|
| 1 | Dismantling of posts or struts (wood,steel or RCC) any section, including taking out embedded portion and making good disturbed (Natural ground/ concrete, brick work ) full length of post to be measured complete all as specified and directed by the Engineer in Charge. |
| 2 | Dismantling of chain link fencing wire mesh,any type including barbed wire fencing, folding servicable fencing for reuse complete all as specified and directed by the Engineer in Charge. |
| 3 | Excavation in post holes (or similar holes) each not exc. 0.5 Cubic Metre and getting out, returning filling and ramming earth or broken rubble mixed earth around in layers not exceeding 25cm watering and removing surplus spoil to a distance not exc. 50 m and making good surface in Hard dense soil , complete all as specified and directed by Engineer-in-Charge. |
| 4 | Plain cement concrete (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates as in foundations, filling and mass concrete or in sub base to floor, complete all as specified and directed by the Engineer in Charge. |
| 5 | M&L Cement concrete Type C-2 1:3:6 (40 mm graded aggregate) in foundation,filling and mass concrete for post holes. |
| 6 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by by Engr-in-charge. |
| 7 | M&L Providing, cement concrete type B0 1.2.4 (12.5 mm graded aggregate) plinth courses, string courses lacing courses,, copings, kneelers,kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 8 | S&F steel section, angle iron or core for posts or stuts in fencing and framed work nosing to steps including embeding in concrete and serewing ect. wind ties for roof including securing bolts, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting or reviting etc and similar works confirming to FE-290 Gde E-165 complete all as specified and directed by the Engineer in Charge. |
| 9 | Mild steel screw bolts 16 mm dia of shank factory (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exe. 5cm but n. exc 10 cm long , complete all as specified and as directed by the Engineer-in-Charge. Note-Length of ordinary bolts shall be measured from the underside of the head to the end of shank) |
| 10 | Supply only mild steel galvanised chain link fencing with 50x50mm nominal pitch of wire of size dia 3.00mm to 3.5mm and weight not exceedind 4 Kg per Square Metre , complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | Fixing only chain link fencing including line wires,any mesh, size and type of standred, rails, staining ,bolt, etc , including provision of binding wire , complete all as specified and directed by Engineer-in-ChargeNote:- Supply of chain link and mild steel galvanised line wire shall be measured and paid separately under respective item of this schedule .. |
| 12 | M & L, preparation of new steel surfaces with one coat of Red oxide and two coats of synthetic enamel of ordinary tint on surfaces of any description over 10 cm in width or grith, not otherwise described. |
| 13 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework and precast concrete articles and precast concrete block walling complete all as specified and as directed by by Engr-in-charge. |
| 14 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 15 | M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 16 | S&F Galvanized 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75mm spacings, and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples, or steel pins etc fixed as in complete all as specified (each line of wire to be measured), complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L 10mm dia mid steel round bar for chain link fencing for strainght complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F in repair concertina coil 600mm dia (in streched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips(18SWG) fixed over barbed wire, medium barb, hot dip galvanized steel wire razor wire with angle iron.The concertina coil to be fixed with barbed wire at points wherever coil touches bottom of barbed wire the help of hog rings (14 SWG )including all fitting like fasterener clips, steel lug ring etc complete all as specified and directed. Note-(i) Stretch length of each coil shall be 6 mtr complete all as specified and directed. |
| 19 | Deduct Schedule of credit (Schedule attached with tender docus) Please Enable Macros to View BoQ information |
