Tender For Repair & Maintenance Of Water Supply & Sanitary Work For Cpp, For The Year-2026-2028, Anugul-Odisha

TDR : 55152165

Tender Notice
BOQ

9 Days Left

Anugul , Odisha

Tender Brief : Tender For Repair & Maintenance Of Water Supply & Sanitary Work For Cpp, For The Year-2026-2028

Document Fees
Refer document

EMD
₹ 80000.0 /-

Tender Value
₹ 70.57 Lakhs /-

Submission Date
02-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation : Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator)/manual means in foundations, drain, trenches, pavements,manholes, wall footings, pipe lines, cable trenches, pits and over area cuttings etc. for all kinds of works including dressing of sides and ramming of bottoms lift up to 1.5m including getting out the excavated soil and disposal or stacking of surplus excavated materials within a lead up to 50 mtrs, disposed earth to be leveled and neatly dressed as directed with all cost complete as per drawing, specification and direction of Manager-in-charge
2	Surface dressing: Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish lead up to 50m andlift up to 1.5m in all kinds of soil.
3	Filling available excavated Earth : Filling available excavated earth excluding rock in trenches ,plinth, sides of foundation etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead upto 100 M and for all depths complete as per direction of the manager in charge
4	Supply & filling of sand: Supplying and filling of Sand not exceeding 200mm including watering, ramming, compacting, leveling, dressing etc. complete as per drawings, specifications and direction of Engineer-in-charge.
5	Transporting & disposing: Transporting and disposing the surplus earth, debris and soft rock including shrubs and vegetations from construction area beyond the initial lead of50m including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck/tractor measurement, voids shall be deducted as per specification. Lead up to 3.0 km
6	Excavating trenches <80 mm dia : Excavating trenches of required width for laying or dismantling GI/ AC/ SW pipes not exceeding 80mm dia. in all kinds of soil including excavating extra for sockets & depth as per specification making depth upto 1.5M including getting out the excavated materials & refilling the trenches after laying or taking out the pipes.
7	Excavating trenches > 80mm dia : Excavating trenches of required width for laying or dismantling GI/ AC/ SW pipes exceeding 80mm dia. in all kinds of soil including excavating extra for sockets & depth as per specification making depth upto 1.5M including getting out the excavated materials & refilling the trenches after laying or taking out the pipes
8	PCC (1:4:8) : Providing and laying in position Plain cement concrete of proportion 1:4:8 (1 cement : 4 coarse of sand: 8 graded stone aggregate of 40mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement as per specification, drawing and direction of EIC (Cement free issue)
9	PCC (1:2:4): Providing and laying in position Plain cement concrete of proportion 1:2:4 (1 cement : 2 coarse of sand: 4 graded stone aggregate of 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement as per specification, drawing and direction of EIC (Cement free issue)
10	RCC (1:1.5:3) : Providing and laying in position Reinforced cement concrete of proportion 1:1.5:3 (1 cement : 1.5 coarse of sand: 3 graded stone aggregate of 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement as per specification, drawing and direction of EIC (Cement & steelfree issue)
11	Tor steel Reinforcement : Tor steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete as per specification.(Tor steel free issue)
12	Centering and shuttering : Centering and shuttering including strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same afterspecified period etc. all complete and as specified and directed. For all concrete and RCC work
13	Brick masonry work : Providing and laying brick masonry work with fly ash bricks in cement mortar 1:6 (1 cement:6 sand) etc complete as per specification and direction of EIC. (Fly ash brick and Cement free issue) - In superstructure / foundation and plinth for all height.
14	Half brick masonry work : Providing and laying half brick masonry work with fly ash bricks in cement mortar 1:4 (1 cement :4 sand) as per specification with all cost complete asper specification and direction of EIC. (Fly ash brick and Cement free issue)-In Superstructure /foundation and plinth for all height
15	Brick masonry work with dismantled : Providing and laying brick masonry work with dismantled brick salvaged from work with cement mortar 1:6 (1 cement :6 sand) as per specification with all cost complete as per drawing and direction of Engineer-in-charge.(Fly ash brick and Cement free issue) In foundation and plinth for all depth below plinth level.
16	12mm thick cement plaster : Providing 12mm thick cement plaster with cement mortar 1:6 for all height including curing, scaffolding, tools, tackles, labour etc. complete.(cementfree issue)
17	Neat cement punning : Providing neat cement punning including watering, curing etc. all complete at all depth, height, and levels as per specification and direction of Engineer-in-charge.(cement free issue)
18	Repair to plaster : Repair to plaster of thickness 12mm to 20mm on patches of area 2.5 Sqm and under with cement mortar 1:6 (1 cement: 6 coarse sand) including cutting the patch in proper shape, dismantling of old damaged plaster, raking out joints, preparing and plastering the surface of the walls at all height with all cost complete including disposal of rubbish to the dumping ground as per the direction of Manager-in-charge (cement free issue)
19	40mm thick cement concrete flooring : Providing and laying 40mm thick cement concrete flooring 1:2:4 (1 cement:2 sand: 4 graded stone aggregate of 20/12.5mm nominal size) finished with floating coat of neat slurry rounding of edges, preparation of surface, hacking and making the surface rough for bonding of concrete etc as per specification complete (Cement free issue)
20	Ceramic glazed floor tiles : Providing and laying ceramic glazed floor tiles of approved size and make in all colours laid on 20mm thick cement mortar 1:4(1 cement :4 coarse sand)including pointing the joints with white cement and matching pigment etc. complete.(Cement free issue) Glazed tile shall be selected by EIC.
21	Ceramic glazed wall tiles : Providing & laying ceramic glazed wall tiles in wall/dado etc. laid in bed of 12mm thick CM (1:3)fixed with flush pointing in white cement and the colour & brand as approved by the Manager-in-Charge.(Cement free issue).
22	Floors Vitrified tiles size 600x600mm : Providing and laying in floors vitrified tiles size 600x600mm & thickness as per manufacturer specifications of approved make and colour laid on 20mm thick cement mortar (1:cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. completed as per instruction of Manager-in -Charge. (Cement free issue).
23	P/L Vitrified tiles in diff. sizes : Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conformingto I.S.15622,of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand),including grouting the joint with white cement & matching pigments etc. complete.(Cement free issue).
24	Marble stone slab flooring : Marble stone slab flooring over 20mm (avg.) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid & jointed with grey cement slurry includingrubbing & polishing complete for flooring & dado wherever required with medium quality & thickness not loss than 20mm thick of white marble finished to the jointing with white cement slurry etc. compelte (Cement free issue).
25	P/L 18mm thick Granite stone slabs : Providing and Laying to proper line & level 18mm thick Granite stone slabs of approved colour & size over a bed of 20 mm thick base cement mortar 1:4mix (1 cement : 4 coarse sand),including full round nosing finishing the joint, smooth cleaning, rubbing, moulding and polishing etc. All complete the granite slab should be of best available quality having good texture, colour and reflective properties. complete as per specification and direction of MIC.(Cement free issue).
26	(European type) water closet pan: Providing & fixing white vitreous china pedastal type water closet (European type) pan of any approved make with ISI mark.(NEYCER / HINDWARE /PARYWARE) including making all connections but excluding the cost of other fitting as per direction of MIC including replacing by removing/dismantling of damaged material and stacking or disposal of debris to identified area within a lead of 2.0KM where ever requiredetc complete.
27	P/F Wash basin (flat back)550 X 400mm : Providing & fixing of white vitreous china wash basin(flat back)550 X 400mm (NEYCER/ HINDWARE/PARYWARE)of approved make with ISI mark including making connection but excluding the cost of other fittings as per direction of MIC including replacing by removing/dismantling of damaged material and stacking or disposal of debris to identified area within a lead of 2.0KM where ever required etc complete
28	P/F kitchen sink : Providing & fixing White viterous china kitchen sink of size 600X 450 X 250mm of approved make such as Parryware /Neycer or any other approved manufactures and having the ISI mark) including bracket making connection but excluding the cost of other fittings as per direction of MIC including replacing by removing/dismantling of damaged material and stacking or disposal of debris to identified area within a lead of 2.0KM where ever required etc complete
29	P/F Laboratory sink : Providing & fixing White viterous china Laboratory sink of size 450X 300 X 150mm of approved make such as Parryware/ Neycer or any other approved manufactures and having the ISI mark) including bracket making connection but excluding the cost of other fittings as per direction of MIC including replacing by removing/dismantling of damaged material and stacking or disposal of debris to identified area within a lead of 2.0KM where ever required etc complete
30	P/F Half stall urinal basin : Providing & fixing white vetreous china half stall urinal basin of size 580x380x350mm of approved make such as Hindware/Parryware/Neycer & colour with I.S.I mark at any elevation including making all connections but excluding the cost of other fitting as per direction of MIC including replacing by removing/dismantling of damaged material and stacking or disposal of debris to identified area within a lead of 2.0KM where ever required etc complete.
