|
| 1 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all and M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 2 | M & L for preparation of new surfaces and applying 2 coats of OBD over a coat of primer all as specified and directed. |
| 3 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all and M & L rendering 15 mm thick in cement plaster 1 : 4 with WPC (@ 3%by weight of cement) on fair faces of brick wk or concrete surface finishing the surface even and smooth without using extra cement. Note:- WPC shall be measured & paid seprately. |
| 4 | Supply only intergal water proofing. |
| 5 | M & L for preparation of new surface of wall including cornices and apply two coat of cement based paint over a coat of primer etc complete all as specified and directed by Engineer-in-Charge. |
| 6 | Demolition of brickwork built in cement mortar or cement lime mortar |
| 7 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge. |
| 8 | S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, with glazing bars, dovetailed or welded complete all as specified and directed. |
| 9 | S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, without glazing bars dovetailed or welded complete all as specified and directed. |
| 10 | S & F Steel ventilator with top hung/Side hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 11 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed . |
| 12 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge |
| 13 | Taking down chowkhat with shutter without taking off shutter from chowkhat n. exceeding 1.5 Sqm each complete all as specified. |
| 14 | Taking down chowkhat with shutter without taking off shutter from chowkhat exceeding 1.5 Sqm & n.exceeding 4 Sqm each complete all as specified. |
| 15 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and directed |
| 16 | Taking down Shutters of any description exc 1 sqm but n. exc. 2.00 sqm each complete all as specified. |
| 17 | Taking down Shutters of any description exc 2.00 sqm each complete all as specified and directed |
| 18 | S & F second class soft wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 19 | S & F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, ection 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified |
| 20 | S & F 30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat all as specified and directed . |
| 21 | M&L Plain fillets.square, rectangular or triangular in section, bull nosed,splayed,chamfered or rounded on one edge or face secured with nails or brads.2nd class softwood Sectional area Exc 13 & n. exc 25 sq.cm complete all as specified. |
| 22 | Dismantling wrought iron or mild steel work of any description (i.e wind tie etc) not otherwise provided for etc complete all as specified and directed. |
| 23 | S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W (Gde- E- 250) quality- A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed. |
| 24 | S & F Mild steel framed work such as window grills, gratings, etc with ends of bars shouldered or riveted, or forged into spikes; framed barred iron doors; ladders,railings; framework of water tanks confirming to Fe 290.Gde-E-165 complete all as specified . |
| 25 | S & F 1.25 mm thick Mild Steel Plain, black sheet in Chullah hood, covering to door shutters, ducts, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and directed. |
| 26 | S & F powder coated aluminium doors frames and shutters fixed or side hung including jointing cleat for fixing including all fittings like handles, locks, hinges, stoppers, latches etc complete all as specified in Drg No CE (AF)/NGP/03/TD/32, Sheet 1 to 2/2. |
| 27 | S & F powder coated aluminium grills of approved design and pattern, with approved standard section fixed to the window frame all as specified by Engr-in-Charge |
| 28 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed as directed |
| 29 | S & F rubber beading size 65x5 mm for Doors complerte all as directed |
| 30 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc.of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 31 | S & F Pressed steel frames for door frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete, as specified, |
| 32 | S & F Pressed steel frames for door frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete, as specified, |
| 33 | M & L PCC 1:3:6 type C1 using 12.5/20 mm graded stone aggregate in roof kerbs or mud stops, rounded complete all as specified. |
| 34 | M & L PCC 1:2:4 type B1 using 20mm graded stone aggregate for fixing of hold fast etc complete all as specified and directed |
| 35 | S&F in reapairs Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and directed . |
| 36 | S&F in reapairs Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed . |
| 37 | S&F extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed. |
| 38 | S&F in repairAluminum Barrel tower bolt 150mm complete all as specified and directed |
| 39 | S&F in repair aluminium anodised 300mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed. |
| 40 | S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 41 | S & F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 42 | S & F in repairs 100 mm Hasp and staple,aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 43 | S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers & complete all as specified and directed. |
| 44 | Hacking out old broken glass from metal frame including punching or drilling out old glazing complete |
| 45 | M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty/rubber gasket area n.exc 0.5 Sqm in each pane |
| 46 | S & F sheet glass, 3 mm thick ordinary quality and glazing with oil putty complete all as specified and directed. |
| 47 | M & L Running welding in repairs thickness of metal to be welded n exc 6mm thick complete all as specified and directed. |
| 48 | M & L spot welding in repairs n exc 2.5 cm in lenghth,tthickness of metal to be welded n exc 6mm thick complete all as specified . |
| 49 | S &F in reapirs Aluminium(Die cast) body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 50 | S & F in repairs 300 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 51 | M & L for preparation of new wooden surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed . |
| 52 | M & L for preparation of new Steel surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed . |
| 53 | M & L for preparation of old surface and applying one coat of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 54 | S&F in repair mild steel chromium plated curtain rod 20 to 25 mm dia on SS brackets and fixing with decorative side ballusters both ends etc complete all as specified and directed |
| 55 | S & F in repairs MS steel window peg stay stove enamelled for supporting windows shutter complete all as specified and directed. |
| 56 | S & F in repairs MS steel window left/right including necessary welding for windows shutter complete all as specified and directed. |
| 57 | S & F 18/19mm thick commercial plywood interior grade both sides fixed with screws to timber frame work edge chamfered including beading/battens as required as directed by Engr-in-Charge complete |
| 58 | S & F 0.9mm thick decorative laminate (sunmica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufactures instructions as directed by Engr-in-Charge |
| 59 | Note:- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri Please Enable Macros to View BoQ information |
