|
| 1 | INTERIOR AND CIVIL WORK OF TRANSPORT COMMISSIONER OFFICE CABIN 24 AND 25 U.P LUCKNOW |
| 2 | Providing and fixing of backdrop with 18 mm or 12 mm ply with ISI marked and finished with Designer laminates. Designer leatherite work on it. |
| 3 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :Two coats. (For Internal wall surface & ceiling)(Asian Paint or equivalent) |
| 4 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (FLOORING) |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 7 | Providing and fixing of 12.5 mm thick tapered edge gypsum plain board conforming to IS:2095-(Part I):2011 (Board with BIS certification marks) |
| 8 | Grid Ceiling Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizont al level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm |
| 9 | Supply & Installation of Flush Door Renovation work finishing with designer laminates or leathrite. All complete as per directions & instructions of Architect/Eng-In-Charge |
| 10 | Providing and fixing of Door Chaukhat Panelling made by 12 mm or 18 mm ply board finishing with designer laminates. All complete as per directions & instructions of Architect/Eng-In-Charge |
| 11 | Providing & Fixing of Laminated wooden flooring. All complete as per directions & instructions of Architect/Eng-In-Charge |
| 12 | Skirting |
| 13 | Profile |
| 14 | Providing and fixing designer handles locks with with complete fittings as required |
| 15 | Supply & Installation of Blinds with Translucent, blended double roller fabric with a Textile & subtle glass look. The Subte fold in the Closeal Stripes add a extra dimension of the fabric. |
| 16 | FURNITURE |
| 17 | CABIN 24 and 25 |
| 18 | Table made with 12 mm and 18mm ply board and finished with designer 1 mm laminate with designer handles and other hardwares or accessories as per requirement . All complete as per directions & instructions of Architect/Eng-In-Charge. (SIZE-L1800xW750xH750) |
| 19 | High Back Chair, Chrome Plated Pipe Frame And Arm, Leatherette On Arm, Net Leatherette Tapestry, Gas Lift, Chrome Base |
| 20 | Low Back Chair, Chrome Plated Pipe Frame And Arm, Leatherette On Arm, Net Leatherette Tapestry, Gas Lift, Chrome Base |
| 21 | 3 Seater Sofa made by pine wood and finished with designer fabric or leathrite with legs teak wood or ms with pu polish or pu coating. |
| 22 | Designer chair made by pine wood and finished with designer fabric or leathrite with legs teak wood or ms with pu polish or pu coating. |
| 23 | Workstation with overhead made with 12 mm and 18mm ply board and finished with designer 1 mm laminate with designer handles and other hardwares or accessories as per requirement . Storage inculdes Shelfs and drawers. All complete as per directions & instructions of Architect/Eng-In-Charge. (SIZE-L900xW600xH750) |
| 24 | Mini Fridge cabinet made with 12 mm and 18mm ply board and finished with designer 1 mm laminate with designer handles and other hardwares or accessories as per requirement. All complete as per directions & instructions of Architect/Eng-In-Charge. (SIZE-L600xW600xH750) |
| 25 | TV cum crockery made with 12 mm and 18mm ply board and finished with designer 1 mm laminate with designer handles and other hardwares or accessories as per requirement . . All complete as per directions & instructions of Architect/Eng-In-Charge. (SIZE-L1800xW375xH2000) |
| 26 | TOILET |
| 27 | Vanity made with 12 mm and 18mm ply board and finished with designer 1 mm laminate with designer handles and other hardwares or accessories as per requirement. All complete as per directions & instructions of Architect/Eng-In-Charge. |
| 28 | ELECTRICAL WORK |
| 29 | wiring point for light point /fan point/ exhast fan point / call bell point with 1.5 sq mm FRLS pvc insulated copper conductor single core cable in surface /pvc conduit with copper earth continuity wire drawrecessed medium class pvc conduit with modular switch modular plate suitable G.I. box and eartheing |
| 30 | Same as item No.(1) but for call bell point |