31	P/F water closet squattering pan : Providing & fixing of white vitreous china water closet squattering pan(Orissa type)size 580x440mm of Parryware/Hindware/Neycer make includingmaking all connections but excluding the cost of other fitting as per direction of MIC including replacing by removing/dismantling of damaged material and stacking or disposal of debris to identified area within a lead of 2.0KM where ever required etc complete
32	PVC low level flushing cistern 10 litr : Providing & Fixing of PVC low level flushing cistern 10 lit. capacity with conforming to IS-7231 of (Parry ware/Hindware / Slimline)make with all integral fittings 40mm flush bend and fixtures complete including removing the old one where ever required. (Flush pipe shall be paid extra).
33	Bevelled edge mirror : Providing & fixing of Bevelled edge mirror of size 600 X 450X5mm of approved quality complete with 6mm thick AC sheet/hard board ground fixed to wooden cleats with CP brass screws & washers including using required MS clamps, nails, screws etc. as per the direction of MIC
34	P/F Mirror of superior Glass : Providing and fixing mirror of superior glass(of approved quality) and of required shape and size with frame of approved make and shade with 6 mmthick hard board backing including using required MS clamps, nails, screws etc. complete and as per the direction of Manager in charge
35	P/F Glass shelf : Providing & fixing of glass shelf of size 600 X 120 x 5 mm of approved quality etc. complete supported on aluminium angle farme with CP brass brackets & guard rails complete fixed to wooden cleats with CP brass screws
36	P/ F Towel rail : Providing and fixing Towel rail of cp brass with cp brass bracket anodised aluminium of 20mm dia & 600mm long with brackets fixed to wooden cleats with CP brass screws complete
37	Refixing of CI brackets : Refixing of CI brackets for wash basin/sink/cistern etc. including removing & grouting with cement concrete 1:3:6 etc. complete excluding the cost of fittings.
38	Repairing & refixing of High level/low l : Repairing & refixing of High level/low level/ automatic cistern including tools tackles, scaffolding etc. all bye works etc at all elevation. excluding the cost of fittings
39	32mm dia PTMT waste : Providing & fixing 32mm dia PTMT waste for wash basin/urinal pan/sink etc. replacing by removing/dismantling of damaged material
40	40 mm dia PTMT waste : Providing & fixing 40 mm dia PTMT waste for wash basin/urinal pan/sink etc. replacing by removing/dismantling of damaged material where ever required.
41	CP Brass pillar cock not less than450 gms: Providing & fixing of CP brass pillar cock of 15mm dia for wash basin of any approved brand & make weighing not less than 450 gms with ISI mark (heavy duty) replacing by removing/ dismantling of damaged material where ever required
42	CP Brass pillar cock not lessthan400 gms : Providing & fixing of CP brass pillar cock of 15mm dia for wash basin of any approved brand & make weighing not less than 400 gms with ISI mark medium duty. replacing by removing/dismantling of damaged material where ever required.
43	CP brass long body bib cock : Providing & fixing of CP brass long body bib cock 15mm dia of approved brand & make weighing not less than 690 gms with ISI mark. replacing by removing/dismantling of damaged material where ever required.
44	CP brass Stop cock : Providing & fixing of C.P brass stop cock (consealed)15mm dia of approved brand & make weighing not less than 400 gms with ISI mark medium dutyreplacing by removing/dismantling of damaged material where ever required.
45	CP Shower Rose : Providing & fixing of CP shower rose of 15mm or 20mm inlet 100 mm dia outlet of approved brand & make replacing by removing/dismantling of damaged material where ever required.
46	CP brass concealed stop cock : Providing & fixing CP brass concealed stop cock of approved brand & make weighing not less than 400 gms with ISI mark medium duty. replacing by removing/dismantling of damaged material where ever required.
47	CP brass angle stop cock : P&F of CP brass angle stop cock of approved brand & make weighing not less than 400 gms with ISI mark medium duty. replacing by removing/ dismantling of damaged material where ever required.
48	CP brass dome waste/waste : Providing & fixing C.P brass dome waste/waste for half stall urinal basin of approved brand & make with ISI mark medium duty replacing by removing/ dismantling of damaged material where ever required
49	CP brass spreader for half stall urinal : Providing & fixing CP brass spreader for half stall urinal basin of approved brand & make with ISI mark medium duty replacing by removing /dismantlingof damaged material where ever required.
50	CP knob head : Providing & fixing of CP Knob head of required make(to be fitted properly in existing tap) of 15mm dia all complete replacing by removing/dismantling of damaged material where ever required.
51	P/F of BRASS/GUN 15mm DIA.: Providing & fixing of BRASS/GUN METAL FULLWAY VALVE OF 15mm DIA. (DCI/LINK MAKE or equivalent) all complete. replacing byremoving/dismantling of damaged material where ever required
52	P/F of BRASS/GUN 20mm DIA.: Providing & fixing of BRASS/GUN METAL FULLWAY VALVE OF 20mm.DIA. (DCI/LINK MAKE or equivalent) all complete. replacing byremoving/dismantling of damaged material where ever required
53	P/F of BRASS/GUN 25mm DIA.: Providing & fixing of BRASS/GUN METAL FULLWAY VALVE OF 25mm DIA. (DCI/LINK MAKE or equivalent) all complete replacing byremoving/ dismantling of damaged material where ever required
54	P/F of BRASS/GUN 32mm DIA.: Providing & fixing of BRASS/GUN METAL FULLWAY VALVE OF 32mm DIA. (DCI/LINK MAKE or equivalent) all complete. replacing byremoving/dismantling of damaged material where ever required
55	P/F of BRASS/GUN 40mm DIA.: Providing & fixing of BRASS/GUN METAL/FULLWAY VALVE OF 40mm DIA. (DCI/LINK MAKE or equivalent)all complete replacing byremoving/dismantling of damaged material where ever required
56	P/F of BRASS/GUN 50mm DIA.: Providing & fixing of BRASS/GUN METAL/FULLWAY VALVE OF 50 mm. DIA.(DCI/LINK MAKE or equivalent) all complete replacing byremoving/dismantling of damaged material where ever required
57	P/F of BRASS/GUN 80mm DIA.: Providing & fixing of BRASS/GUN METAL/FULLWAY VALVE OF 80mm DIA. (DCI/LINK MAKE or equivalent) all complete replacing byremoving/dismantling of damaged material where ever required.
58	P/F of 100mm dia C.I FULLWAY WHEEL VALVE : Providing & fixing of 100mm dia C.I FULLWAY WHEEL VALVE with nut& bolts and washers etc complete as per specification & instruction of the engineer in charge replacing by removing/dismantling of damaged material where ever required.
59	P/F brass bib cock 15mm nominal bore : Providing fixing of brass bib cock 15mm nominal bore of approved quality weighing not less than 400 gms excluding the cost of other fittings with all complete replacing by removing/dismantling of damaged material where ever required
60	P/F brass stop cock 15mm nominal bore : Providing & fixing of 15 mm nominal bore brass stop cock of approved quality weighing not less than 400 gms excluding the cost of other fittings with all complete replacing by removing/ dismantling of damaged material where ever required
61	P/F Ball Valve- 15mm : Providing & fixing of 15mm nominal ball valve (brass) of approved quality complete both for high pressure & low pressure with plastic floats with allcomplete replacing by removing/dismantling of damaged material where ever required
62	P/F Ball Valve- 20mm : Providing & fixing 20mm ball valve (brass)of approved quality complete both for high pressure & low pressure with plastic floats with all complete replacing by removing/dismantling of damaged material where ever required
63	P/F Ball Valve- 25mm: Providing & fixing 25mm ball valve (brass)of approved quality complete both for high pressure & low pressure with plastic floats with all complete replacing by removing/dismantling of damaged material where ever required
64	P/F Ball Valve- 40mm: Providing & Fixing of 40mm dia ball valve (Brass) with all assecessories complete as per instruction of the MIC replacing by removing/dismantling ofdamaged material where ever required
65	P/F PVC LL cistern handle: Providing & fixing PVC LL cistern handle with all assecessories complete replacing by removing/dismantling of damaged material where ever required.
