|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shutteringAll work upto plinth level:1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement.All work upto plinth level1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 7 | Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 8 | Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 10 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 11 | First class brick work in foundation and plinthincluding cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 12 | First class brick work in superstructure above plinthlevel & upto floor-five level including cost of allmaterials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 13 | Providing and placing of G.I. pipe over the pump house on top portion of the R.C.C. column as per specification and the direction of the Engineer-in-charge.150 mm dia |
| 14 | 12 mm cement plaster of mixCement mortar 1:4 (1 cement : 4 fine sand) |
| 15 | 6 mm cement plaster of mixCement mortar 1:4 (1 cement : 4 fine sand) |
| 16 | Neat cement punning |
| 17 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD specification and direction of the Engineer - in - charge.External work -i) 40 mm dia nominal bore |
| 18 | ii) 50 mm dia. nominal bore |
| 19 | iii) 25 mm dia nominal bore |
| 20 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete as perCPWD specification and direction of the Engineer - in - charge.(New work)i) 40 mm nominal bore |
| 21 | ii) 50 mm nominal bore |
| 22 | iii) 25 mm dia nominal bore |
| 23 | Providing and fixing brass fullway valve (ISI Mark) with wheel of approved quality as per direction of the Engineer - in - charge.a) 40 mm dia |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:a) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) |
| 25 | Providing and fixing G.I. Union in existing G.I. pipeline, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :a) 40 mm nominal bore |
| 26 | ii) 50 mm dia. nominal bore |
| 27 | iii) 25 mm dia nominal bore |
| 28 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work: I) 40 mm diameter pipe |
| 29 | ii) 50 mm dia. nominal bore |
| 30 | iii) 25 mm dia nominal bore |
| 31 | Cleaning and washing of chocked G.I./ PVC / CPVC / UPVC Pipeline 15 MM to 50 MM nominal bore using Water for jetting / blowback machine with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity having the option of diesel running vehicle mounting hydraulic operated including POL and operator, GI wire, Bamboo etc. after removing the pipeline from hooks and taking out the union joint, socket, elbow, tee and etc. & after which necessary fittings of pipeline with necessary fittings to complete the connection including the trial run for all height & depth etc. with all skilled & semi skilled labour complete as per direction of the Engineer- in-charge. |
| 32 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :a) Rectangular shape 453x357mm |
| 33 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Flexible pipe: 40 mm Dia. |
| 34 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.A) 10 litre capacity-White |
| 35 | Providing and fixing white vitreous china water closet squatting pan (Indian type) a) Orissa pattern W.C. pan of size 580x440 mm |
| 36 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 37 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain boarda) 510x1040 mm bowl depth 250mm. |
| 38 | Providing and fixing wash basin withC.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :a) White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps |
| 39 | Providing and fixing PTMT bib cock of approved quality and colour.a) 15 mm nominal bore, 122 mm long, weighing not lessthan 99 gms. |
| 40 | Providing and fixing PTMT pillar cock of approved quality and colour .a) 15mm nominal bore, 107mm long, weighing not lessthan 110 grams. |
| 41 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 42 | Providing and fixingPTMT angle stop cock 15mm nominal bore, weighing not less than 85gms. |
| 43 | Providing and fixing unplastisisedP.V.C. connection pipe with PTMT Nuts of approved quality and colour.A) 15 mm nominal bore with 45 cm length. |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 45 | Providing & installation of Mono Block Pumpset 3.7 K.W ,5 H.P. 16-18 Mtrs. head 3 phase horizontal motor suitable for 10.000 GPH capacity (Model : KDS-527) (Kirloskar / Crompton / KSB Duke / Lubi make) complete as per direction of the Engg-in-charge.Agg No-T/13/EE/MCD/PWD(R&B)/2025-2026 |
| 46 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.Internal work - Exposed on wall. i) 25 mm dia nominal bore |
| 47 | ii) 40 mm dia nominal bore |
| 48 | iii)50mm dia nominal bore |
| 49 | Providing and fitting fixing of check valve (Vertical) in the saction pipe of under ground reservoire as per direction of the Engineer - in - charge. 50 mm dia.Agg No-T/13/EE/MCD/PWD(R&B)/2025-2026 Please Enable Macros to View BoQ information |
