel board, Motors etc. using Proper clamp. |
| 8 | Supplying & erecting earth pit of minimum bore dia. 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipe having Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of 25mm having 200-250 Micron galvanizing, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. (A) For electrical installation up to 440 V in normal soil Length of pip: 1 Mtr. Back filling compound – 1 Nos. Bag of 15 Kg. |
| 9 | Cast iron earth plate size 30 x 30 x 0.35 cms. hurried in specially prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear, conduit run or power plug etc. |
| 10 | Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (A) 4 core 16 sqmm |
| 11 | Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground. |
| 12 | Supplying following size of Light duty “A” Class G.I. Pipe & erecting as directed by Engineer – in – charge. (B) 50 mm. dia. |
| 13 | Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene (conforming to IS 14930 II) with necessary connecting accessories of same material at required depth for laying of cable. Below ground / road surface for enclosing cable and backfilling the same to make ground as per original (A) 50 mm. dia. |
| 14 | Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 25 Sq. mm. |
| 15 | Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C )16 Sq. mm. |
| 16 | Terminal board of size 5.0 x 127 x 152.4mm. bakelite sheet with 15Amp. kitkat pattern porcelain fuse unit with suitable brass studs with nuts, washers and clamps of size 25mm x 3mm suitable for. Pole painted with one coat of red lead paint. |
| 17 | Providing M-20/1:2:4 cement concrete foundation & 70% PCC from bottom including excavation for the pole with 60 x 60 x 120 cms. Deep in below ground level plinth of 45cms x 45cms (or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner. (for 7.5 & 8/8.5 mtr pole). |
| 18 | Supplying and erecting MINI SECTION PILLAR 75 x 60 x 45 cms. fabricated from 16 Gauge. thick joint legs M.S. sheet with angle iron legs 45cms. long made from 35 x 35 x 5mm thick jointless M.S. angles with cable clamps to be buried in ground to have appropriate erection to work Uniform Until erected with cement concrete foundation complete and 45 cms high bricks work finishing with plaster etc hinged double door with 3” x 4” vision panel covered with Mesh & V.panel overlapping with flap for meter reading internal supported on both side, with internal and outside looking arrangement with lock and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting backlite sheet. Painting the Section Pillar inside and outside with three tank powder coated paint. Section pillar roof should be without joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962. (A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle. |
| 19 | (B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS angle. |
| 20 | Supplying and erecting bakelite sheet 12mm thick HYLAM make on existing angle iron frame. |
| 21 | Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme , suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display also comprised permanent ON/OFF switching Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed. |
| 22 | Supplying & erecting power contactor for time switch complete erected as per direction Cat. III.(D) 4 Pole 440V 40 Amp. |
| 23 | Providing I.S mark H.Y.S.D reinforcement for R.C.C work including, bending and placing in position complete upto foor two level. |
| 24 | Supply, erecting, testing & commissioning of Decorative Luminaire for Urban lighting, body made of painted spun aluminium, The deep bowl protector is made of polycarbonate grade UV resistant IK 09 (Confirm by IS10322 report from Third party NABL approved lab) Permanently sealed optical compartment with IP66 protection. (Confirmed by IS10322 report from Third party NABL approved lab) Luminaire offers tool free access to control gear compartment with IP65 protection (Confirmed by IS10322 report from Third party NABL approved lab). Minimum Luminaire dimensions of 545 * 550 mm. Luminaire can be installed as a suspended luminaire. The luminaire is equipped with PMMA lenses with wide photometry for increased pole spacing. The luminaire is provided with disconnect or to avoid electrical shocks. Easy access to control gear compartment by opening special latch kind of arrangement. The luminaire is provide with inbuilt auto cut-off arrangement to save from abnormal power fluctuation. Fixture is having external surge protection of 10 KV. Electronic driver is having power factor>0.90*, THD<20*% and input voltage range from 120-227V AC at 50Hz. Minimum Luminaire efficacy is 115 lm/ watt system lumen 11550 lumen (Confirmed by LM79 report from Third party NABL approved lab) in CCT range of 4000k as per ANSI. CRI>80. Luminaire suitable enough to achieve 25 Avg. lux, with Avg. uniformity—65%, Min/Max-45%, MF-0.85 for 8 mt mounting height and 25 mt spacing (Central or Side). With maximum 1 mt arm bracket and with 0 degree inclination presented with Dialux report and IES file of the luminaire System life of 50000 burning hours with 70% if initial lumens maintained. Luminaire is suitable for operating temperature (Ta) from -20 to 50c. Driver can withstand 320V AC for 48 hours and 360V AC for 2 hours. Watt:110W Make: Keselec, Model: PORTO NU 110 W LED/ Bajaj/ Philips/ Neri/Orient complying above specification as per drawing and as directed by Engineer-in-charge. |
| 25 | Supply of 8 mtr height decorative Chatsworth pole having cast iron decorative octagonal base and pipe dia of 165 mm OD & 1 mtr long with decorative cast iron reducer jointing with 89 mm OD straight pipe with ornamental cast iron ring. Pol shall be mounted on square base plate 280*280*14 mm thickness suitable for mounting on 4 nos. foundation bolts. The pole shaft should be fabricated out of steel tube of grade YSt 240 and batch test reports for chemical and mechanical properties of material should be submitted along with the bid. Structurally designed base plate of steel A36/ A572-50 or equivalent should be welded with the pole shaft. The welding shall be of high quality, carried out by qualified welders using approved welding procedures and tested for its quality through NDT method, such as DP test. The pole shall be provided with an opening at the bottom with removable cover for providing connectors, MCB, etc. (to be supplied by others) Appropriate reinforcement shall be provided to compensate for the loss of section at this point to ensure overall structural stability of the pole under specified operating conditions.The pole shaft structure shall be hot dip galvanized through single dip process as per ASTM A123 and minimum average coating shall not be less than 65 microns. No mechanical operation, such as welding, drilling, etc. should be carried out on the pole structure post hot dip galvanizing. Poles using pre galvanized steel tubes or hot dip galvanized through double dip process are not acceptable.Complete pole shall be treated with high quality primer and thereafter coated with Polyurethane paint to minimum average DFT of 70 Microns. |
| 26 | Supply & fixing of EN-grade foundation bolt M20 x 600mm long. (4 Nos.) |
| 27 | Decorative Double Arm Cascade bracket with 940 mm height mounted on Pole. Decorative Double arm bracket of 1 mt each side (as per attached drawing) as per EN-40 standard, hot dip galvanized as per ASTM A123, with minimum average GI coating of 65 micron, PU painted with DFT of 70 micron using with high quality paint and primer. Bracket weight should not be lesser than 20 kg and bracket is painted with high quality Marine grade paint, painted in closed paint booth chamber in closed and control environment. Model: Chatsworth pole with cascade Bracket. Make: Keselec/ Bajaj/ Philips/ Neri/Orientcomplying technical specification |
| 28 | Horizontal boring below the road more than 0.9 mts. Depth with 4'' size HDPE pipe for cable crossing complete Please Enable Macros to View BoQ information |