66	P/F PVC flush Bend pipe: Providing & fixing 40mm dia PVC flush Bend pipe for low level cistern all associated works complete including grouting with C.C. 1:2:4 and makinggood the wall replacing by removing/dismantling of damaged material where ever required
67	P/F low level Percelain cistern 10 lit. : Providing & fixing low level Percelain cistern 10 lit. capacity of approved make with all necessary fittings & bracket including grouting the bracket with C.C. 1:2:4 and making good the wall. (PARYWARE/SLIM LINE/NEYCER/ HINDWARE.) replacing by removing/ dismantling of damaged material where ever required.
68	P/F PVC waste pipe- 32 mm: Providing & fixing low level Percelain cistern 10 lit. capacity of approved make with all necessary fittings & bracket including grouting the bracket withC.C. 1:2:4 and making good the wall. (PARYWARE/SLIM LINE/ NEYCER/ HINDWARE.) replacing by removing/dismantling of damaged material where ever required.
69	P/F PVC waste pipe- 40 mm : Providing & fixing PVC waste pipe 40 mm with union/couplin clamping with wall for urinal & wash basin and sink.
70	P/F PVC waste pipe- 50 mm : Providing & fixing PVC waste pipe 50 mm with union/ couplin clamping with wall for urinal & wash basin and sink.
71	P/F Plastic bib cock - 15 mm : Providing & fixing of Plastic bibcock 15mm dia. (prayag make )
72	Ball of high pressure float valve : Supplying and fixing of Ball of high pressure float valve (plastic)for 20/25mm valve. for repairing works
73	H.P float valve connecting rod.: Supplying and fixing of H.P float valve connecting rod. for repairing works.
74	PVC washer for bib/stop/pillar cock : Supplying and fixing of PVC washer for bib/stop/pillar cock for repairing works.
75	Rubber gasket for flange/valve : Supplying and fixing of Rubber gasket for flange/valve joint for repairing works.
76	Brass jumper : Supplying and fixing of Brass jumper for repairing brass bib cock & stop cock for repairing works.
77	Polyethylene water storage tank : Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Three layer) of approved make (sintex) ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
78	Supply all labour for placing & fixing : Supply all labour for placing & fixing in position PVC water tank including supply of required jam nuts, gaskets etc complete including making holes both for old or new materials supplied by nalco including cost of all labour, fittings and other accessaries complete as per instruction of the Manager in charge.
79	P/F CPVC Pipes - 15mm dia.: Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 15mm dia pipes, having thermal stability for hot or cold water supply, including all CPVC plain & brass threaded fittings of any approved make confirming IS-15778 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge
80	P/F CPVC Pipes - 20mm dia.: Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 20mm dia pipes, having thermal stability for hot or cold water supply, including all CPVC plain & brass threaded fittings of any approved make confirming IS-15778 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge.
81	P/F CPVC Pipes - 25mm dia.: Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 25mm dia pipes, having thermal stability for hot or cold water supply, including all CPVC plain & brass threaded fittings of any approved make confirming IS-15778 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge
82	P/F CPVC Pipes - 32mm dia.: Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 32mm dia pipes, having thermal stability for hot or cold water supply, including all CPVC plain & brass threaded fittings of any approved make confirming IS-15778 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge.
83	P/F CPVC Pipes - 40mm dia.: Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 40mm dia pipes, having thermal stability for hot or cold water supply, including all CPVC plain & brass threaded fittings of any approved make confirming IS-15778 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge
84	P/F CPVC Pipes - 50mm dia.: Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 50mm dia pipes,having thermal stability for hot or cold water supply,including all CPVC plain & brass threaded fittings of any approved make confirming IS-15778 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge
85	P/F CPVC Pipes - 100mm dia.: Providing & fixing of Chlorinated polyvinyl Chlorinated (CPVC) pipes 100mm dia pipes,having thermal stability for hot or cold water supply,including all CPVC plain & brass threaded fittings of any approved make confirming IS-15778 all complete including cost of fittings, accessories etc as per instruction of the engineer in charge
86	P/F CPVC control valve: Providing & fixing CPVC control valve of different DIA. as per requirement (ASTRAL/SUPREME MAKE or equivalent) all complete replacing byremoving/dismantling of damaged material where ever required
87	P/F of 15mm dia. G.I. Pipes: Providing & fixing of 15mm dia nominal bore medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc havingISI mark and of TATA MAKE. with all fittings (except union) and clamps, including cutting & making good the wall etc for internal/external works.
88	P/F of 20mm dia. G.I. Pipes: Providing & fixing of 20mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and of TATA MAKE. with all fittings (except union) and clamps, including cutting & making good the wall etc for internal/external works.
89	P/F of 25mm dia. G.I. Pipes: Providing & fixing of 25mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and ofTATA MAKE. with all fittings (except union) and clamps, including cutting & making good the wall etc for internal/external works
90	P/F of 32mm dia. G.I. Pipes: Providing & fixing of 32mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and of TATA MAKE. with all fittings (except union) and clamps, including cutting & making good the wall etc for internal/external works.
91	P/F of 40mm dia. G.I. Pipes: Providing & fixing of 40mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and of TATA MAKE. with all fittings (except union)and clamps, including cutting & making good the wall etc for internal/external works
92	P/F of 50mm dia. G.I. Pipes : Providing & fixing of 50mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and ofTATA MAKE. with all fittings (except union) and clamps, including cutting & making good the wall etc for internal/external works
93	P/F of 80mm dia. G.I. Pipes : Providing & fixing of 80mm medium duty G.I pipes for repair & maintenance of water supply work and laying of new lines etc having ISI mark and ofTATA MAKE.with all fittings(except union )and clamps, including cutting & making good the wall etc for internal/external works
94	L/C for L/F of 15mm GI/PVC pipes : Labour charges for laying & fixing of 15mm dia nominal bore. G.I/PVC pipes with fittings including all tools, tackles, jutes & red oxide excluding cutting, trenches, floors & walls both for internal & external works all complete.
95	L/C for L/F of 20mm GI/PVC pipes : Labour charges for laying & fixing of 20mm G.I/PVC pipes with fittings including all tools, tackles, jutes & red oxide excluding cutting, trenches, floors & walls both for internal & external works all complete.
96	L/C for L/F of 25mm GI/PVC pipes : Labour charges for laying & fixing of 25mm G.I/PVC pipes with fittings including all tools, tackles, jutes & red oxide excluding cutting, trenches, floors & walls both for internal & external works all complete.
97	L/C for L/F of 32mm GI/PVC pipes : Labour charges for laying & fixing of 32mm G.I/PVC pipes with fittings including all tools, tackles, jutes & red oxide excluding cutting, trenches, floors & walls both for internal & external works all complete
98	L/C for L/F of 40mm GI/PVC pipes : Labour charges for laying & fixing of 40mm G.I/PVC pipes with fittings including all tools, tackles, jutes & red oxide excluding cutting, trenches, floors & walls both for internal & external works all complete.
99	L/C for L/F of 50mm GI/PVC pipes : Labour charges for laying & fixing of 50mm G.I/PVC pipes with fittings including all tools, tackles, jutes & red oxide excluding cutting, trenches, floors & walls both for internal & external works all complete
100	L/C for L/F of 80mm GI/PVC pipes : Labour charges for laying & fixing of 80mm G.I/PVC pipes with fittings including all tools, tackles, jutes & red oxide excluding cutting, trenches, floors & walls both for internal & external works all complete.
101	Making connection - 15mm to 40mm : Making connection of GI distribution branch with G.I main 15mm to 40mm dia nominal bore. including fixing tee, cutting the existing pipes line to required length, threading the pipe etc. complete (fitting of pipe shall be paid separately in relevant items).
102	Making connection - 50mm to 80mm : Making connection of GI distribution branch with G.I main 50 to 80mm. including fixing tee, cutting the existing pipes line to required length, threading the pipe etc. complete (fitting of pipe shall be paid separately in relevant items).
103	P/F C.I. Mouth - 15mm : Providing & fixing 15mm dia brass ferrule. C.I mouth with fittings including boring & tapping the main
104	P/F C.I. Mouth - 20mm : Providing & fixing 20mm brass ferrule C.I mouth with fittings including boring & tapping the main.
