Tender For Construction Of Rajiv Gandhi Govt. Model Day Boarding School At Amlehar (Phase-Ii) Tehsil Nadaun Distt. Hamirpur (Hp) Sh:- Construction Of Building Portion, Ws & Si, Boundary Wall, Approach Road Etcetera). (Phase-Ii)(Deposit Work) Estimate
Tender Overview
Project Description
Tender for Construction Of Rajiv Gandhi Govt. Model Day Boarding School At Amlehar (Phase-Ii) Tehsil Nadaun Distt. Hamirpur (Hp) Sh:- Construction Of Building Portion, Ws & Si, Boundary Wall, Approach Road Etcetera). (Phase-Ii)(Deposit Work) Estimated Cost:-Rs. 216961329.00 Earnest Money:- Rs. 3169700.00 Time Limit:- Eighteen Months Cost Of Tender Form: 30000/-
BOQ
| Sl. No. | Item Description |
| 1 | Cutting in earth work by mechanical means in all heights and depths in blasting work in hard rock with chiseling and wedging out of rock ( where blasting work is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting of the required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site( to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transportion including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools , equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent . Any loss to the public and private property, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations excetra in layers in all depth, consolidating each deposited layer by ramming and watering, lead up to all lead and lifts as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 3 | Extra for every additional lift of up to all depth or part thereof in excavation / banking excavated or stacked materials all kinds of soil as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 4 | Supplying chemical emulsion in sealed containers including delivery as specified Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (twenty percent) as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 5 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm(seven point five litres per square metre) of the vertical surface of the substructure to a depth of 300mm(three hundred millimetre) including excavation channel along the wall and rodding etcetera complete with Chlorpyriphos/ Lindane E.C. 20% (twenty percent) with 1%(one percent) concentration as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts . The rates are inclusive octroi, royality,Malkana, toll tax, GST or other taxes imposed by the Government. |
| 6 | Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emul- sion @ one litre per hole, 300 mm(three hundred millimetre) apart including drilling 12 mm(twelve millimetre) diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos/Lindane E.C. 20% (twenty percent) with 1%(one percent) concentration as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 7 | Providing and laying cement concrete 1:4:8 (one cement : four sand : eight graded crushed/broken stone aggregate 40 mm (forty millimetre nominal size) mechanically mixed and vibrated on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work in open foundation complete as per direction of Engineer-in- Charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . |
| 8 | Providing and laying cement concrete 1:5:10 mechanically mixed (one cement : Five sand : ten graded crushed / broken stone aggregate 40mm (forty millimetre nominal size) and curing complete including the cost of form work with M.S plates for plain concrete on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths. In retaining walls / breast walls and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. . |
| 9 | Making plinth protection 50mm(fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm(twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm(forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling, dressing and finishing the top smooth including entire carriage of material in all leads and lifts and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 10 | Extra for addition of synthetic Polyester triangular fibre of length 12mm ( twelve millimetre), effective diameter 10-40 (ten-forty) microns and specific gravity of 1.34 (one point thirty four) to 1.40 (one point forty) in cement concrete / RCC / Flooring / water retaining structures by using 125gms (one hundred twenty five gram) of synthetic Polyester triangular fibre for 50 Kg (fifty kilogram) cement used as per directions of Engineer-in-Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. . |
| 11 | Centering and shuttering including strutting, propping etcetera and removal of form work for Foundations, footings, bases for columns including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 12 | Centering and shuttering including strutting, propping etcetera and removal of form for walls (any thickness) including attached pilasters, butteresses, plinth and string courses etcetera including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 13 | Centering and shuttering including strutting, propping etcetera and removal of form work for Suspended floors, roofs, landings, balconies and access platform including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 14 | Centering and shuttering including strutting, propping etcetera and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 15 | Centering and shuttering including strutting, propping etcetera and removal of form work for Columns, piers, abutments, pillars, posts and struts including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 16 | Centering and shuttering including strutting, propping etcetera and removal of form for stairs, (excluding landings) except spiral-staircases including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 17 | Centering and shuttering including strutting, propping etcetera and removal of form for edges of slabs and breaks in floors and walls under 20 cm (twenty centimetre) wide including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 18 | Centering and shuttering including strutting, propping etcetera and removal of form for cornices and mouldings including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 19 | Extra for additional height in centering,shuttering where ever required with adequate bracing, propping etcetera including cost of de-shuttering and decentering at all levels,over a height of 3.5m (three point five metre), for every addition all height of 1 metre (one metre) or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 20 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER/ Shyam steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 21 | Providing and filling in position, blown bitumen in expansion joints as per directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 22 | Providing and filling in position bitumen mix filler of proportion 80 kg. (eighty kilogram) of hot bitumen, 1 kg. (one kilogram) of cement and 0.25 (zero point twenty five) cubic metre of coarse sand for expansion joints as per directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 23 | Providing and fixing in position 12mm (twelve millimetre) thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints as per directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax,GST or other taxes imposed by the Government. . |
