Tender For Repair To Wooden, Steel Furniture And Re-Canning And Polishing Of Chairs And Connected Work At Drde Gwalior Under Ge (I) R&D Delhi, Gwalior-Madhya Pradesh

TDR : 55151660

Tender Notice
BOQ

18 Days Left

Gwalior , Madhya Pradesh

Tender Brief : Tender For Repair To Wooden, Steel Furniture And Re-Canning And Polishing Of Chairs And Connected Work At Drde Gwalior Under Ge (I) R&D Delhi

Document Fees
₹ 300 /-

EMD
₹ 5000.0 /-

Tender Value
₹ 2 Lakhs /-

Submission Date
09-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	M&L for painting of Almirah Steel with shelves (Large) complete with two coats of first quality synthetic enamel paint by spray machine including preparation of old painted surface complete all as specified and as directed to the entire satisfaction of the GE (I) /Engineer-in-Charge. (FD-1031).
2	All as per ser item No 1.00 here in before but Almirah Steel with shelves (Medium) (FD-1032).
3	All as per ser item No 1.00 here in before but Chair CB tubular steel with arms (FD-75(M)).
4	All as per ser item No 1.00 here in before but Chair CB tubular steel without arms (FD-75(M)).
5	All as per ser item No 1.00 here in before but chair varandah including removing old cane and re-canning with 3mm wide cane plastic (FD-259).
6	All as per ser item No 1.00 here in before but table office Officer steel1371mm x 762mm x 762mm.
7	All as per ser item No 1.00 here in before but table office clerk Steel 1220mmx 710mmx760mm.
8	All as per ser item No 1.00 here in before but Rack side 4 spaces.
9	S&F in repair, seats & back of teak wood frames made to shape out of section 40mm wide and 20mm thick for chair CB tubular steel with arms/ without arms duly caned with 2mm wide gola type plastic cane of approved quality and weaving as per Godrej pattern including fitting with machine screw with nuts and washers as required after making through holes including french polishing black to frames of seat after tightening with screw complete all as specified and directed.(FD-75(M)). Note : Seat and back shall be measured separately as one unit.
10	S&F in repair of 1st class teak wood arms rest made to shape for chair CB tubular steel with arms all (as per drawing), fixed with steel screws and washer as required including french polishing black to arm rest complete (FD-75(M)).
11	S&F in repair of locks as per existing pattern to almirah steel large / medium / small complete all as specified and as directed (FD-1031, FD-1032).
12	Taking out of old unserviceable handle of almirah steel large / medium /small and supply and fixing new handle as approved (FD-1031, FD-1032).
13	Taking out old unserviceable GI elbow 3 way from Charpoy GI pipe 32mm bore and S&F new GI elbow 3 way (ISI marked) to existing charpoy GI pipe (FD-220).
14	Taking out old unserviceable GI check nuts from Charpoy GI pipe and S&F new GI check nuts to existing Charpoy GI pipe (FD-220).
15	Taking out old unserviceable MS clamps from Charpoy GI pipe and S&F new clamps made out of 25x3mm flat iron made to shape and welded on the legs of charpoy GI pipe (FD-220).
16	Taking out old torn newar from charpoy GI pipe and supply & fix new ply wood top 2100mmx 900mmx 12mm thick BWR grade, fixed with nut and bolt and washer including making holes in long rails and short rails complete as directed (FD-220).
17	Taking out old unserviceable long rails from Charpoy GI pipe and S&F new long rails made out of 32mm bore GI pipe medium grade (ISI marked) duly threaded at both ends and fixed on the existing Charpoy GI pipe (FD-220).