105	P/F C.I. Mouth - 25mm : Providing & fixing 25mm dia. brass ferrule C.I mouth with fittings including boring & tapping the main.
106	P/F G.I. Flange - 40/50mm : providing & fixing of G.I flange with nuts, bolts & rubber gasket etc. 40/50mm dia nominal bore. all complete as per direction of the MIC.
107	P/F G.I. Flange - 80mm : providing & fixing of G.I flange with nuts, bolts & rubber gasket etc.80mm all complete as per direction of the MIC.
108	P/F G.I. Flange - 100mm : Providing & fixing of G.I flange with nuts, bolts & rubber gasket etc.100mm dia all complete as per direction of the MIC.
109	P/F G.I. Plug - 15mm : Supply & fixing G.I PLUG of 15mm dia including dismantaling the old one from the existing pipe line, cutting, threading etc complete
110	P/F G.I. Plug - 20mm : Supply & fixing G.I PLUG of 20mm dia including dismantaling the old one from the existing pipe line, cutting, threading etc complete
111	P/F G.I. Plug - 25mm : Supply & fixing G.I PLUG of 25mm dia including dismantaling the old one from the existing pipe line, cutting, threading etc complete
112	P/F G.I. Plug - 32mm : Supply & fixing G.I PLUG of 32mm dia including dismantaling the old one from the existing pipe line, cutting, threading etc complete
113	P/F G.I. Plug - 40mm : Supply & fixing G.I PLUG of 40mm dia including dismantaling the old one from the existing pipe line, cutting, threading etc complete
114	P/F G.I. Plug - 50mm : Supply & fixing G.I PLUG of 50mm dia including dismantaling the old one from the existing pipe line, cutting, threading etc. complete
115	P/F G.I. Plug - 80mm : Supply & fixing G.I PLUG of 80mm dia including dismantaling the old one from the existing pipe line, cutting, threading etc complete
116	S/F G.I. fittings - 15mm Socket: Supply & fixing G.I fittings 15mm Socket including dismantaling the old one from the existing pipe line, cutting, threading etc complete
117	S/F G.I. fittings - 20mm Socket : Supply & fixing G.I fittings 20mm Socket including dismantaling the old one from the existing pipe line, cutting, threading etc complete
118	S/F G.I. fittings - 25mm Socket : Supply & fixing G.I fittings 25mm Socket including dismantaling the old one from the existing pipe line, cutting, threading etc complete
119	S/F G.I. fittings - 32mm Socket : Supply & fixing G.I fittings 32mm Socket including dismantaling the old one from the existing pipe line, cutting, threading etc complete
120	S/F G.I. fittings - 40mm Socket : Supply & fixing G.I fittings 40mm Socket including dismantaling the old one from the existing pipe line, cutting, threading etc complete
121	S/F G.I. fittings - 50mm Socket : Supply & fixing G.I fittings 50mm Socket including dismantaling the old one from the existing pipe line, cutting, threading etc complete
122	S/F G.I. fittings - 80mm Socket : Supply & fixing G.I fittings 80mm Socket including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
123	S/F Reducer socket - 20mm dia. : Supply & fixing G.I fittings Reducer socket of different dia to 20mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete
124	S/F Reducer socket - 25mm dia.: Supply & fixing G.I fittings Reducer socket of different dia to 25mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
125	S/F Reducer socket - 32mm dia.: Supply & fixing G.I fittings Reducer socket of different dia to 32mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
126	S/F Reducer socket - 40mm dia.: Supply & fixing G.I fittings Reducer socket of different dia to 40mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
127	S/F Reducer socket - 50mm dia.: Supply & fixing G.I fittings Reducer socket of different dia to 50mm including dismantaling the old one from the existing pipe line,cutting, threading etccomplete.
128	S/F Reducer socket - 80mm dia.: Supply & fixing G.I fittings Reducer socket of different dia to 80mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
129	S/F Reducer Elbow- 15mm dia. : Supply & fixing G.I fittings Elbow or Reducing Elbow of 15mm dia. including dismantaling the old one from the existing pipe line,cutting, threading etccomplete.
130	S/F Reducer Elbow- 20mm dia.: Supply & fixing G.I fittings Elbow or Reducing Elbow.of 20mm dia.including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
131	S/F Reducer Elbow- 25mm dia.: Supply & fixing G.I fittings Elbow or Reducing Elbow of 25mm dia including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
132	S/F Reducer Elbow- 32mm dia.: Supply & fixing G.I fittings Elbow or Reducing Elbow. of 32mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
133	S/F Reducer Elbow- 40mm dia.: Supply & fixing G.I fittings Elbow or Reducing Elbow. of 40mm dia. including dismantaling the old one from the existing pipe line,cutting, threading etc complete.
134	S/F Reducer Elbow- 50mm dia.: Supply & fixing G.I fittings Elbow or Reducing Elbow .of 50mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
135	S/F Reducer Elbow- 80mm dia: Supply & fixing G.I fittings Elbow or Reducing Elbow of 80mm dia.including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
136	S/F G.I. TEE - 15mm dia.: Supply & fixing G.I TEE of 15mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
137	S/F G.I. TEE - 20mm dia.: Supply & fixing G.I TEE of 20mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
138	S/F G.I. TEE - 25mm dia.: Supply & fixing G.I TEE of 25mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
139	S/F G.I. TEE - 32mm dia.: Supply & fixing G.I TEE of 32mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
140	S/F G.I. TEE - 40mm dia.: Supply & fixing G.I TEE of 40mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
141	S/F G.I. TEE - 50mm dia.: Supply & fixing G.I TEE of 50mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
142	S/F G.I. TEE - 80mm dia.: Supply & fixing G.I TEE of 80mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
143	S/F G.I. UNION - 15mm dia.: Supply & fixing G.I UNION of 15mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
144	S/F G.I. UNION - 20mm dia.: Supply & fixing G.I UNION of 20mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
145	S/F G.I. UNION - 25mm dia.: Supply & fixing G.I UNION of 25mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
146	S/F G.I. UNION - 32mm dia.: Supply & fixing G.I UNION of 32mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
147	S/F G.I. UNION - 40mm dia.: Supply & fixing G.I UNION of 40mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
148	S/F G.I. UNION - 50mm dia.: Supply & fixing G.I UNION of 50mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
149	S/F G.I. UNION - 80mm dia.: Supply & fixing G.I UNION of 80mm dia. including dismantaling the old one from the existing pipe line, cutting, threading etc complete
150	S/F G.I. BEND - 15mm dia.: Supply & fixing G.I BEND 15mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
151	S/F G.I. BEND - 20mm dia.: Supply & fixing G.I BEND 20mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete
152	S/F G.I. BEND - 25mm dia.: Supply & fixing G.I BEND 25mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete
153	S/F G.I. BEND - 32mm dia. : Supply & fixing G.I BEND 32mm including dismantaling the old one from the existing pipe line,cutting,threading etc complete
154	S/F G.I. BEND - 40mm dia.: Supply & fixing G.I BEND 40mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete
155	S/F G.I. BEND - 50mm dia.: Supply & fixing G.I BEND 50mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete.
156	S/F G.I. BEND - 80mm dia.: Supply & fixing G.I BEND 80mm including dismantaling the old one from the existing pipe line, cutting, threading etc complete
157	S/F G.I. NIPPLE - 15mm : Supply & fixing G.I NIPPLE(maximium upto 300mm length)15mm including dismantaling the old one from the existing pipe line, cutting, threading etccomplete
158	S/F G.I. NIPPLE - 20mm: Supply & fixing G.I NIPPLE (maximium upto 300mm length) 20mm including dismantaling the old one from the existing pipe line, cutting, threading etccomplete.
159	S/F G.I. NIPPLE - 25mm : Supply & fixing G.I NIPPLE (maximium upto 300mm length) 25mm including dismantaling the old one from the existing pipe line, cutting, threading etccomplete.
160	S/F G.I. NIPPLE - 32mm : Supply & fixing G.I NIPPLE (maximium upto 300mm length)32mm including dismantaling the old one from the existing pipe line, cutting, threading etccomplete
161	S/F G.I. NIPPLE - 40mm : Supply & fixing G.I NIPPLE (maximium upto 300mm length)40mm including dismantaling the old one from the existing pipe line, cutting, threading etccomplete.
