|
| 1 | PART-A |
| 2 | Earth work in surface excavation not exceeding 20cm in depth but exceeding 1.5m in width as well as 10 sqm on plan victuding getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer in-charge [SOR CH-4 SINO. 1] |
| 3 | 0.30 m & above |
| 4 | Centering and shuttering induding strutting, propping etc. and removal of form work for (up to 5th floor). Foundations, footings, bases for columns[SOR CH-5 SINO-31 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level. )1:24 (1 Cement: 2 coarse sand zone (ii 4 graded stone aggregate 20 mm nominal size JESOR CH-5 SL.NO-11 |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hosting firing in position and applying a priming coat of approved steel primer all complete. [50R CH-1051 NO-2] |
| 7 | Chain link fabric fenching mesh of size 50x50mm made up of G.1. wire dia of 4mm. (DSR 1670) |
| 8 | Part-B Pathway |
| 9 | Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting cut and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 150R CH-4 SINO. 11 |
| 10 | 0.15 to 0.30m |
| 11 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundations etc in layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5m. SOR CH-4 SINO-41 |
| 12 | Brick work with common bunt clay (non modular) bricks of class -150 in foundation and plinth inCement mortar 1:4/1 cement 4 coarse sand) (SOR CH-6 SI NO.1 |
| 13 | Construction of granular sub base by providing close graded material spreading in uniform layer with motor graded on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desiredensity,complete as per clause Morth 401. (santioned rate) |
| 14 | Providing and laying of interlocking concrete block pavement having thickness 80mm as per drawing and technical specification clause 1504. (exclusive G.S.B) SOR CH-26 SINO-22) |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level.1:4:8 (1 Cement: 4 coarse sand zone (III)8 graded stone aggregate 40 mm nominal size)[SOR CH-5 SI.NO-11 |
| 16 | Providing 12 mm cement plaster of mix(1:4 1 cement :4 fine sand) (SOR CH-13 ST.NO-11 |
| 17 | Finishing walls with exterior paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over Itr/10sqm including one coat of primer appiled 2.0.75/tr/10sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work (SOR CH-15 SI NO.-34] |
| 18 | Finishing wall with putty approved brand and manufacture and of required shade on undacorate wall surface to give even shade over including curing and cost of all material labour, T&P etc. required for proper completion of work. (SOR CH-15 SI NO.-30] Please Enable Macros to View BoQ information |