18	Taking out old unserviceable short rails from Charpoy GI pipe and fixing short rails made out of serviceable portion of long rail obtained from item No 17.00 here in beforeduly threaded at both ends and fixed on the existing Charpoy GI pipe (FD-220).
19	Taking out old unserviceable legs from Charpoy GI pipe and fixing legs made out of serviceable portion of short rail obtained from item No 18.00 here in beforeduly threaded at one end and fixing MS plate 3mm thick at the bottom, MS clamps two Each shall be welded to the legs (FD-220).
20	Supply and welding stiffeners made out of 3 foot long 25mm square pipe medium grade, welded to the existing Charpoy to support the ply wood top all as directed. (FD-220).
21	M&L for replacing the existing old tapestry cloth from Chair Revolving low back steel (seat & back) and fixing new tapestry cloth (not less than Rs 200/- per m) complete all as specified and as directed (TP).
22	S&F in repair wheel of chair revolving low back steel (TP).
23	All as per item No 22.00 here in before but handle (TP).
24	All as per item No 22.00 here in before but base (TP).
25	All as per item No 22.00 here in before but hydraulic system (TP).
26	Removing existing unserviceable plywood top grade BWR from bed plywood top and supply & fixing new 1800mmx900mmx12mm thick plywood top BWR grade all as specified and as shown on drawing (FD-246).
27	Removing existing unserviceable long rails of bed plywood and supply & fixing new long rails made out of well seasoned 1st class timber teak into shape & size & fixed on the existing frame of bed plywood top all as specified & as shown on drawing (FD-246).
28	All as per item No. 27.00 here in before but short rails(FD-246).
29	Removing old unserviceable top of table writing (1200mmx590mm) and supply & fix new top made out of 18/19mm thick pre-laminated particle board interior grade one side teak veneered and other side having balancing white lamination including 19x4mm teakwood beading all around the top all as specified & as shown on drawing (FD-275).
30	Removing old unserviceable top of table office officer (1220mmx710mm) and supply & fix new top made out of 18/19mm thick pre-laminated particle board interior grade one side teak veneered and other side having balancing white lamination including 19x4mm teakwood beading all around the top all as specified & as shown on drawing (FD-275).
31	Removing old torn cane plastic from chair dinning & recaning the same with 2mm wide white plastic cane half round oval shaped & beading with 3mm wide plastic cane half round. Canning shall be as per Godrej pattern all as specified & as shown on drawing (FD-279).
32	Polishing to all exposed wooden surface of Chair Dining with French polish (to the entire satisfaction of Engineer-in-Charge subject to minimum two coats) after removing old stains with scrapping, dirt complete all as directed (FD-279).
33	All as per ser item No 32.00 here in before but Chair writing (FD-280).
34	All as per ser item No 32.00 here in before but Table Writing (FD-249).
35	All as per ser item No 32.00 here in before but Bed Plywood top (FD-246).
36	All as per ser item No 32.00 here in before but 5 Seat Sofa.
37	All as per ser item No 32.00 here in before but Table Dining 6/8 Pers (FD-239 & 273).
38	M&L for replacing the existing old tapestry cloth and foam from Chair dinnig and fixing new tapestry cloth (not less than Rs 200/- per m) and foam coshion 50mm thich 40 density complete all as specified and as directed (TP). Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Madhya Pradesh Tenders