162	S/F G.I. NIPPLE - 50mm : Supply & fixing G.I NIPPLE (maximium upto 300mm length)50mm including dismantaling the old one from the existing pipe line, cutting, threading etccomplete.
163	S/F G.I. NIPPLE - 80mm : Supply & fixing G.I NIPPLE (maximium upto 300mm length)80mm including dismantaling the old one from the existing pipe line, cutting, threading etccomplete
164	P/F MS Clamps - 15 to 32mm dia. : Providing & fixing MS clamps 15 to 32mmdia for G.I. pipes/PVC pipe of approved quality including nails,rawl plugs, screws, wooden chips etc allcomplete.
165	P/F MS Clamps - 32 to 50mm dia.: Providing & fixing MS clamps 32 to 50 mm dia. for G.I. pipes/PVC pipe of approved quality including nails,rawl plugs, screws, wooden chips etc allcomplete.
166	P/F MS Clamps - 50 to 100mm dia. : Providing & fixing MS clamps 50 to 100 mm dia. for G.I. pipes/PVC pipe of approved quality including nails, rawl plugs, screws, wooden chips etc allcomplete.
167	P/F GI Jam nut upto 50mm dia. : Providing & fixing of GI jam nut up to 50 mm dia all complete.
168	Cutting holes upto 300 x 300mm in wall: Cutting holes upto 300 x 300mm in wall including making good the same & disposal of rubbish including embedding pipes & filling with bricks & cement mortar (1:3) & finishing complete
169	Cutting holes upto 150 x 150 in RCC floo : Cutting holes upto 150 x 150 in RCC floor or roofs for passing drain pipes etc. & repairing the holes after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete.
170	Making connection - 100 - 250mm : Making connection with drain or sewer line with existing man holes including breaking into & makinggood the walls, floors with cement concrete 1:2:4, cement plaster on both side with cement mortar 1:3, finished with neat cement punning & making necessary channels for the drains etc. complete. 100 - 250mm
171	Making connection - 250 - 300mm : Making connection with drain or sewer line with existing man holes including breaking into & makinggood the walls, floors with cement concrete 1:2:4,cement plaster on both side with cement mortar 1:3,finished with neat cement punning & making necessary channels for the drains etc. complete. 250 - 300mm
172	P/F CI/PVC Syphon :Providing & fixing CI/PVC Syphon including coupling & jam nut for automatic/low/high level cistern sanitary fittings of approved quality for repair works all complete
173	P/F Brass Jam nuts : Providing & fixing Brass jam nuts with washers/coupling for high level cistern/sink/ wash basin of 32/40mm dia. sanitary fittings of approved quality forrepair works all complete.
174	P/F of flush bend pipe connection : Providing & fixing of flush bend pipe connection for indian type WC including cutting of floor, jionting, grouting with cc 1:2:4 & making good the floor finished smooth etc.. 40mm dia white PVC bend pipe for low level cistern sanitary fittings of approved quality for repair works all complete.(cement free issue)
175	P/F Urinal glass partition : Providing and fixing of urinal glass partition edges rounded and polished, of size 900mm long 450mm wide and 5 mm thick with clamps,screws Including cutting & making good the wall,cost of all labour, required fittings complete as per direction of Engineer-in-charge
176	P/F Stainless Steel Kitchen Sink : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Size-610x460 mm bowl depth 200 mm as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required.
177	P/F of Brass connecting leverarm : Providing & fixing of Brass connecting lever arm with fitting of low level cistern. sanitary fittings of approved quality for repair works all complete allelevation.
178	P/F of PVC Float valve : Providing & fixing of PVC Float valve of low level cistern sanitary fittings of approved quality for repair works all complete all elevation
179	P/F of Polythene float for low level cis : Providing & fixing of Polythene float for low level cistern. sanitary fittings of approved quality for repair works all complete all elevation.
180	P/F Syphone for L/L cistern : Providing & fixing of syphone for L/L cistern, automatic cistern sanitary fittings of approved quality for repair works all complete
181	Labour charges for CI valve 50 to 150mm : Labour charges for repairing of leakage. for CI valve of 50 to 150mm dia. including all tools, tackles, jutes & red oxide etc with all complete
182	Labour charges for bibcock,stopcock : Labour charges for repairing of leakage in valves/ stop cock/ pillarcock. For bibcock/ stopcock/ pillar cock./spreaders including all tools, tackles, jutes & red oxide etc with all complete at all elevation.
183	Labour charges for H/P Float valve : Labour charges for repairing of leakage in valves/stop cock/ pillarcock. High pressure float valve of over head tanks. including all tools, tackles, jutes & red oxide etc with all complete at all elevation.
184	Labour charges for G.M. valve : Labour charges for repairing of leakage in valves/stop cock/ pillarcock. G.M valve of 15mm to 80mm dia.including all tools, tackles, jutes & redoxide etc with all complete at all elevation
185	Disinfection Cleaning (Below 10000 ltrs. : Disinfection Cleaning of M.S/GI/PVC water(capacity below 10000 ltrs.) over head tank by applying bleaching powder, rubbing by wire brush & washing cleanly with clean water & refixing the drain nut in position including all tools, tackles with all complete at all elevation
186	Disinfection Cleaning (Above 10000 ltrs.: Disinfection Cleaning of M.S/GI/PVC water(capacity above 10000 ltrs.) over head tank by applying bleaching Item no. same as G/16(i) but for cleaning of RCC/MS water over head tank of capacity 10,000 ltrs & above including all tools, tackles with all complete at all elevation
187	Restoration of water supply : Restoration of water supply after attending the faults including closing & opening of valves including all tools, tackles with all complete at all elevation
188	Supply & installation of India mark II h : Supply & installation of India mark II hand pump including accessories strainers, bolts etc excluding suction pipe complete suitable for drawing Water from below 50m. Deptt
189	S/F PTMT Bib cock : Supplying & fixing PTMT Bib cock(An engineering thermo static) water supply fittings & fixtures of approved quality colour & make 15mm nominal bore86mm long with delux handle 102mm high & 43mm wide with 12mm seat dia & replacable washers weighing not less than 90 gms (male or female thread)
190	S/F PTMT Bib cock long neck : Supplying & fixing PTMT Bib cock long neck (An engineering thermo static) water supply fittings & fixtures of approved quality colour & make 15mm bore 122mm long 110mm heigh & 43mm wide etc.weighing not less than 105 gms
191	S/F PTMT Stop cock : Supplying & fixing PTMT STOP COCK (An engineering thermo static) water supply fittings & fixtures of approved quality colour & make, 15mm nominalbore with delux handle, 90mm high & 43mm wide 12mm seat dia & replaceable washers with not less than 95gms (male or female thread)
192	S/F PTMT Pillar cock : Supplying & fixing PTMT PILLAR COCK (An engineering thermo static) water supply fittings & fixtures of approved quality colour & make 15mmnominal size with delux handle,107mm long,131 high and 43mm wide with 12mm seat dia & replaceable washers weighing not less than 120 gms
193	S/F PTMT Push cock : Supplying & fixing PTMT PUSH COCK (An engineering thermo static) water supply fittings & fixtures of approved quality colour & make 15mm nominalbore with 20mm B.S.P female threads 100mm long, 57mm high & 33 wide with 12mm seat dia and replaceable washers weighing not less than 75gms
194	S/F PTMT Gratings: Supplying & fixing PTMT GRATINGS (An engineering thermo static) water supply fittings & fixtures of approved quality colour & make circular typs100/125mm nominal dia 12mm with 25mm waste hole, high domed shape confirming to IS standards & weighing not less than 25gms
195	P/F Symet waste coupling: Providing & fixing Symet waste coupling 31mm of 79mm length & 62mm breadth, having appx. weight 45gms with 1.25\\" B.S.P threads PTMT SYMET Bath assets of PRAYAG POLYMERS[P] Ltd., make or equivalant of approved quality jointed with PTIE Tape as per specification and instruction of Manager-in-charge
196	P/F the PTMT SWIVELLING SHOWER: Providing & fixing the PTMT SWIVELLING SHOWER 15mm bore,95mm long 65mm dia having appx. wt of 45 gms. with appx. 90 holes of 1.2 mm dia Bath assets of PRAYAG POLYMERS[P] Ltd., make or equivalant of approved quality jointed with PTIE Tape as per specification and instruction of Manager-in-charge
197	P/F SYMET SHELF : Providing & fixing the SYMET SHELF size 450/600 mm long 120/124 mm width and 36mm height having appx. wt of 300 gms Bath assets of PRAYAGPOLYMERS[P] Ltd., make or equivalent of approved quality jointed with PTIE Tape as per specification and instruction of Manager-in-charge
198	P/F PTMT TOWEL RAIL : Providing & fixing the PTMT TOWEL RAIL 24\\" with total length of 645mm width 78mm & effective height 88mm with concealed arrangement and appx.weight of 190 gms Bath assets of PRAYAG POLYMERS[P] Ltd., make or equivalant of approved quality jointed with PTIE Tape as per specification and instruction of Manager-in-charge
199	P/F PVC CONNECTION 450 mm : Providing & fixing the PVC CONNECTION 450mm(18\\") long with non corrosive symet nuts Bath assets of PRAYAG POLYMERS[P] Ltd., make orequivalent of approved quality jointed with PTIE Tape as per specification and instruction of Manager-in-charge
200	P/F PTMT ball cock (15mm) : Providing and fixing PTMT ball cock (15mm)of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P/H.P.H.D plasticball.(for water tank) 15mm nominal bore, 110mm long, 70mm high and 40mm wide with piston travel of minimum 5mm having weight not less than 142gms. (62+25+55)(Body+Rod+Ball. Provided leverage of minimum 230mm and one piece moulded H.D plastic ball of 114mm dia
201	P/F PTMT ball cock (20mm) : Providing and fixing PTMT ball cock (20mm)of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P/H.P.H.D plasticball.(for water tank)20mm nominal 125mm long,77mm high and 42mm wide with piston travel of minimum 6.5mm having weight not less than 210gms.(100+40+70)(Body+Rod+Ball) provided with leverage of minimum 310mm and one piece molded H.D plastic ball of 127mm dia.
