|
| 1 | Excavating in post holes each not exc 0.50 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc 25cm and removing surplus soil to a distance not exc 50m and making good surface all as specified`and directed . |
| 2 | Removing excavated material to a distance n. exc 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed. |
| 3 | M&L for plain cement concrete 1:3:6, type C2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed. |
| 4 | S&F structural steel work in tubular trusses including special shaped washer complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 5 | S&F rolled mild steel work as in roof trusses, (framed),, trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290 (Gde E -165) complete all as specified and directed . |
| 6 | S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed . |
| 7 | M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 8 | M&L for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded crushed stone aggregates) as in sub base , finished even and fair complete all as specified and directed. |
| 9 | M&L for 75 mm thick plain cement concrete 1:4:8, type D2 (using 40 mm graded crushed stone aggregates) as in sub base , finished even and fair complete all as specified and directed. |
| 10 | M&L for chequered cement concrete tiles 30cmx30cmx25mm thick, polished with grey cement and no pigment, set , jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies,benching etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed. |
| 12 | M&L for preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying two coat of weather proof exterior emulsion paint over one coat of wall care putty of 1 mm thick and one coat of primer complete all as specified and directed. |
| 13 | Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil complete all as specified and directed. |
| 14 | M&L for providing and laying 60 mm thick factory made charmfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 15 | Excavation in trenches in any type of soil, not exceeding 1.5m deep and 1.5m wide for foundation etc or manholes, piers , shafts etc not exceeding 10 Sqm on plan & not exceeding 1.5m in depth and getting out complete all as specified and directed. |
| 16 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 17 | M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc for rough finished surfaces of concrete complete all as specified and directed. |
| 18 | M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc for rough finished surfaces of concrete complete all as specified and directed. |
| 19 | M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for rough finished surfaces of concrete complete all as specified and directed. |
| 20 | M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed . |
| 21 | M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregates) as in column,pillars, piers and struts complete all as specified and directed. |
| 22 | M&L for Mild steel TMT bars 10 mm dia and over, cut to length bent to shape as required including cranking bending and binding with & including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 23 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia,in stirrups, spacers and binders including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 24 | M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:4 complete all as specified and directed |
| 25 | M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and directed. . |
| 26 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 27 | M&L for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies, 40mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:6 including taking down the existing one complete all as specified and directed. Please Enable Macros to View BoQ information |