| 24 | Providing and fixing sheet covering over expansion joints with iron screws as per design aluminium fluted strips 3.15 mm (three point fifteen millimetre) thick 150 mm (one hundred fifty millimetre) wide as per directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 25 | Add for plaster drip course/ groove in plastered surface or moulding to reinforced cement concrete projections complete as per directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 26 | Providing and laying in position machine batched and machine mixed design mix M-30 (M-thirty) grade cement concrete for reinforced with mimimum cement content not less than of 400Kg ( four hundred kilogram) per cubic metre using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability all works upto plinth level as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 27 | Providing and laying in position machine batched and machine mixed design mix M-30 (M-thirty) grade cement concrete for reinforced with mimimum cement content not less than of 400Kg ( four hundred kilogram) per cubic metre using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability all works above plinth level upto all floor level as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 28 | Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class designation 7.5 (seven point five) in foundation and plinth in cement mortar 1:6 (one cement : six coarse sand) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 29 | Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class designation 7.5 (seven point five) in superstructure above plinth level up to all floor level in all shapes and sizes in cement mortar 1:6 (one cement : six coarse sand) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 30 | Brick work in plain arches in superstructure above plinth level and upto all floor level including centering and shuttering complete for span up to 6 (six) metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in cement mortar 1:3 (one cement : three coarse sand) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 31 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to all floor level in cement mortar 1:4 (one cement :four coarse sand) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 32 | Extra for providing and placing in position 2 Nos (two numbers) 6mm (six millimetre) dia. M.S. bars at every third course of half brick masonry as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 33 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete at all levels granite of any colour and shade area of slab upto 0.50 sqm (zero point fifty square metre) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 34 | Providing and fixing 18 mm (eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete at all levels granite of any colour and shade area of slab over 0.50 sqm (zero point fifty square metre) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 35 | Providing edge moulding to 18 mm (eighteen millimetre) thick marble stone counters, Vanities etcetera , including machine polishing to edge to give high gloss finish etcetera charge marble work complete as per design approved by Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 36 | Providing edge moulding to 18 mm (eighteen millimetre) thick marble stone counters, Vanities etcetera, including machine polishing to edge to give high gloss finish etcetera complete granite work as per design approved by Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 37 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm (one hundred fifty millimetre) with epoxy resin based adhesive, including cleaning etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 38 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etcetera including moulding, rubbing and polishing of cut edges complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 39 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm (seventy five into fifty centimetre) deep and 1.80 cm (one point eighty centimetre) thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 6 mm (six millimetre) nominal size) as per direction of Engineer-in-charge and finished smooth granite Stone of approved shade including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 40 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length second class teak wood as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 41 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length kiln seasoned and chemically treated hollock wood as per direction of Engineer-in-charge including entire carriage of material in all leads and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 42 | Providing and fixing 35 mm (thirty five millimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 43 | Providing and fixing 1.00 mm ( one millimetre) thick decorative high pressure Laminated Sheet of Greenlam/ Century ply / Kit ply make plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 44 | Extra for providing lipping with 2nd (second) class teak wood battens 25 mm (twenty five millimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) of approved quality as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 45 | Extra for providing vision panel not exceeding 0.1sqm (zero point one square metre) in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) rectangular or square as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 46 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 47 | Providing and fixing 50x12 mm (fifty into twelve millimetre) wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etcetera complete 2nd (second) class teak wood as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 48 | Providing 40x5 mm ( forty into five millimetre) flat iron hold fast 40 cm (forty centimetre) long including fixing to frame with 10 mm (ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm (twenty millimetre) nominal size) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 49 | Providing and fixing 250x10 mm ( two hundred fifty into ten millimetre) bright finished brass tower bolts (barrel type) with necessary screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 50 | Providing and fixing 200x10 mm ( two hundred into ten millimetre) bright finished brass tower bolts (barrel type) with necessary screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 51 | Providing and fixing bright finished brass 100 mm (one hundred millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles of approved quality with necessary screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 52 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg (thirty six kilogram) to 80 kg (eighty kilogram) and door width from 701 mm (seven hundred one millimetre) to 1000 mm (one thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 53 | Providing and fixing 150X10mm(one hundred fifty into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing 100X10mm(one hundred into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 55 | Providing and fixing frame work for partitions/ wall lining etcetra made of 50x50x1.6 mm (fifty into fifty into one point six millimetre) hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm (sixty centimetre) centre to centre both ways (vertically and horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm (eight millimetre) dia, 75 mm (seventy five millimetre) long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etcetera, including providing with two coats of approved steel primer etcetera complete, all as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 56 | Structural steel work in single section (TATA/SAIL/Apollo/JSW Make ), fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 57 | Structural steel work riveted, bolted or welded in built up sections (TATA/SAIL/Apollo/JSW Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 58 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (twenty into ten into two millimetre) and braced with flat iron diagonals 20x5 mm(twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6 mm(forty into forty into six millimetre), with 40 mm (forty millimetre)dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 59 | Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ), framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required in stringers, treads, landings etcetera of stair cases, including use of chequered plate wherever required, all complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 60 | Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ), framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 61 | Kota stone slab flooring over 20 mm (twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (one cement : four coarse sand) 25 mm (twenty five millimetre) thick as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 62 | Kota stone slabs 20 mm (twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 63 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (three hundred into three hundred millimetre) or more (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade of 1st (first) quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one cement: four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera, complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 64 | Providing and fixing 1st quality rectified ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 65 | Providing and laying 600x600 mm (six hundred into six hundred millimetre) vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera, complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 66 | Providing and laying 600x600 mm (six hundred into six hundred millimetre) Vitrified tiles in different sizes (thickness to be specified by manufacturer) of RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 67 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm(eighteen millimetre) thick stone slab over 20 mm(twenty millimetre) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent all complete as specified as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 68 | Providing and laying design mix cement concrete of M 30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm(forty millimetre) nominal size in appropriate proportions as per approved and specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction and longitudinal joints (10 mm (ten millimetre) wide x 50 mm(fifty millimetre) deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 69 | Providing and fixing 12 mm (twelve millimetre ) thick cement fiber board as per IS: 14862 plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etcetera complete (frame work to be paid seperatately) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 70 | Providing and fixing 12.5 mm(twelve point five millimetre) thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm(one hundred twenty grams per square metre) (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm(twenty five millimetre) wide x 1.6 mm (one point six millimetre) thick with flanges of 27 mm(twenty seven millimetre) and 37mm(thirty seven millimetre), at 1200 mm (one thousand two hundred millimetre) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia(twelve point five millimetre dia into fifty millimetre long with six millimetre dia) bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm(twenty into ten into zero point five zero millimetre) of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm(forty five into fifteen into zero point nine millimetre) running at the spacing of 1200 mm (one thousand two hundred millimetre) centre to centre, to which the ceiling section 0.5 mm (zero point five millimetre) thick bottom wedge of 80 mm (eighty millimetre) with tapered flanges of 26 mm(twenty six millimetre) each having lips of 10.5 mm (ten point five millimetre), at 450 mm (four hundred fifty millimetre) centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm(two point sixty four millimetre dia into two hundred thirty millimetre) long G.I. wire at every junction, including fixing perimeter channels 0.5 mm(zero point five millimetre) thick 27 mm (twenty seven millimetre) high having flanges of 20 mm(twenty millimetre) and 30 mm(thirty millimetre) long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm (four hundred fifty millimetre) centre, with 25mm (twenty five millimetre) long dry wall screws @ 230 mm (two hundred thirty millimetre) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm(three point five into twenty five millimetre) at 230 mm (two hundred thirty millimetre) center to center including jointing and finishing to a flush finish of tapered and square edges of the board with ecommended jointing compound , jointing tapes , finishing with jointing compound in 3(three) layers covering upto 150 mm(one hundred fifty millimetre) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and ther incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 71 | Providing and Fixing of Metal Galvanized Steel Plain metal ceiling System consisting of 600x600mm(six hundred into six hundred millimetre ) tiles of galvanized steel in 0.5 mm(zero point five millimetre) thickness in powder coated Global White color of 60-80 (sixty to eighty ) microns painted to a minimum of 120 gms (one hundred twenty gramms) (both sides combined) galvanizing to be laid on grid systems with 15mm(fifteen millimetre) wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm(one thousand two hundred millimetre and six hundred millimetre) Cross Tees.The tiles shall be in module size of 600 X 600/ 600x 1200/ 300 x 1200 mm(six hundred into six hundred oblique six hundred into one thousand two hundred oblique three hundred into one thousand two hundred millimetre) , suitable for Green Building application, with Recycled content of 25%(twenty five percent). The grid should be of 15mm(fifteen millimetre) wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm(one thousand two hundred millimetre and six hundred millimetre) Cross Tees with a web height of 38mm(thirty eight millimetre) and a load carrying capacity of 15.43 Kg/M(fifteen point forty three kilogrammes per metre). The T Sections have a Galvanizing of 90 (ninety) grams per M2 having pull out strength of 100 Kgs(one hundred kilogram). The Tile and Grid system used together should carry a 10(ten) year warrantee. IINSTALLATION: To comprise main runner spaced at 1200mm(one thousand two hundred millimetre) centers securely fixed to the structural soffit using GI angles of 25x25x0.5/0.6mm(twenty five into twenty five into zero point five oblique zero point six millimetre) or M8 threaded rods at 1200mm (one thousand two hundred millimetre) maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm(four hundred fifty millimetre) from the adjacent wall. Flush fitting 1200mm(one thousand two hundred millimetre) long cross tees to be interlocked between main runners at 600mm (six hundred millimetre) centre to form 1200 x 600 mm ((one thousand two hundred into six hundred millimetre) module. Cut cross tees longer than 600mm(six hundred millimetre) require independent support. 600 x 600mm(six hundred into six hundred millimetre) module to be formed by fitting 600mm (six hundred millimetre) long flush fitting cross tees centrally between the 1200 mm(one thousand two hundred millimetre) cross tees. The tile is engaged on the exposed grid system. Perimeter trim to be wall angles of size 3000x19x15mm(three thousand into ninteen into fifteen millimetre), secured to walls at 450 mm(four hundred fifty millimetre) maximum centers. as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 72 | Providing and laying 12 mm (twelve millimetre) cement plaster of mix 1:4 (one cement: four coarse sand) upto all floor level as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 73 | Providing and laying 12 mm (twelve millimetre) cement plaster of mix 1:6 (one cement: six coarse sand) upto all floor level as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 74 | Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:4 (one cement : four course sand) upto all floors levels including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 75 | Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 (one cement : Six course sand) upto all floors levels including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 76 | 18 mm (eighteen millimetre) cement plaster in two coats under layer 12 mm (twelve millimetre) thick cement plaster 1:5 (one cement : five coarse sand) finished with a top layer 6 mm (six millimetre) thick cement plaster 1:6 (one cement : six fine sand) upto all floor level including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 77 | Providing and laying 6 mm (six millimetre) cement plaster of mix 1:3 (one cement : thre fine sand) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 78 | Providing and applying plaster of paris putty of 2 mm (two millimetre) thickness over plastered surface to prepare the surface even and smooth complete upto all floor level including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 79 | Distempering with Oil Bound Washable Distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer of ASIAN/NEROLAC/ICI-DULUX complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 80 | Finishing walls with textured exterior paint of required shade new work (Two or more coats applied @ 3.28 ltr/10 sqm) (three point twenty eight liter per ten square metre) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (two point twenty kilogram per ten square metre) (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 81 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm(one point sixty sevsen litre per ten square metre) over and including priming coat of exterior primer (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) applied @ 2.20 kg/10 sqm)(two point twenty kilogram per ten square metre) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 82 | Finishing walls with 100%(Hundred percent) Premium acrylic emulsion paint having VOC less than 50(fifty) gram/litre and UV resistance as per IS 15489:2004(indian standard fifteen thousand four hundred eighty nine : two thousand four), Alkali and fungal resistance, dirt resistance exterior paint (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninety litre per ten square metre) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 83 | Applying priming coat with ready mixed pink or Grey primer of (ASAIN/NEROLAC/ICI-DULUX ) approved brand and manufacture on wood work (hard and soft wood) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 84 | Applying priming coat with ready mixed red oxide zinc chromate primer (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture on steel galvanised iron/ steel works as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 85 | Painting with synthetic enamel paint (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 86 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections (JINDAL/HINDALCO/BALCO) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) for fixed portion polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (Fifty) micron) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 87 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections (JINDAL/HINDALCO/BALCO) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (Fifty) micron) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 88 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket (JINDAL/HINDALCO /BALCO) etcetera complete as per the architectural drawings and the directions of engineer-in-charge with float glass panes of 5 mm (five millimetre) thickness (weight not less than 12.50 kg/ sqm (twelve point fifty kilogram per square metre) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 89 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket (JINDAL/HINDALCO/ BALCO) etc. complete as per the architectural drawings and the directions of engineer-in-charge with float glass panes of 8 mm (eight millimetre) thickness (weight not less than 20.00 kg/ sqm (twenty kilogram per square metre) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 90 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg (one hundred twenty five kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete as per the direction of Engineer-in-charge with brass cover plate minimum 1.25 mm (one point twenty five millimetre) thickness including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 91 | Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete upto 5mm (five millimetre) depth and 5 mm (five millimetre) width including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 92 | Providing and fixing 255 X 19 mm (two hundred fifty five into nineteen millimetre) stainless steel (SS 304 (three hundred four) grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etcetera to the side hung windows as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 93 | Providing and fixing 355 X 19 mm (three hundred fifty five into nineteen millimetre) stainless steel (SS 304 (three hundred four) grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etcetera to the side hung windows as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 94 | Providing and fixing 510 X 19 mm (five hundred ten into nineteen millimetre) stainless steel (SS 304 (three hundred four ) grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etcetera to the side hung windows as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 95 | Providing and fixing Polyester powder coated minimum thickness 50(fifty) micron aluminium tubular handle bar complete aluminium tubular handle bar 32 mm(thirty two millimetre) outer dia, 3.0 mm(three point zero millimetre) thick & 2100 mm(two thousand one hundred millimetre) long with SS screws etcetera Polyester powder coated minimum thickness 50(fifty) micron aluminium tubular handle bar complete as per direction of Engineer-in Charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. . |
| 96 | Providing and fixing Brass 100mm (one hunded millimetre) mortice latch and lock with 6 (six) levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etcetera complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 97 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etcetera complete polyester powder coated minimum thickness 50 (fifty) micron aluminium as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 98 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of Ist course of applying cement slurry @ 4.4 kg/sqm (four point four kilogram per square metre) mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface, IInd course of 20 mm (twenty millimetre) cement plaster 1:3 (one cement : three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface, IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg./sqm (one point seven kilogram per square metre) of area, IVth course of 400 (four hundred ) micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm (one hundred millimetre) wide and pasted to each other with bitumen @ 1.7 kg/sqm (one point seven kilogram per square metre) as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 99 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etcetera consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm (two point seventy five kilogram per square metre) of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm (three hundred millimetre) height including cleaning the surface before treatment and laying integral cement based treatment for (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm(twenty five millimetre to one hundred fifteen millimetre) size with 50% (fifty percent) of cement mortar 1:5 (one cement : five coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm(twenty millimetre) thick layer of cement mortar of mix 1:5 (one cement :five coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm(three hundred millimetre) height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm(two point seventy five kilogramme per square metre) of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge. (d) Finishing the surface with 20 mm(twenty millimetrre) thick jointless cement mortar of mix 1:4 (one cement :four coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm(three hundred into three hundred millimetre) square 3 mm(three millimetre) deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in Charge : With average thickness of 120 mm(one hundred twenty millimetre) and minimum thickness at khurra as 65 mm(sixty five millimetre). as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 100 | Providing and fixing 24 gauge x 19 mm (twenty four gauge into nineteen millimetre) size galvanized chicken wire mesh to junctions of concrete and masonary work and other locations where called for including cutting to required sizes side laps of minimum 75 mm (seventy five millimetre) and fixing in position with necessary clips and U shaped glavanised wire nail etcetera complete as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 101 | Providing and fixing metal shingle of approved make and colour roofing sheet fixing over exising 12 mm (twelve millimetre) thick Cement fiber board and MS frame with ridge of approved thickness J or L hooks, bolts and nuts 6mm ( six millimetre) dia metre with prepainted limpet and rubber washers accessories etcetera all complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 102 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete thickness of glass as per technical specifications and fix to wooden cleats/rawl plug with C.P. brass/SS studs screws and washers etcetera (Modi Guard/Atul/Cera make) as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 103 | Providing and fixing 60mm(sixty millimetre) thick coloured pavement tiles / as per approved manufacturer with required fine sand under tiles and cement concrete 1:2:4 ( one Cement : two Coarse sand :four graded stone aggregate ) on edge of pavement tiles complete in all respect as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 104 | Providing and fixing Natural Cobbled Stone ( 100 x 100 x 25mm thick )(one hundred into one hundred into twenty five millimetre ) thick Flooring with 25 mm(twenty five millimetre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with white cement slurry admixed with pigment of matching shade of stone including curing etcetera all complete as specified and as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 105 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm(thirty centimetre) measured at a height of 1.00 mtr. (one metre) above ground