202	P/F PTMT ball cock (25mm) : Providing and fixing PTMT ball cock (25mm)of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P/H.P.H.D plasticball.(for water tank)25mm nominal size, 155mm long,96mm high and 52mm, wide with piston travel of minimum 8mm, having weight not less than 455gms.(170+85+200) (Body+Rod+ball) Provided with leverage of minimum 390mm and one piece moulded H.D plastic ball of 152mm dia
203	P/F PTMT ball cock (50mm) : Providing and fixing PTMT ball cock (50mm) of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P/H.P.H.D plasticball .(for water tank)50mm nominal size, 245mm long,164mm high and 93mm, wide with piston travel of minimum 16mm, having weight not less than 40gms.(460+290+490) (Body+Rod+ball). Provided with leverage of minimum 710mm and one piece moulded H.D plastic ball of 254mm dia
204	Liquid soap container : Providing and fixing PTMT liquid soap container 109mm wide 125mm high and 112mm distance from wall of standard shape with bracket of the samematerials with fittings of approved quality weighing not less than 125gms
205	Sensor urinal pan : Providing & fixing sensor urinal pan (Size 610 mm x 390 x 370 mm )make Hindware modle No. 80007 or equivelent with all fittings etc. complete as perspecification & direction of MIC
206	Sensor faucat pillar cock : Providing & fixing sensor faucat pillar cock for wash basins with controlled box make of JAQUAR model no.51011 with all fittings as per specificationand direction of MIC
207	Non-pressure RCC pipes : Providing & laying non pressure NP2 class RCC pipes with collar jointed with stiff mixture of cement mortar in the proportion of 1:2 (1Cement:2Sand) including testing of joints for leak proof ness etc complete. Excavation etc will paid in the relevant items. a) 250 mm dia RCC Hume pipe
208	SCI, S/S Pipe - 100mm : Supplying & fixing 100mm dia SCI,S/S pipe. of pipes at any elevation for rain water,waste & vent including fitting the joints with spun yarn, soaked inneat cement slury & cement mortar 1:2 but excluding the cost of pipe fittings(accessories) as per IS 1729
209	SCI Pipe Accessories : Providing & fixing 100mm dia SCI pipe accessories Plain bend (SCI)/shoes/off sets/Heel rest bends,at any elevation jointing with spun yarn soaked incement slurry & cement mortar 1:2 as per IS 1729
210	SCI Pipe Accessories Bend : Providing & fixing 100mm dia SCI Pipe accessories Bend of required degree with access door insertion rubber washer 3mm thick, bolts and nutscomplete at any elevation jointing with spun yarn soaked in cement slurry & cement mortar 1:2 as per IS 1729
211	P/F Single equal junction : Providing & fixing Single equal junction of required degree with access door insertion rubber washer 3mm thick, bolts, nuts complete. SCI (100 X 100 X100)mm junction. pipe accessories at any elevation jointing with spun yarn soaked in cement slurry & cement mortar 1:2 as per IS 1729
212	P/F Double equal junction : Providing & fixing Double equal junction of required degree with access door insertion rubber washer 3mm thick, bolts, nuts complete.SCI (100x100x100x100) mm junction. at any elevation jointing with spun yarn soaked in cement slurry & cement mortar 1:2 as per IS 1729
213	P/F SCI Terminal guard - 100mm : Providing & fixing SCI Terminal guard. 100 mm at any elevation , jointing with spun yarn soaked in cement slurry & cement mortar 1:2 as per IS 1729
214	P/F MS holder - 100mm : Providing & fixing of 100 mm dia pipe MS holder bat clamps with all fittings like nails, plugs etc.
215	P/F CI / AC pipes : Providing & fixing bobins nails with wooden plugs for CI/AC pipes in wall including cutting & making good the wall with CM (1:3). at any elevation.
216	P/F C.l. Brackets : Providing and fixing C.l. brackets to suit at site for cisterns/ wash basin/ sink including grouting in wall with cement concrete(1:2:4) and making the wallgood and including painting of brackets with black anti corresive paint all complete at any elevation
217	L/F SCI/ CI pipe - 50 to 150mm dia : Laying & fixing SCI/CI pipe 50 to 150mm dia. at any elevation with serviceable dismantled materials, jointing with CM(1:1). including all tools, tackles jutes & red oxide etc with all complete
218	L/F Collar bend, junction : Laying & fixing Collar bend, junction at any elevation with serviceable dismantled materials jointing with CM(1:1), including all tools, tackles with allcomplete
219	P/F White plastic seat : Providing & fixing white plastic seat with lid for pedstal type WC panwith CP hinges, rubber buffer etc. complete
220	P/F Covers PVC water tanks : Providing & fixing covers only suitable for PVC water tanks including fixing accessories & locking arrangement etc.complete
221	S/F Rigid PVC ,SWR S/S pipes,Rain water : Supply & fixing of rigid PVC,SWR S/S pipes & rain water application & sanitary pipes 110mm nominal outside dia 6'0\\"(1.8m) long made toIS:13592-1992 either in totally new lines or with the existing CI pipe lines, in case of the latter, solvent cement(PVC liquid) is to be used for the 1st piece] including using required MS clamps, nails, bobins etc. as per the direction of MIC. at any elevation
222	S/F Rigid PVC ,SWR S/S single Tee : Supply & fixing of rigid PVC SWR S/S Single TEE with door 110mm for special rain in water application & sanitary pipes made to IS:13592-1992 eitherin totaly new lines or with the existing CI pipe lines,[in case of the latter, solvent cement (PVC liquid) is to be used for the 1st piece] including using required PVC clamps, nails bobins etc. as per the direction of MIC.
223	S/F Rigid PVC ,SWR S/S Nahani Trap : Supply & fixing of rigid PVC SWR S/S Nahani trap for special rain in water application & sanitary pipes made to IS:13592-1992 either in totaly new lines or with the existing CI pipe lines,[ in case of the latter, solvent cement (PVC liquid)is to be used for the 1st piece] including using required PVC clamps,nails bobins etc. as per the direction of MIC
224	S/F Rigid PVC ,SWR S/S Coupler : Supply & fixing of rigid PVC SWR S/S Coupler 100mm for special rain in water application & sanitary pipes made to IS:13592-1992 either in totaly new lines or with the existing CI pipe lines,[ in case of the latter, solvent cement(PVC liquid) is to be used for the 1st piece] including using required PVC clamps,nails bobins etc. as per the direction of MIC.