Furniture Tenders

Furniture Items Tenders

Steel Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair To Wooden, Steel Furniture And Re-Canning And Polishing Of Chairs And Connected Work At Drde Gwalior Under Ge (I) R&D Delhi, Gwalior-Madhya Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	M&L for painting of Almirah Steel with shelves (Large) complete with two coats of first quality synthetic enamel paint by spray machine including preparation of old painted surface complete all as specified and as directed to the entire satisfaction of the GE (I) /Engineer-in-Charge. (FD-1031).
2	All as per ser item No 1.00 here in before but Almirah Steel with shelves (Medium) (FD-1032).
3	All as per ser item No 1.00 here in before but Chair CB tubular steel with arms (FD-75(M)).
4	All as per ser item No 1.00 here in before but Chair CB tubular steel without arms (FD-75(M)).
5	All as per ser item No 1.00 here in before but chair varandah including removing old cane and re-canning with 3mm wide cane plastic (FD-259).
6	All as per ser item No 1.00 here in before but table office Officer steel1371mm x 762mm x 762mm.
7	All as per ser item No 1.00 here in before but table office clerk Steel 1220mmx 710mmx760mm.
8	All as per ser item No 1.00 here in before but Rack side 4 spaces.
9	S&F in repair, seats & back of teak wood frames made to shape out of section 40mm wide and 20mm thick for chair CB tubular steel with arms/ without arms duly caned with 2mm wide gola type plastic cane of approved quality and weaving as per Godrej pattern including fitting with machine screw with nuts and washers as required after making through holes including french polishing black to frames of seat after tightening with screw complete all as specified and directed.(FD-75(M)). Note : Seat and back shall be measured separately as one unit.
10	S&F in repair of 1st class teak wood arms rest made to shape for chair CB tubular steel with arms all (as per drawing), fixed with steel screws and washer as required including french polishing black to arm rest complete (FD-75(M)).
11	S&F in repair of locks as per existing pattern to almirah steel large / medium / small complete all as specified and as directed (FD-1031, FD-1032).
12	Taking out of old unserviceable handle of almirah steel large / medium /small and supply and fixing new handle as approved (FD-1031, FD-1032).
13	Taking out old unserviceable GI elbow 3 way from Charpoy GI pipe 32mm bore and S&F new GI elbow 3 way (ISI marked) to existing charpoy GI pipe (FD-220).
14	Taking out old unserviceable GI check nuts from Charpoy GI pipe and S&F new GI check nuts to existing Charpoy GI pipe (FD-220).
15	Taking out old unserviceable MS clamps from Charpoy GI pipe and S&F new clamps made out of 25x3mm flat iron made to shape and welded on the legs of charpoy GI pipe (FD-220).
16	Taking out old torn newar from charpoy GI pipe and supply & fix new ply wood top 2100mmx 900mmx 12mm thick BWR grade, fixed with nut and bolt and washer including making holes in long rails and short rails complete as directed (FD-220).
17	Taking out old unserviceable long rails from Charpoy GI pipe and S&F new long rails made out of 32mm bore GI pipe medium grade (ISI marked) duly threaded at both ends and fixed on the existing Charpoy GI pipe (FD-220).
18	Taking out old unserviceable short rails from Charpoy GI pipe and fixing short rails made out of serviceable portion of long rail obtained from item No 17.00 here in beforeduly threaded at both ends and fixed on the existing Charpoy GI pipe (FD-220).
19	Taking out old unserviceable legs from Charpoy GI pipe and fixing legs made out of serviceable portion of short rail obtained from item No 18.00 here in beforeduly threaded at one end and fixing MS plate 3mm thick at the bottom, MS clamps two Each shall be welded to the legs (FD-220).
20	Supply and welding stiffeners made out of 3 foot long 25mm square pipe medium grade, welded to the existing Charpoy to support the ply wood top all as directed. (FD-220).
21	M&L for replacing the existing old tapestry cloth from Chair Revolving low back steel (seat & back) and fixing new tapestry cloth (not less than Rs 200/- per m) complete all as specified and as directed (TP).
22	S&F in repair wheel of chair revolving low back steel (TP).
23	All as per item No 22.00 here in before but handle (TP).
24	All as per item No 22.00 here in before but base (TP).
25	All as per item No 22.00 here in before but hydraulic system (TP).
26	Removing existing unserviceable plywood top grade BWR from bed plywood top and supply & fixing new 1800mmx900mmx12mm thick plywood top BWR grade all as specified and as shown on drawing (FD-246).
27	Removing existing unserviceable long rails of bed plywood and supply & fixing new long rails made out of well seasoned 1st class timber teak into shape & size & fixed on the existing frame of bed plywood top all as specified & as shown on drawing (FD-246).
28	All as per item No. 27.00 here in before but short rails(FD-246).
29	Removing old unserviceable top of table writing (1200mmx590mm) and supply & fix new top made out of 18/19mm thick pre-laminated particle board interior grade one side teak veneered and other side having balancing white lamination including 19x4mm teakwood beading all around the top all as specified & as shown on drawing (FD-275).
30	Removing old unserviceable top of table office officer (1220mmx710mm) and supply & fix new top made out of 18/19mm thick pre-laminated particle board interior grade one side teak veneered and other side having balancing white lamination including 19x4mm teakwood beading all around the top all as specified & as shown on drawing (FD-275).
31	Removing old torn cane plastic from chair dinning & recaning the same with 2mm wide white plastic cane half round oval shaped & beading with 3mm wide plastic cane half round. Canning shall be as per Godrej pattern all as specified & as shown on drawing (FD-279).
32	Polishing to all exposed wooden surface of Chair Dining with French polish (to the entire satisfaction of Engineer-in-Charge subject to minimum two coats) after removing old stains with scrapping, dirt complete all as directed (FD-279).
33	All as per ser item No 32.00 here in before but Chair writing (FD-280).
34	All as per ser item No 32.00 here in before but Table Writing (FD-249).
35	All as per ser item No 32.00 here in before but Bed Plywood top (FD-246).
36	All as per ser item No 32.00 here in before but 5 Seat Sofa.
37	All as per ser item No 32.00 here in before but Table Dining 6/8 Pers (FD-239 & 273).
38	M&L for replacing the existing old tapestry cloth and foam from Chair dinnig and fixing new tapestry cloth (not less than Rs 200/- per m) and foam coshion 50mm thich 40 density complete all as specified and as directed (TP). Please Enable Macros to View BoQ information

Tender For Repair To Wooden, Steel Furniture And Re-Canning And Polishing Of Chairs And Connected Work At Drde Gwalior Under Ge (I) R&D Delhi, Gwalior-Madhya Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us