|
| 1 | Schedule-3 Summary Tender Inviting Authority: Superintending Engineer, Electricity Transmission Design Circle, 10th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001 Name of Work: Design, Engineering, Manufacturing, Testing, Supply, Stringing, Installation, Testing & Commissioning etc. for Diversion/Shifting/Height Raising of 220 KV DC PGCIL-Gola line (approx. 21.047 route Km) of UPPTCL, on Turn-key basis Tender No: TD-530/26 Bidder Name & Address : SCHEDULE OF QUANTITIES AND PRICES (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name, Address and Values only ) |
| 2 | Total Price for Supply [Schedule S-1 ] |
| 3 | Total Price for Work [Schedule S-2 ] |
| 4 | Total Price [S-1+S-2] |
| 5 | GST @18% [18% of 3] Total Bid Price including GST [3+4] 0.0 Date: Signature Bidder Name: Designation : Name & Address of Company SCHEDULE S-1 : (SUPPLY OF MATERIAL) Tender Specification No.: TD-530/26 Name of Firm: S N Item Unit Qty Ex-Work per unit rate (Rs.) Freight(Rs.) P&F(Rs.) INS(Rs.) Unit FOR Destination rate (5+6+7+8)(Rs) Total Amt (Exclusive of GST) (Rs.) |
| 6 | TOWERS a Fabrication, galvanizing, Inspection and supply of DC towers including stubs, extension and stub-setting templates, gantry structures as per drawings & BOM (i) Mild steel MT 665.058 0.0 0.0 b Hot dip galvanized, Hexagon round hexagon head transmission tower Bolts Nuts and washers for above structures as per BOM MT 25.494 0.0 0.0 |
| 7 | TOWER ACCESSORIES (a) Number Plate Nos. 77.0 0.0 0.0 (b) Danger Plate Nos. 77.0 0.0 0.0 (c) Phase Plate in sets of red, blue and yellow for Tension towers Nos. 154.0 0.0 0.0 (d) Bird Guard for towers Nos. 130.0 0.0 0.0 e Circuit Plate (set of 2) Nos. 77.0 0.0 0.0 (e) Pipe type earthing material for towers Nos. 75.0 0.0 0.0 |
| 8 | Porcelain Disc Insulators (a) 70 KN Nos. 2200.0 0.0 0.0 (b) 160 KN Nos. 12000.0 0.0 0.0 |
| 9 | HARDWARES SUITABLE FOR ACSR Zebra (a) Single suspension fittings Nos. 170.0 0.0 0.0 (b) Single Tension fittings Nos. 680.0 0.0 0.0 (c) Double Tension fittings Nos. 40.0 0.0 0.0 |
| 10 | CONDUCTOR ACCESSORIES SUITABLE FOR ACSR Zebra (a) Vibration Dampers Nos. 1016.0 0.0 0.0 (b) Mid Span compression Joint Nos. 90.0 0.0 0.0 (c) Repair sleeves Nos. 150.0 0.0 0.0 (d) Performed Armour Rod Nos. 132.0 0.0 0.0 |
| 11 | OPGW (a) 48 Fibre (DWSM) OPGW Fibre Optic Cable route km 22.0 0.0 0.0 (b) Supply & Installation of Hardware set for 48 Fibre (DWSM) OPGW* route km 22.0 0.0 0.0 (c) Joint box (48 Fibre) Nos. 17.0 0.0 0.0 Total 0.0 GST@18% 0.0 Total with GST 0.0 NOTE: * Tenderer must quote their rates for Ex-Works, Packing and Forwarding, Transportation and Insurance Charges separately in Indian Rupees and upto 02 decimal places only as per Columns of above Price Schedule. * GST shall be paid extra (applicable at the time of supply/work) on total of Ex-Works, Packing and Forwarding, Transportation and Insurance Charges. Present rate of GST on work contract is 18%. Signature Date: Bidder Name: Designation : Name & Address of Company * One set of installation hardware set shall contain all installation hardware fittings& accessories as may be required for 1 km of OPGW/Fibre Optic Approach Cable * Tenderer must quote their rates for Ex-Works, Packing and Forwarding, Freight and Insurance Charges separately in Indian Rupees and upto 02 decimal places only as per Columns of above Price Schedule. * GST shall be paid extra (applicable at the time of supply/work) on total of Ex-Works, Packing and Forwarding, Transportation and Insurance Charges. Present rate of GST on work contract is 18%. Signature Date: Bidder Name: Designation : Name & Address of Company SCHEDULE-S-2 (Erection work) Tender Specification No.: TD-530/26 Name of Bidder(Firm): SN DESCRIPTION UNIT Qty. Unit Rate Amount Ecxclusive of GST (Rs.) |
| 12 | Survey including preparation of schedule of materials, marking of locations (Route length),GPS Survey of line with co-ordinates of each tower(The length of line shall be authenticated by GPS Survey) |
| 13 | Check survey |
| 14 | Soil testing |
| 15 | Cost of excavation of 220 KV tower foundation pits including all earth work,backfilling, levelling etc. |
| 16 | Setting of stubs including all foundation work but excluding the cost of concerting and excavation (Rate per location) for following towers : i 220 KV DA Nos. 20.0 0.0 ii 220 KV DB Nos. 26.0 0.0 iv 220 KV DC Nos. 25.0 0.0 |
| 17 | Cost of concreting for all types of tower foundation including cost of cement,dewatering,shoring and shuttering,forming,curing but excluding cost of reinforcement bars i 1:2:4 concreting Cu .m. 2965.46 0.0 ii 1:3:6 concreting (PCC) Cu .m. 181.63 0.0 |
| 18 | Erection of Superstructure of 220KV Towers and Anchor tower and their extensions wherever required including all work above ground level excluding hoisting of insulators, hardware & accessories, but including fitting of danger, number, phase plates, bird guard,anticlimbing device and fixing & punching for 220KV SC/DC lines |