225	S/F Rigid PVC ,SWR S/S pipe Connector : Supply & fixing of rigid PVC SWR S/S Pipe connector with lip ring 110mm for special rain in water application & sanitary pipes made to IS:13592-1992 either in totaly new lines or with the existing CI pipe lines,[in case of the latter, solvent cement (PVC liquid) is to be used for the 1st piece] including using required PVC clamps, nails bobins etc. as per the direction of MIC
226	S/F Rigid PVC ,SWR S/S Bend plain : Supply & fixing of rigid PVC SWR S/S Bend plain 110mm for special rain in water application & sanitary pipes made to IS:13592-1992 either in totaly new lines or with the existing CI pipe lines,[ in case of the latter, solvent cement (PVC liquid) is to be used for the 1st piece] including using required PVC clamps, nails bobins etc. as per the direction of MIC.
227	S/F Rigid PVC ,SWR S/S Trap (without air : Supply & fixing of rigid PVC SWR S/S trap (without air vent) 100mm for special rain in water application & sanitary pipes made to IS:13592-1992 either in totaly new lines or with the existing CI pipe lines,[ in case of the latter, solvent cement (PVC liquid) is to be used for the 1st piece] including using required PVC clamps, nails bobins etc. as per the direction of MIC
228	S/F Rigid PVC ,SWR S/S Vent cowl : Supply & fixing of rigid PVC SWR S/S Vent cowl 110mm for special rain in water application & sanitary pipes made to IS:13592-1992 either in totaly new lines or with the existing CI pipe lines,[ in case of the latter, solvent cement (PVC liquid) is to be used for the 1st piece] including using required PVC clamps, nails bobins etc. as per the direction of MIC
229	S/F Rigid PVC ,SWR S/S Vent cowl clip : Supply & fixing of rigid PVC SWR S/S Vent cowl Pipe clip 110mm for special rain in water application & sanitary pipes made to IS:13592-1992 either in totaly new lines or with the existing CI pipe lines,[ in case of the latter, solvent cement (PVC liquid) is to be used for the 1st piece] including using required PVC clamps, nails bobins etc. as per the direction of MIC.
230	S/F Rigid PVC ,SWR S/S Bend with Door : Supply & fixing of rigid PVC SWR S/S Bend with door 110mm for special rain in water application & sanitary pipes made to IS:13592-1992 either in totaly new lines or with the existing CI pipe lines,[ in case of the latter, solvent cement(PVC liquid) is to be used for the 1st piece] including using required PVC clamps, nails bobins etc. as per the direction of MIC.
231	Removing chockage & cleaning of floor : Removing chockage & cleaning of floor trap/ WC 'S' or 'P' trap/ inspection chamber & gully trap& cleaning of pipes upto inspection chamber from trap including refixing the door vent & gratings with all complete.
232	Removing chockage & cleaning of swerage : Removing chockage & cleaning of swerage pipe line depth more than 1.5m from man hole to man hole or IC to MH including disposal of waste materials as directed.(100 to 300mm dia pipe) with all complete.
233	Cleaning of man hole (Depth upto 1.5 m) : Cleaning of man hole chamber depth upto 1.5m & disposal of rubish, waste materials, sludge etc. within a lead of 50m. including all tools, tackles with all complete.
234	Cleaning of man hole ( 1.5m to 3.0m): Cleaning of man hole chamber depth 1.5m to 3.0m & disposal of rubish, waste materials, sludge etc.within a lead of 50m. including all tools, tackles with all complete.
235	Cleaning of man hole ( 3.0m to 4.5m) : Cleaning of man hole chamber depth 1.5m to 3.0m & disposal of rubish, waste materials, sludge etc.within a lead of 50m. including all tools, tackles with all complete.
236	Cleaning of man hole ( 4.5m to 6.0m) : Cleaning of man hole chamber depth 4.50m to 6.0m & more and disposal of rubish, waste materials, sludge etc.within a lead of 50m. including all tools, tackles with all complete.
237	Removal of sludge, water : Removal of sludge, water etc by suitable pumps from the sewerage system/ man holes etc including the deployemnet of pump capacity minimum 3 HP,running the pump with necessary fuel oil, lubricant & operator as per the manual of the manufactures all complete as per instruction of the engineer in charge.
238	Disposal of sludge of swearage: Disposal of sludge of swearage system within distance of 2 Km by hand trolly/tractor trolley a directed by MIC
239	Cleaning of open drain(upto 300mm) : Cleaning of open drain & surface drain bottom width upto 300mm including removal of slush soil,debris deposits of all depths, green vegetation & disposal of earth rubish etc. as directed.
240	Cleaning of open drain(300 to 500mm) : Cleaning of open drain & surface Drain bottom width from 300 to 500mm including removal of slush soil, debris deposits of all depths, green vegitation & disposal of earth rubish etc. as directed.
241	Cleaning of open drain(500mm above) : Cleaning of open drain & surface Drain bottom width 500mm and above including removal of slush soil, debris deposits of all depths, green vegitation & disposal of earth rubish etc. as directed.
242	Cleaning of septic tank : Cleaning of septic tank including removal of deposited sludge, soil & pump out the water etc. & disposal the same to a distance within 2 KM etc. completeby manual means or by engaging mechanical suction pumps mounted on tractors/trucks all complete as per specifications & instruction of the engineer in charge (Measurement shall be taken as per actual volume of water & sludge inside septic tank
243	Cleaning of de-chokeing : Cleaning of de-chokeing, desilting and descaling etc of sewerage pipe line of all dia upto 900 mm. In affected areas ( to be identified by engineerin-charge) and cleaning of sludges /debris/hard material from man hole(approx.420 no.of man holes) within the affected pipelines and any size depth varying from 0.6 mts to 3 mts. by mechanical means using high pressure jet, drilling niddle bit,(of various size and purpose)and suction etc. with all other tools and tackles, labours, materials, machinaries /equipments including disposal of debris/sludge (in hard/liquid state)to designated dumpingarea inside township up to the satisfaction of engineer in-charge inclusive of cost of all taxes
244	Hiring charge of machine : Hiring charge of machine for cleaning of sewer line, removal of chokage, cutting of obstractions such as roots of trees or any foreign materials from the manhole chamber and sewer pipe line in township and CISF complex by mechanical means using high pressure jet mounted with high pressure suction of 1200 bar of 5000 lts. tank filled, drilling niddle bit of various sizes and purpose with all other tools and tackles, labours, materials, machineries including transportation of debris/sludge to designated dumping area inside township. (the machine will be operated 5 hrs. per day)
245	Repair & refixing of PVC/FRP dors, : Repair & refixing of PVC/FRP dors, door frames etc including providing the tower bolts, hinges, screws, replacement of frame pieces, panes up to 10 % of the total length/area and making good the same all inclusive with materials etc complete as per instruction of the engineer in charge.
246	S/F of PVC frames : Supply & fixing of PVC frames made from extruded PVC multi chambered hollow section having diemension of 59x48mm approx. The vertical and after inserting MS tubular rectangular \\"L\\" shaped brack ets of size 100x100mm with mitred out at the corners. The frame shall be fixed to the wall with the help of 3 nos.75mm long and 4mm dia steel scrwes and expandable fastners on each side of the frames complete of a reputed make
247	Supply of PVC door shutter : Supply of PVC door shutter made from extruded PVC stiles having overall thickness of 30mm. The lock rails of size 30x100mm or above and the infillinside the frame work to be provided with panels measuring 20x20mm. The corners of the stiles and rails shall be fixed to each other with matalic rectangular \\"L\\" shaped brackets of size 200x100mm & steel screw including the cost of hand conventional aluminium/PTMT hard wares with aluminium screws & the labour charges for fixing in position complete of reputed make.
248	Welding by electric Arc welding : Welding by electric Arc welding for G.I pipe connection including testing of (length) water tightness.
249	P/A One coat Red oxide Primer : Providing and applying one coat of red oxide primer of approved brand & manufacture over steel work/pipes including scraping & cleaning.
250	P/A Black Anticorrosive bitumastic paint : Providing and applying with black anticorrosive bitumastic paint of approved quality & manufacture. One coat.
251	P/A Synthetic enamel paint-(Two coats) : Providing and applying with synthetic enamel paint of approved brand & manufacture to give an even shade, over steel work & pipes etc. including cleaning the dust, rust, dirt, scales, smoke etc. sand papering, filling up holes and depressions etc. with approved quality putty for wood / steel including necessary scaffolding etc. complete for all heights as per the specification and direction of MIC. Two coats.