level and removal of rubbish up to a distance of 50 mtr. (fifty metre) outside the periphery of the area cleared as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 106 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 107 | Fencing with R.C.C. post placed at required distance, With G.I. barbed wire embedded in cement concrete blocks, every 15th (fifteen) post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg (nine point three eight kilogram) per 100(hundred) metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm(six millimetre) bar nibs fixed while casting the post. Payment to be made per metre cost of total length of barbed wire used as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 108 | Preparation and consolidation of sub grade with power road roller of 8 to 12 (Eight to twelve) tonne capacity after excavating earth to an average of 22.5 cm (Twenty two point five centimetre) depth, dressing to camber and consolidating with road roller including making good the undulations etcetra and re-rolling the sub grade and disposal of surplus earth with upto all leads including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 109 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% (ninety five percent) of the maximum dry density (proctor density) as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 110 | Providing and fixing in position pre-moulded joint filler in expansion joints. as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 111 | Providing and laying Using grade ‘A’ sealing compound in position bitumen hot sealing compound for expansion joints etcetera as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 112 | Providing and applying 2.5 mm (Two point five millimetre) thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. |
| 113 | Providing, laying and making kerb channel 30 cm(thirty centimetre) wide and 50 mm(fifty millimetre) thick with cement concrete 1:3:6 (one cement: three coarse sand: six graded stone aggregate 20 mm (twenty millimetre) nominal size) over 75mm(seventy five millimetre) bed of dry brick ballast 40 mm(forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etcetera complete and as per direction of Engineer-in charge including all incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. |
| 114 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (one cement: three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etcetera Precast C.C. kerb stone shall be approved by Engineer-in-charge including all incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. |
| 115 | Construction of granular sub base by providing well graded material mixing in a mechanical mix plant at OMC carriage of mixed material to work site upto all leads spreading in uniform layers with motor grader on prepared surface and compacted with three wheel 80-100 kn static roller to achieve the desired density, complete as per technical Specification Clause 402 for grading –I material and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 116 | Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm(twenty five millimetre), aggregate cement ratio not to exceed 15:1(fifteen isto one), aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum(one hundred fifty kilogramme per cubic metre), optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10(ten) Mpa at 7(seven) days, mixed in a batching plant, transported to site, for all leads and lifts, laid with a mechanical paver, compacting with 8-10(eight to ten) tonne vibratory roller, finishing and curing etcetera complete as per direction of Engineer- in- charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 117 | Providing and laying factory made 60mm (Sixty millimetre) thick cement concrete paver block of M-30 ( M-Thirty) grade with approved colour, design and pattern (NTC make ISI marked) chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetra of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick (fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 118 | Providing and fixing 10x10x7.50 cm(ten into ten into seven point five zero centimetre) Granite stone block hand cut and chisel dressed on top, for paving in floors , drains etcetera laid over 20mm ( twenty millimetre) thick base mortar 1:4 (one cement : four coarse sand) with joints 10mm ( ten millimetre) wide filled with same mortar including ruled pointing etcetera complete as per direction of Engineer-in-charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 119 | Water Supply |
| 120 | Providing and fixing 20 mm (twenty millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 121 | Providing and fixing 25 mm (twenty five millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 122 | Providing and fixing 32 mm (thirty two millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 123 | Providing and fixing 40 mm (fourty millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 124 | Providing and fixing 50 mm (fifty millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 125 | Providing and fixing 20 mm (twenty millimetre) outer dia pipe Concealed work including cutting chases and making good the walls etcetera Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 126 | Providing and fixing 25 mm (twenty five millimetre) outer dia Concealed work including cutting chases and making good the walls etcetera Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 127 | Providing and fixing 32 mm (thirty two millimetre) outer dia pipes Concealed work including cutting chases and making good the walls etcetera Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 128 | Providing and fixing 20 mm (twenty millimetre) nominal bore brass stop cock of approved quality complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 129 | Providing and fixing 25 mm (twenty five millimetre) dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 130 | Providing and fixing 32 mm (thirty two millimetre) dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 131 | Providing and fixing 40 mm (fourty millimetre) dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 132 | Providing and fixing 50 mm (fifty millimetre) dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 133 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 134 | Providing and fixing C.P.brass bib cock of approved quality conforming to IS : 8931 as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 135 | Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 690 gms (six hundred ninety grams) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 136 | Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931 a) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 137 | (SANITARY INSTALLATIONS)' |
