|
| 1 | Providing and fixing of Victorian Bench covering area approx. 5’L frame to frame side frame in of heavy duty cast iron which is circular shape at front sitting corner. Seat and rest 59” long total 12 Nos. is of MS rectangular pipe 65x25mm x 16 Gauge complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) item with GST, Transportation, Installation with C.C and amp: labor at site. |
| 2 | Chain Swing (2seater): 10’L x 6’W x 8’.5 H. Horizontal frame and vertical legs is of M.S. pipe 2’’ x 12 gauge. It stays with M.S. pipe 1’’ x 12 gauge. Swinging seats-2nos is of FRP molded seat of 2mm thick fitted with M.S. pipe ½’’ frame x 12 gauge which hang with M.S. chain 6mm thick duly plated with ball bearing and M.S. flat 6mm thick housing. Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) in multi colors item with GST, Transportation, Installation with C.C and amp: labor at site. |
| 3 | Wave slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of M.S. pipe 1’’ x 12 gauge and M.S. rectangular pipe 65 x 25 mm box x 16 gauge as climbing steps which support with 1’’.25 sq. pipe x 16 gauge. Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) in multi colors item with GST, Transportation, Installation with C.C and amp: labor at site. |
| 4 | Sea Saw (4seater): - 8’L x 5’.5W x 15’ high. Frame is of M.S. pipe 2’ x 12 gauge. Sitting planks is of M.S. pipe 2’’ x 12 gauge and its cantilever and handles is of M.S. pipe ¾’ x 12 gauge. Sitting seats 4 nos. is of molded FRP material in 3mm thick with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division). Complete item with GST, transportation, installation with C.C and labor at site. |
| 5 | Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of M.S. pipe 2”, ¾” andamp: vertical ladder is of same material of 12-gauge ISI mark with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division). Complete item with GST, Transportation, Installation with C.C and amp: labor at site. |
| 6 | Providing and fixing of Knee Chair complete as per specification |
| 7 | Providing and fixing of Double skier complete as per specification |
| 8 | Providing and fixing of Shoulder wheel complete as per specification |
| 9 | Providing and fixing of Back shaper complete as per specification |
| 10 | Providing and fixing of Air Walker complete as per specification |
| 11 | Providing and fixing of Abs shaper complete as per specification |
| 12 | Providing and fixing of the horse complete as per specification |
| 13 | Providing and fixing of Shoulder shaper complete as per specification |
| 14 | Providing and fixing of parallel bars complete as per specification |
| 15 | Providing and fixing of chest shaper complete as per specification |
| 16 | Providing and fixing of single skier complete as per specification |
| 17 | Transportation All items |
| 18 | Installation charge all items |
| 19 | Merry-go-round (4-seater): 5` Dia. Main frame is of M.S. sq. pipe 2` x 2` x 14 G and having suitable handle andamp: foot-rest is of round pipe 3/4` x 12 gauge. Central pipe is of M.S. pipe 3` x 12 G with heavy duty shaft 50mm thick andamp: ball bearing assembly. It consists of 4no chair made of molded FRP Plastic. Complete with Epoxy primer (Interseal 670 HS) and PU Finish (Interthane 990) paints (Protective coating division) in multi colors item with GST, Transportation, Installation with C.C and amp: labor at site. |
| 20 | 1. FRP Molded Canopy (Gazebo Hex. Shape) Double Finishing sheet in 18`Diai) 6 No. Ornamental Design FRP Molded Pillar FRP Hexagonal Pillar base each side 195mm with vertical fitted design and height 970mm and having B class vertical m.s round pipe of size 88 mmX2.5mm thick and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.0 Paints (1st Coat of Epoxy Surface Tolerance Primer INTERSEAL 670HS and 2nd Coat of PU finish Paint INTERTHANE 990 or Equal lent ( in required shade).ii)12 No. spndred and 6 no. FriezesFloral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel and frieze uniformly grinded spray primered, spray painted with P.0 Paints(1st Coat of Epoxy Surface Tolerance Primer INTERSEAL 670HS and 2nd Coat of PU finish Paint INTERTHANE 990 or Equal lent ( in required shade)..iii) 3 No. M S rectangular tube /frp base panel railing with frameFloral and Ornate decorative design M S square pipe /frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.0 Paint in required shade(1st Coat of Epoxy Surface Tolerance Primer INTERSEAL 670HS and 2nd Coat of PU finish Paint INTERTHANE 990 or Equal lent ( in required shade).iv) One set of top frame with Double Finishing FRP Molded roof Top frame in MS tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top and bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width on either ends fixed horizontally along the length between column pillars. Also it contain FRP Molded Diamond Shape of 14` x 3 mm thick at the central top for its beautification. Each such sheet properly riveted to horizontal sheets. Complete canopy flooring with kota flooring/tile flooring at site as decided by Engineer-in-Charge and without sitting bench at site1. LED Light Strip from inside the canopy for Ambience look2. 1 Nos of Ceiling Fan inside the Canopy The scope includes complete fabrication, transportation, on-site installation, and commissioning with all necessary materials, labour, and accessories, to be completed as directed by the Engineer-in-Charge. |
| 21 | Estimate for Upgradation/ Beautification of Park Behind BPL Colony, Village – khedi kalan, Ward – 34, MCF. Please Enable Macros to View BoQ information |
