|
| 1 | Providing and fixing wood work in poplar wood in Vertical posts ,plates etc wherever required or like components including Hoisting and fixing of all Material complete job |
| 2 | Providing and fixing 4mm thick decorative plywood ( one side finished veneer) conforming to IS : 1328 , including all carriages upto site of work. |
| 3 | 12 mm thick Marine plywood conforming to IS: 710 |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners including)Second class kail wood - |
| 5 | Providing and fixing glazed shutters(35mm) for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws ( Second class Kail wood ) |
| 6 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 7 | Plain particle board flat pressed, 3 layer or graded wood particle boardmedium density Grade I, IS : 3087 marked |
| 8 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 9 | Painting on G.S sheets( Roof) with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer and including repairing of holes , cracks or leakages in existing sheets with waterproof putty/ metal sealant complete but excluding a coat of mordant solution. |
| 10 | Dismantling of existing CGI sheet Covering by engaging Labours, including proper Stacking at SASB Store Chandanwar |
| 11 | Providing and laying in position cement concrete ofspecified grade including curing but excluding the cost ofcentering and shuttering. All work upto plinth level with:1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate20 mm nominal size) ( path) incl all carriages. |
| 12 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 13 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock( |
| 14 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction ofEngineer(25mm) |
| 15 | Providing and fixing 15mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS 8931 |
| 16 | Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore |
| 17 | Providing and fixing electrical points all complete job |
| 18 | Carriage of all Key Construction materials( cement , cgi sheets etc) from market to site of work Please Enable Macros to View BoQ information |