| 31 | Light point Secondary with 1.5 sq.mm |
| 32 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 33 | wiring for circuit / submain wiring along with earth wire with the following size of FRLS pvc insulated copper conductor single core cable core surface / recessed medium class pvc conduct as required 2x2.5sq mm +1x2.5 sq mm earth wire |
| 34 | Supply and fixing of 15 W LED COB Downlighters complete in all respects. Make: Usha or Eq |
| 35 | Supply and fixing of 6 module plate complete in all respects |
| 36 | Supply and fixing 4 module plate complete in all respects |
| 37 | Supply and fixing 2 module plate complete in all respects |
| 38 | Supply and fixing of 3 module plate complete in all respects |
| 39 | Supply and fixing 8 module plate complete in all respects |
| 40 | Supply and fixing 16 amp socket complete in all respects |
| 41 | Supply and fixing 16 amp switch complete in all respects |
| 42 | Supply and fixing 6 amp socket complete in all respects |
| 43 | Supply and fixing 6 amp switch complete in all respects |
| 44 | Supply and fixing phone port complete in all respects |
| 45 | Supply and fixing blank switch complete in all respects |
| 46 | Supply and fixing I.O box complete in all respects |
| 47 | Supply and fixing USB Port complete in all respects |
| 48 | Supply and fixing AC controller complete in all respects |
| 49 | Supply and fixing fan regulator complete in all respects |
| 50 | Supply and fixing wall fan complete in all respects |
| 51 | Supply and fixing ceiling exhaust fan complete in all respects |
| 52 | Supply and fixing of Track complete in all respects. . |
| 53 | Supply and fixing of Track Light complete in all respects. . |
| 54 | Supply and fixing of 15 W Deep Recessed Vito Panel complete in all respects. Make: Usha or Eq |
| 55 | Supply and fixing of Decorative Hanging Light complete in all respects. |
| 56 | SANITARY FIXTURES & ACCESSORIES : I |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 58 | 20 mm nominal dia Pipes |
| 59 | 32 mm nominal dia Pipes |
| 60 | Elbow 90' for 22.22 mm outer dia SS Pipe |
| 61 | Elbow 90' for 34.00 mm outer dia SS Pipe |
| 62 | Equal TEE for 22.22 mm outer dia SS Pipe |
| 63 | Couple/Socket fitting for SS pipe 22.22 mm |
| 64 | Reducing Elbow 90' for 22.22mmx15.88 mm outer dia SS Pipe |
| 65 | Rigid PVC Pipe 75 mm dia |
| 66 | 32mm dia |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.100 mm nominal dia Pipes |
| 68 | Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before with supply and cost of other fIttlings such as elbow,bend,tee and y-tee,Cowel including supply of all marerial labour and T&P. Required for proper completion of work. |
| 69 | 90 mm O.D. |
| 70 | 110 mm O.D. |
| 71 | Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali. |
| 72 | Supply and fixing of UPVC S.W.R. Cowel confirming to IS-14735. |
| 73 | Size 75/90 mm |
| 74 | Size 110 mm |
| 75 | Providing and fixing rimless wall hung water closet including PP seat cover, Hinges, Accessories and c, nuts, bolts and gasket etc. complete. |
| 76 | Providing and fixing Cistern and cistern fitting, nuts, bolts and gasket etc. complete. |
| 77 | Providing and fixing Control plate, nuts, bolts and gasket etc. complete. |
| 78 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including Pillar cock, painting of fittings and brackets, cutting and making good the walls wherever require:- |
| 79 | Providing and fixing Basin Mixer with brackets, cutting and making good the walls wherever require:-- |
| 80 | Providing and fixing Single liver Waste Coupling :-- |
| 81 | Providing and fixing white vitreous china battery based infrared sensor operated urinal, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. |
| 82 | Providing & fixing C.P. brass HG angle valve E-E DN15xDN15-15mm-Make- |
| 83 | Providing and fixing CP Brass 32 mm size Bottal Trap |
| 84 | Providing & Fixing C.P. Brass Health Faucet |
| 85 | GST will be paid extra as per rule applicable Please Enable Macros to View BoQ information |