252	Clearing of grass : Clearing of grass, vegetation and plants growth on ground or from chajja, roof, over head tank bottom, rain water mouth etc. and removal of rubbish outside the periphery of the area cleared up to a lead of 3.0KM as per the direction of Manager-in-charge.
253	Fixing of FRP door with chowkath : Fixing of FRP door with chowkath in existing opening including chipping if necessary and embedding chowkhats in floors or walls, cutting masonry for hold fasts embedding hold fasts or 6mm dia nut and both of 150mm long to be fixed in cement concrete blocks with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) and making good the damages to wall, floor, plaster as required with all bye works and disposal of rubbish to dumping ground. (Cement free issue)
254	P/F (FRP) Door Frames : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm toreceive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
255	P/F (FRP) Flush Door shutter : 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturatedpolyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters ofF.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge
256	Dismantaling of floor trap from conc. : Dismantaling of floor trap from conc. Floor carefully, cleaning & stacking at site store & disposal of rubish at a designated place as per instruction of the manager in charge
257	Dismentaling of WC pan : Dismentaling of WC pan with 'S' or 'P' trap including cutting breaking of concrete carefully & cleaning, stacking the same at site store including disposal of rubbishes as directed by the M-I-C.
258	Dismantling of CI or AC rain water : Dismantling of CI or AC rain water, vent pipe with fittings & clamps including stacking the useful material at site store (50 to 150mm dia pipe) at any elevation.
259	Dismantling of SW/ RCC pipes : Dismantling of SW/RCC pipes including breaking of joints & bed concrete stacking of useful materials at site store including cleaning but excludingearth work excavation for pipe. all dia.
260	Cutting of concrete floor/ road ( PCC/RC : Cutting of concrete floor/road (PCC/RCC)for dismantling/fixing of pipes of dia up to 100 mm including making good the damages after taking out or laying pipes & disposal of rubbish as directed.
261	Dismantaling of CI brackets from the wal : Dismantaling of CI brackets from the wall & making good the wall including disposal of rubbishes (brackets of wash basin/sink/ cistern)& stacking at store at any elevation.
262	Dismantaling of wash basin/ sink/urinal : Dismantaling of wash basin/sink/urinal pan/ high level,low level or automatic flushing cistern & stacking at store or disposal of debris to identified area within a lead of 2.0KM where ever required etc complete.
263	Dismantaling of bath room mirror : Dismantaling of bath room mirror or towel rail/glass shelf/soap disc or coat hook/toilet paper holder & stacking at store disposal of debris to identified area within a lead of 2.0KM where ever required etc complete.
264	Dismantaling of CP brass pillar tap : Dismantaling of CP brass pillar tap or CP trap/CP waste with pipe of wash basin/sink including all tools, tackles with all complete.
265	Dismentaling of PCC/RCC : Dismentaling of PCC/RCC including disposal of debris to identified area within a lead of 2.0KM as directed including all tools, tackles with all complete.
266	Dismentaling of Brick masonry work. : Dismentaling of Brick masonry work. of any mortar mix disposal of debris to identified area within a lead of 2.0KM including all tools, tackles with all complete.
267	Cutting chase in brick masonary wall : Cutting chase in brick masonary wall for fixing pipes or dismental pipe upto 100mmdia & making good the same with CM(1:4) & disposal of debris to identified area within a lead of 2.0KMincluding all tools, tackles with all complete.
268	Dismantling of G.I/ PVC pipes 15 to 40 m : Dismantling of G.I/PVC pipes 15 to 40 mm nominal bore with fittings including stacking & hand over to site store including the cost of earth work & cutting of wall or floor both internal or external types, disposal of all debris etc, segregation of salvagable &non salvagable materials complete.
269	Dismantling of G.I/ PVC pipes 50 to 100m : Dismantling of G.I/PVC pipes 50 to 100mm nominal bore with fittings including stacking & hand over to site store including the cost of earth work & cutting of wall or floor both internal or external types, disposal of all debris etc, segregation of salvagable & non salvagable materials complete.
270	Cutting of G.I / PVC pipes 15 to 50 mm : Cutting of G.I/PVC pipes 15 to 50 mm dia. by hacksaw for fixing dismantaling & new connection work etc including all tools, tackles with all complete.
271	Cutting of G.I / PVC pipes 50 to 100 mm : Cutting of G.I/PVC pipes 50 to 100 mm dia by hacksaw for fixing dismantaling & new connection work etc including all tools, tackles with all complete.
272	Supply of labours for miscellaneous : Supply of labours for miscellaneous civil works as and when required including all tools and tackles etc. Unskilled/ Semi-skilled/ Skilled as per requirement (Per Manday)
273	Dismantling of inspection chamber : Dismantling of inspection chamber or gully trap chamber of any size and cleaning, stacking of serviceable gully trap including disposal of rubbish, all tools, tackles etc with all complete.
274	Dismantling of concrete flooring/masaic : Dismantling of concrete flooring/masaic flooring including disposal of rubish within a lead of 2km. including all tools, tackles with all complete.
275	Dismantling of old plaster/skirting/dado : Dismantling of old plaster/skirting/dado etc and preparation the surface for further plastering the surface including disposal the rubish within a lead of 2km. all tools, tackles with all complete.
276	Repairing & refixing of Urinal pan/wash : Repairing & refixing of Urinal pan/wash basin/mirror /sink excluding the cost of fittings
277	P/F Auto closing concealed urinal flush : Providing & fixing Auto closing concealed urinal flush Valve of Jaquar make or equivalent, 15 mm nominal bore, 98 mm long foam flow. At the desired Location Including cutting & making good the wall, cost of all labour, required fittings complete as per instruction of the Manager-In-Charge.
278	P/F White vitreous china Oval wash basin : Providing & fixing of white vitreous china Oval wash basin size 550mm X 400mmX200mm of approved make such as (NEYCER/ HINDWARE / PARYWARE) with ISI mark including making connection but excluding the cost of fittings., At the desired Location Including cutting & making good the wall, cost of all labour, required fittings complete as per instruction of the Manager-In-Charge
279	P/F White vetreous china Urinal basin : Providing & fixing white vetreous china urinal basin of size 600x400mmX300mm of approved make such as Jaquar/Hindware /Parryware/ Neycer & colour with I.S.I mark at any elevation.Including cutting & making good the wall, cost of all labour, required fittings complete as per instruction of the Manager-In-Charge.
280	P/F C.P Bib cock with extended lever han : Providing & fixing of C.P Bib cock with extended lever handle and wall flange of 15mm dia of approved brand (Jaquar make) weighing not less than 400 gms with ISI mark medium duty replacing by removing/dismantling of damaged material where ever required. At the desired Location Including cutting & making good the wall, cost of all labour, required fittings complete as per instruction of the Manager-In-Charge
281	P/F C.P long body Bib cock with wall f : Providing & fixing of C.P long body Bib cock with wall flange of 15mm dia of approved brand (Jaquar make) weighing not less than 690 gms with ISI mark medium duty replacing by removing/dismantling of damaged material where ever required. At the desired Location Including cutting & making good the wall, cost of all labour, required fittings complete as per instruction of the Manager-In-Charge
282	Assitance for preparaton of all design,: Assitance for preparation of all design, detail drawings through Autocad, Convergent with all symbols, pattern, nomenclature/Sanitary Inspector etc. of Civil Engineering by engaging one skilled manpower (Minimum qualification Diploma in Civil Engineers
283	P/F liquid soap disenser with glass bott : Providing and fixing liquid soap dispenser with glass bottle of jaquar make or equivalent with necessary fittings etc. Complete as per the instruction of MIC.
284	P/F Sink Cock mounted with angular knob : Providing and fixing Sink Cock mounted with angular knob of jaquar make or equivalent with necessary fittings etc. Complete as per the instruction of MIC.
285	P/F health Faucet with 8mm dia.: Providing and fixing health Faucet with 8mm dia. 1/20 m long flexible tube and wall hook of jaquar make or equivalent with necessary fittings etc.Complete as per the instruction of MIC.
286	P/F two way Bib-cock with flange : Providing and fixing two way Bib-cock with flange of jaquar make or equivalent with necessary fittings etc. Complete as per the instruction of MIC. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Civil Construction Tenders

Plumbing And Sanitary Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair & Maintenance Of Water Supply & Sanitary Work For Cpp, For The Year-2026-2028, Anugul-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair & Maintenance Of Water Supply & Sanitary Work For Cpp, For The Year-2026-2028, Anugul-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us