|
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | Demolition of cement concrete un-reinforced in ground fllors/ FF and pavings n.exc 15cm thickness and removal of unserviceable material outside the defense land or for filling in low laying area as decided complete all as specified and directed. |
| 3 | Supply and filling of good earth suitable for filling under floors free from debris including transportation, loading, unloading and royality etc from any lead outside the defence land incl spreading and levelling in layers n exc. 25cm thick and well ramming including watering as required complete all as specified and directed.Note: The quantity of earth requirement to be filled shall be measured in the MB with No of filling & their sizes after deducting 10% building please |
| 4 | M&L for hardcore of broken stone boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | M&L for cement concrete work 1:4:8 type D-2 in sub-case to flooring etc complete all as specified and directed. |
| 6 | M&L pre-polished machine pressed rubber moulded precast cement concrete interlocking modular paver block in combo design of size 200x100x60mm & 100x100x60mm or 300x200x60mm, 200x200x60mm & 200x100x60mm of approved shades of colour/pigment in approved pattern with minimum M-35 Grade over and including 25mm thick layer of sand cushioning complete all as specified and directed. |
| 7 | M&L for machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of approved coloured tiles confirming to IS-15658-2006 of 80mm thickness M-40 Grade and including filling of interstices with fine sand over and including 25mm thick layer of sand cushioning complete all as specified and directed. |
| 8 | M&L for mat finished full body vitrified coloured tiles 10mm thick 600x600mm, in floors/ proch/ parking areas etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20-22mm thick screed bedding in Cement Mortar 1:4 complete all as specified and directed. |
| 9 | M&L for factory made rubber moulded precast cement concrete type B1 1:2:4 (20mm graded aggregate) in Cement Mortar 1:4 in kerb stone use with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n/ exc/ 50 mtrs complete all as specified and directed. |
| 10 | M&L cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in benching coping etc complete all as specified and directed. |
| 11 | Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exc. 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed. |
| 12 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 13 | M&L for cement concrete 1:3:6 using 40mm graded stone aggregates in foundations, filling and mass concrete, bedding, haunching, sorrounding of drainage pipes complete all as specified and directed |
| 14 | S&F 300mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with including collars complete all as specified and directed. |
| 15 | S&F 70mm thick SFRC factory made drain covers with perforations and with MS frame of flat iron minimum 1.25mm thick as in suitable sizes as per ground requirement as approved complete all as specified and directed. Please Enable Macros to View BoQ information |