| 138 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat (Hindware/Parryware/Cera make) and lid, 10 litre (Ten litre) low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) W.C. pan with ISI marked white solid plastic soft closing seat and lid , conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 139 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (five hundred eighty into three hundred eighty into three hundred fifty millimetre) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required single half stall urinal with 5 (five) litre P.V.C. automatic flushing cistern as per Drawing and Techanical Specifications including entire carriage of materials within all leads, lifts and other incidentals, as per approved and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 140 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre of approved quality and make of Jal/Jaquar/Parryware/Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass pillar taps of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, Toll tax, GST or other taxes imposed by the Government. |
| 141 | Providing and fixing Flexible pipe 40 mm (forty millimetre) dia P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 142 | Providing and fixing 100mm (one hundred millimetre) sand cast iron grating for gully trap as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 143 | Providing and fixing 1200x1500mm (one thousand two hundred into one thousand five hundred millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete (Modi Guard/Atul/Cera make) as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 144 | Providing and fixing 600 x 120 mm (six hundred into one hundred twenty millimetre) glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 145 | Providing and fixing C.P. Brass toilet paper holder as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 146 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm (one hundred millimetre) inlet and 100 mm (one hundred millimetre) outlet sand cast iron S&S as per IS: 3989 as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 147 | Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 31mm(thirty one millimetre) single piece moulded with height of 270 mm(two hundred seventy millimetre), effective length of tail pipe 260 mm(two hundred sixty millimetre) from the centre of the waste coupling, 77 mm(seventy seven millimetre) breadth with 25 mm(twenty five millimetre) minimum water seal, weighing not less than 260 gms(two hundred sixty kilo grams) as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 148 | Providing and fixing PTMT liquid soap container 109 mm(one hundred nine millimetre) wide, 125 mm(one hundred twenty five millimetre)) high and 112 mm(one hundred twelve millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms(one hundred five grams) as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 149 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm(two hundred fifteen millimetre) long, 200 mm(two hundred millimetre) wide with minimum distances of 37 mm(thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms(eighty eight grams) as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 150 | Internal Drainage |
| 151 | Providing and fixing 100 mm (one hundred millimetre) dia soil, waste and vent pipes conforming to IS 1729 Hubless centrifugally cast (spun) iron pipes epoxy coated inside and outside IS:15905 as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 152 | Providing and fixing 100mm (one hundred millimetre) dia bend of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete Hubless centrifugally cast (spun) iron epoxy coated inside and outside as per IS:15905 as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 153 | Providing and fixing 100mm (one hundred millimetre) dia plain bend of required degree Hubless centrifugally cast (spun) iron pipes epoxy coated inside and outside IS:15905 as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 154 | Providing and fixing 100x100x100 mm (one hundred into one hundred into one hundred millimetre) sand cast iron S&S as per IS 1729 single equal plain junction of required degree with access door, insertion rubber washer 3mm (three millimetre) thick, bolts and nuts complete as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 155 | Providing and fixing 100x100x100 mm (one hundred into one hundred into one hundred millimetre) dia single equal plain junction of required degree Hubless centrifugally cast (spun) iron epoxy coated inside and outside as per IS:15905 as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 156 | Providing and fixing 100x100x100 mm (one hundred into one hundred into one hundred millimetre) dia single unequal plain junction of required degree Hubless centrifugally cast (spun) iron epoxy coated inside and outside as per IS:15905 as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 157 | Providing and fixing 100mm (one hundred millimetre) dia terminal guard Hubless centrifugally cast (spun) iron epoxy coated inside and outside as per IS:15905 as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 158 | Providing and fixing collar 100 mm (one hundred millimetre) sand cast iron S&S as per IS 1729 as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 159 | Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate grey, or buff etcetera over a coat of primer of approved quality for new work 100 mm (one hundred millimetre) diameter pipe as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 160 | External Works |
| 161 | Providing and fixing Single socketed pipes 110 mm (one hundred ten millimetre) diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion, as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 162 | Providing and fixing 110 mm (one hundred ten millimetre) coupler on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 163 | Providing and fixing 110 mm (one hundred ten millimetre) bend 87.5° (eighty seven point five degree) on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 164 | Providing and fixing 50 mm (fifty millimetre) dia nominal bore GI Pipe complete with GI fittings including trenching and refilling etcetra as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 165 | Providing and fixing 40 mm (fourty millimetre) dia nominal bore GI Pipe complete with GI fittings including trenching and refilling etcetra as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 166 | DRAINAGE- EXTERNAL |
