|
| 1 | Cleaning and grubbing road land including uprooting rank vegitation grass, buses, shrubs, sapling and trees grit upto 300mm , removal of stumps of tree cut earliar and disposal of unserviceable material to be used or auction , upto a lead of 1000 M including removal and disposal of top organic soil not exceeding 150 mm in thickness . Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 2 | Removal (including stacking and proper handling over to concerned Authority) of stumps and roots of trees having girth 300mm and backfilling the pit created to required compaction complete as per technical specifications clause 201 and 305, or as directed by the engineer, for girth size above 300mm Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 3 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 4 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 5 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 6 | Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 7 | Recycling pavement by cold milling of existing bituminous layers, planning the surface after cold milling, reclaiming excavated material to the extent of 30 per cent of the required quantity, hauling and stock piling the reclaimed material near the central recycling plant after carrying out necessary checks and evaluation, adding fresh material including rejuvenators as required, mixing in a hot mix plant, transporting and laying at site and compacting to the required grade, level and thickness, all as specified in clause 519. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 8 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 9 | Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 10 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 11 | Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 12 | P/L of Interlocking concrete block pavement Zig - Zag having thickness 80 mm as per drawing and technical specification clause 1504 Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 13 | TRAFFIC SIGNS - (as per IRC:67-2012)Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60) 90 cm equilaterial triangle Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 14 | Center Line Edge Line (Thermo Plastic Paint)Providing and Applying Hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gm /sqm area. Thickness of 2.5 mm is excusive of surface applied glass beads as per IRC 35. The finish surface tu be leveled uniform and free streaks and holes. Composition of thermo plastic material shall be as per table 800-3 of clause 803 of MORTH including cost of all material labour T&P etc required for proper completion of work as directed by E/I. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 15 | Cat Eye (Raised Pavement Marker/Road Stud) Sharp Curve and Abadi Portion.Supply and fixing of Raised Pavement marker (Cat Eyes) of Avery Dennision/3M make of approved quality in size of width not exceeding 20 mm and height not exceding 20 mm made up to strong Engineering Polymer thermoplastic polyurethene with Electronic welded abrasion resistant lenses for Retro Reflective in dry and wet weather condition alone with Bituminous adhesive as per MORTH Specification. Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 16 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per Drawing and Technical Specifications.304 (9.01) Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 17 | PCC 1:3:6 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. 1500, 1700 & 2100 (12.8) Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 18 | M-15 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.1500, 1700 & 2100 (9.14) Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 19 | Furnishing and Placing Reinforced/ Prestressed cement concrete M-20 grade in foundation as per drawing and Technical Specifications.1500, 1700 & 2100 (9.14) Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 20 | M-25 Reinforced Cement Concrete in box culvert complete as per Drawing and Technical Specifications.1500, 1700 & 2100 (9.15) Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 21 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. 1600 (9.16) Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 22 | M.S or iorn work in angle iorn for joint including Supply of matrial labour T&P etc Required for proper compltion of work size 100x100x8 mm Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 23 | Angle Iron 63x63x6 mm @6 kg/m Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 24 | Flat Iron width 40 mm& 6 mm thick @1.9kg/m Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 25 | Nut Bolt For fixing Angle Iron Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 26 | Labour charge & Velding Charge per R/M Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 27 | Painting of kerbs with two coats synthetic enamel paint in all shades on new concrete surface after filling earth in median as per MORT&H specificaiton No 14.16.(800) Complete in all respect as per direction of E/I. (Including Labourcess but Excluding GST). |
| 28 | 5 Year Maintenance Charge Complete in all respect as per GO No. 17/2024/Sa-23-1-2024-23-1099/113/2023 Dated 16.01.2024 and Circular of EnC 3689C0PRMC/Mool-23-24 Dated 17.02.2024 & direction of E/I. (Including Labourcess but Excluding GST). 1st Year Mainntenance Cost @ 0 % & 2nd Year @ 0.25% |
| 29 | For 3rd Year @ 0.50% |
| 30 | For 4th Year @ 0.75% |
| 31 | For 5th Year @ 1% Please Enable Macros to View BoQ information |