| 19 | Tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground level whichever is higher with three tacks at 1200seperatiion of minimum 10 mm thickness with 10mm/12 mm electrode & application of Zinc rich Aluminium paint on the affected surface including cost of all material including tack welding of River Crossing tower & Anchor towers. |
| 20 | Laying, stringing, tensioning clamping, jointing etc of ACSR ‘Zebra’ conductor including hoisting of insulators , fitting of all necessary hardware and accessories i.e. fittings Armour rods, vibration dampers etc.on all Six phases of 220 KV DC lines |
| 21 | Laying, stringing, tensioning, clamping, jointing,including fittings of all necessary Hardware and accessories of OPGW & OFAC, termaination at S/s,installation of FODP, end to end connectivity & testing etc on 220 KV lines |
| 22 | (a) Grounding work including earth work etc for pipe type grounding including cost of coke & salt. (b) Grounding work including earthwork etc for counterpoise grounding materials including cost of all material Nos 2.0 0.0 |
| 23 | Installation of steel reinforcement bars in R.C.C. foundation including cost of steel reinforcement bars with cutting, bending, placing, binding etc. |
| 24 | Anchoring of section towers by providing stay on cross arms of section towers before removal of old conductors including suitable fixing of stay rod by making CC foundations and removal thereof after complication of work (01 job per arms) |
| 25 | Construction of scalloding of sufficient height on both side of H.T/L.T line for provideing sufficient clearance to conductors during siringing & de-stringing of ACSR Zebra conductor as per requirment. |
| 26 | Dismantling of 06 (Six) phases exising ACSR Zebra conductor all hardware fitting and conductor accessories e.g. armour rod , vibration dampers, insulator strings etc of exitsting line and re-rolling of dismanted conductor on empty drum for re-use and safe transporation of all removed material to UPPTCL store. |
| 27 | De-stringing of 24 fibre OPGW cable along with hardware fitting, Joint Box and its proper rolling |
| 28 | Dismantling and Stacking of 220 KV Double Circuit towers after cutting of bolt with all safety and precaution along with associated works.Dismantling of the tower is done piece by piece in a safe manner by removing the tack welding / punching, un-fastening the bolts & nuts in a systematic manner, the members so dismantled shall have to be in such a condition that the same can he re-used in future. To the maximum possible extent as cutting shall have to be avoided. Similarly, while de-stringing the materials are to be removed carefully without damage to the materials (Conductor/ Insulators / Hardware fittings etc.). The removed/released materials are to be re-used to the extent possible |
| 29 | Transportation/Carriage of dismantled material (tower parts) from site to store at 132kV S/s Kauriram, Gorakhpur alongwith loading, unloading, stacking |
| 30 | Dismantling of earlier foundation which includes Excavation, breaking of foundation upto 2 mtr depth and removing of concrete, cutting removing of stubes and steel reinforcement, backfilling levelling and making field suitable for agriculture |
| 31 | Cutting of different types of trees like mango,Neem,Sheesham, Eucalyptus, popular etc. having follwing Girths and falling in the range of corridor of above Transmission line to Provide Minimum allowed ROW Clearence for 220 KV line & Conductors on both side of tower/line with all due Care of safety&Precautions to Avoid any damage to nearby Building Power & Telephone lines passing nearby,crops,other nearby Trees etc.The work also includes Removing, Eliminating& Cleaning the lines Sites after Cutting of the Trees i Trees having Trunk upto 1.0 mtr girth Nos 300.0 0.0 ii Trees having Trunk above 1.0 mtr girth Nos. 100.0 0.0 |
| 32 | Lopping & Chopping of Branches of Different types of Trees like Mango, Neem, Sheesham, Peepal Semal, Eucalyptus, Popular etc.Falling in the range of Corridor of the above Transmission Lines to Provide the Minimum allowed ROW Clearence for 220 KV line & Conductors on both side of the tower/line with all due Care of safety & Precautions to Avoid any damage to nearby Building Power&Telephone lines passing nearby,crops,other nearby Trees etc.The work also includes Removing Eliminating & Cleaning the Line Sites after Lopping & Chopping of the Trees. |
| 33 | Cutting Lopping &Chopping of Bamboo Koty falling the range of line corridor above transmission line with all due Care of safety&Precautions to Avoid any damage to nearby Building Power&Telephone Lines passing near vicinity of trees with all cost of men, misc. consumable and T&P etc. TOTAL 0.0 Signature Date: Bidder Name: Designation : Name & Address of Company |