| 167 | Providing and fixing 150x100mm (one hundred fifty into one hundred millimetre) size P type square-mouth S.W. gully trap Class SP-1 complete with C.I. grating brick masonry chamber with grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point fifty kilogram) and frame to be not less than 2.70 kg (two point seventy kilogram) with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per standard design as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 168 | Providing and laying non-pressure NP2 class (light duty) 250 mm (two hundred fifty millimetre) dia R.C.C. Pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including testing of joints etcetra complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 169 | Providing and laying non-pressure NP2 class (light duty) 300 mm (three hundred millimetre) dia R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including testing of joints etcetra complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 170 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand), R.C.C. top slab with 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation in cement concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40mm (forty millimetre) nominal size) inside plastering 12mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design inside size 90 x 80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455 x 610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15kg (fifteen kilogram) with common burnt clay F.P.S )non-modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leadsand lifts and other incidentals. The rates are inclusive of octroi , royality, malkana , toll tax, GST or other taxes imposed by the Government . |
| 171 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand), R.C.C. top slab with 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation in cement concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40mm (forty millimetre) nominal size) inside plastering 12mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design inside size 120 x 90 cm (one hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 172 | Extra for depth for manholes Size 90x80 cm (ninety into eighty centimetre) with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 173 | Extra for depth for manholes Size 120x90 cm (one hundred twenty into ninety centimetre) with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 174 | Providing orange colour safety foot rest of minimum 6 mm (six millimetre) thick plastic encapsulated as per IS : 10910 on 12mm (twelve millimetre) dia steel bar conforming to IS : 1786 having minimum cross section as 23 mm x 25mm (twenty three millimetre into twenty five millimetre) and over all minimum length 263 mm (two hundred sixty three millimetre) and width as 165mm (one hundred sixty five millimetre) with minimum 112 mm (one hundred twelve millimetre) space between protruded legs having 2 mm (two millimetre) tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm (one hundred thirty eight millimetre) as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm (thirty into twenty into fifteen centimetre) cement concrete block 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty millimetre) nominal size) complete as per design as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 175 | Providing and constructing brick masonry road gully chamber 50x45x60 cm (fifty into forty five into sixty centimetre) with bricks in cement mortar 1:4 (one cement : four coarse sand) including 500x450 mm (five hundred into four hundred fifty millimetre) precast R.C.C. horizontal grating with frame complete as per standard design with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 176 | Providing and constructing brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) R.C.C. top slab with 1:2:4 mix (one cement :two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete as per standard design Inside dimensions 455x610 mm (four hundred fifty five into six hundred ten millimetre) and 45 cm (forty five centimetre) deep for single pipe line with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 177 | Providing and constructing brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) R.C.C. top slab with 1:2:4 mix (one cement :two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete as per standard design inside dimensions 500x700 mm (five hundred into seven hundred millimetre) and 45 cm (forty five centre) deep for pipe line with one or two inlets with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 178 | Providing and constructing brick masonry chamber for underground C.I inspection chamber and bends with bricks in cement mortar 1:4 (one cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 kg (thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) R.C.C. top slab with 1:2:4 mix (one cement :two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete as per standard design inside dimensions 600x 850 mm (six hundred into eight hundred fifty millimetre) and 45 cm (forty five centimetre) deep for pipe line with three or more inlets with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 179 | Extra depth beyond 45 cm ( forty five centimetre) of brick masonry chamber 455x610 mm (four hundred fifty five into six hundred ten millimetre) size with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 180 | Extra depth beyond 45 cm (forty five centimetre) of brick masonry chamber for 500x700 mm (five hundred into seven hundred millimetre) size with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 181 | Extra depth beyond 45 cm (forty five centimetre) of brick masonry chamber for 600x850 mm (six hundred into eight hundred fifty millimetre) size with common burnt clay F.P.S (non - modular) bricks of class designation 7.5 (seven point five) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 182 | RAIN WATER HARVESTING & BOREWELL |
| 183 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 (ninety metre depth below ground level Rocky strata including Boulders 300 mm (three hundred millimetre) dia including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 184 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fittings and accessories etcetera all complete, for all depths, 150 mm (one hundred fifty millimetre) nominal size dia as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 185 | Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm (five centimetre to twenty centimetre), in recharge pit, in the required thickness, as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 186 | Supplying, filling, spreading and leveling gravels of size range 5 mm to 10 mm (five millimetre to ten millimetre), in the recharge pit, over the existing layer of boulders, in required thickness, all complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 187 | Supplying, filling, spreading and leveling coarse sand of size range 1.5 mm to 2 mm (one point five millimetre to two millimetre) in recharge pit, in required thickness over gravel layer,for all complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender