Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge.1:3:6 or richer mix |
| 3 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 4 | DISMANTLING ROOFING INCLUDING RIDGES, HIP VALLEYS AND GUTTERS ETC. AND DEPOSITING THE SERVICABLE MATERIALS IN CENTRAL/SITE STORES AND INCLUDING DISPOSAL OF UNSERVICABLE MATERIALS WITHIN 50 M LEAD AS PER DIRECTION OF ENGINEER IN CHARGE. ASB |
| 5 | Dismantling of steel structure such as platforms, support railing, hoppers, chutes, ducts, cells dismantling of mech. Equipments and elect. Equipments/ assemblies including rubber lined pipe line all heights |
| 6 | DISMANTLING WHITE VETROUS CHINA WASH BASIN/SINK/URINAL INCLUDING FITTINGS AND REMOVAL OF UNSERVICABLE MATERILAS TO SITE/CENTRAL STORES AS PER DIRECTION OF ENGINEER IN-CHARGE. |
| 7 | DISMANTLING INDIAN TYPE W.C.PAN/EUROPIAN TYPE W.C.PAN, INCLUDING FOOR REST AND FITTINGS, BUT EXCLUDING CISTERN AND REMOVAL OF UNSERVICABLE MATERILAS AND DEPOSITING THE SERVICABLE MATERILAS TO SITE/CENTRAL STORES AS PER THE DIRECTION OF ENGINEER IN-CHARGE |
| 8 | Deployment of JCB for removing SILT or handling of EARTH |
| 9 | Hiring Charges for Tractor & Trolley with Driver and Helper per Hour for Minimum deployment of 05 Hrs/Day. |
| 10 | SUPPLY AND STACKING THE QUERRY RUBBISH WITH ALL LEADS AND LIFTS AT SITE,SPREADING,WATERING AND ROLLING COMPLETE FOR FILLING OF THE LARGE POT HOLES OF THE ROAD |
| 11 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kinds of soil. |
| 12 | Extra for every additional lift of 1.5 m or part thereof in. All kinds of soil. |
| 13 | Excavation in soft rock, laterite, old cement concrete & lime masonry etc. for footing , machine foundation, plinth beams, wall footing, gutters , tanks including dressing of sides and ramming of bottoms, shoring, strutting, dewatering by pump if required, shifting of excavated material including all lift and lead upto a distance of 2000 m outside of plot ,in the govt approved area, stacking and spreading as directed, preparing the bed for the foundation & necessary back filling with available earth, watering , ramming, etc complete as directed. Rate to be inclusive of royalties as applicable if any. A) 0.00 - 1.50 m Depth |
| 14 | Excavation in soft rock, laterite, old cement concrete & lime masonry etc. for footing , machine foundation, plinth beams, wall footing, gutters , tanks including dressing of sides and ramming of bottoms, shoring, strutting, dewatering by pump if required, shifting of excavated material including all lift and lead up to a distance of 2000 m outside of plot ,in the govt approved area, stacking and spreading as directed, preparing the bed for the foundation & necessary back filling with available earth, watering , ramming, etc complete as directed. Rate to be inclusive of royalties as applicable if any. B) 1.50 - 3.00 m Depth |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 16 | Mass filling with approved material brought from outside, including filling in layers of 30 cm., watering, compaction, with rammer, 10Troller etc as applicable and levelling complete. The proctor density of such compacted fill shall be 95% of standard proctor, at each layer. Measurement will made for compacted quantity. |
| 17 | FILLING IN PLINTH WITH BEST AVAILABLE LOCAL SAND UNDER FLOORS INCLUDING WATERING, RAMMING CONSOLIDATING AND DRESSING COMPLETE |
| 18 | Providing and laying hard core of hand crushed / machine crushed metal 60 mm in two layers of 100 mm each consolidated to 75 mm making total thickness of 150 mm including watering, ramming with heavy rollers, levelling the surface with Murom/grit spreading etc. complete. (The rate shall be for compacted thickness.) |
| 19 | Providing and laying Wet Mix Macadam in two/one layers of 150/100mm thickness as per drawing compacting each layer with 8-10 ton vibratory power roller. The layer shall be rolled including premixing in well grade at crushed stone aggregated with watering and spreading by the required profile and compacting with vibratory roller including all material, labour, machinery with all leads and lifts etc.. complete. the mix shall be spread either by paver finisher or motor grader compacting each layer with 8-10 ton vibratory power roller. obtain the 98% of modified proctor density including all labour charges, testing charges including hire charges all tools and plants employed and all their incident charges etc.. Unless or otherwise specified rest of all complete as per MORTH specifications 406 and as directed (Table 400-11). |
| 20 | Providing and injecting chemical emulsion for anti- termite treatment and creating a chemical barrier under & around the column pits, walls, foundations, trenches, basement excavation, top surface of Murom filling in plinth and rubble soling, junction of wall and floor, along the external perimeter of the building, at expansion joint, surrounding of pipes, conduits etc. complete with applying chemical emulsion Chlorpyrifos 20 EC or Lindane 20 EC doses as specified in IS:6313 (Part II)2001 complete through licensed approved agency and shall carry a guarantee for 10 Years.( Plinth area of the building at ground floor is to be considered) |
| 21 | STONE SOLING UNDER FLOOR INCLUDING FILLING VOIDS WITH STONE CHIPS AND SAND, RAMMING, WATERING AND CONSOLIDATING ETC. COMPLETE |
| 22 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 23 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement: 2 Coarse:4 graded stone aggregate 12.5 mm nominal size). |
| 24 | Applying a coat of residual petroleum bitumen of grade VG 10 of approved quality using 1.7 Kg per SQM on Damp Proof Course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
| 25 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 26 | Reinforced cement concrete work in beams , suspended floors, roofs having slope up to 15 degrees, landings, balconies, shelves, chhajjas, lintels, bends, plain window sills, stair cases and spiral stair cases up to floor five level excluding the cost of centering, shuttering and finishing and reinforcement :-With 1:2:4 ( 1 Cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 27 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 28 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. : Footings |
| 29 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. : Columns |
| 30 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. : Plinth Beam / Grade Beam |
| 31 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. : Roof Beam / Tie Beam |
| 32 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. : Lintel Beam & Trench wall |
| 33 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. : Sunshades |
| 34 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. :Sill Beam / Coping Beam |
| 35 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. :Roof Slab |
| 36 | Providing & laying cast-in-situ reinforced cement concrete of M25 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. :Staircase |
| 37 | Providing & laying cast-in-situ reinforced cement concrete of M30 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. (Rate shall be including Concrete Brought from RMC Plant or Batching plant installed on site or outside site premises by contractor). : Footing |
| 38 | Providing & laying cast-in-situ reinforced cement concrete of M30 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. (Rate shall be including Concrete Brought from RMC Plant or Batching plant installed on site or outside site premises by contractor). : Pedestal |
| 39 | Providing & laying cast-in-situ reinforced cement concrete of M30 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. (Rate shall be including Concrete Brought from RMC Plant or Batching plant installed on site or outside site premises by contractor). : Block Pedestal for steps |
| 40 | Providing & laying cast-in-situ reinforced cement concrete of M30 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. (Rate shall be including Concrete Brought from RMC Plant or Batching plant installed on site or outside site premises by contractor). : Grade beam |
| 41 | Providing & laying cast-in-situ reinforced cement concrete of M30 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. (Rate shall be including Concrete Brought from RMC Plant or Batching plant installed on site or outside site premises by contractor). : Slab( Roof slab, Waist slab) |
| 42 | Providing & laying cast-in-situ reinforced cement concrete of M30 grade using 20 mm and down size coarse graded machine crushed hard stone aggregate including designing the mix, weigh batching, mechanical mixing, transporting and placing at all lifts, vibrating, consolidating, curing and finishing smooth as required all exposed faces, complete for the following RC structural and other elements including shuttering in straight, curved, plain, tapered or sloped, formation of cut-outs, chases, pockets, dewatering wherever necessary, the cost of all complete materials, labour, all leads and lifts, tools, plant and machineries, hire and fuel charges and all other incidental charges etc., all as per specification, drawings and as directed, but excluding steel reinforcement, which will be paid for separately under relevant items. The rates quoted shall hold good for all foundations at any depth, flooring, all floors, heights, levels, elevation, below ground level, basement, trenches, pits, tunnels etc. The rate must include providing and removing shuttering or form works at all depths & heights and no additional cost shall be paid. The design of form works shall be in contractor's scope confirming IS codes. (Rate shall be including Concrete Brought from RMC Plant or Batching plant installed on site or outside site premises by contractor). : Staircase Toe wall, RCC Wall |
| 43 | Providing necessary pockets for machine foundations and equipment foundation like chimney, DG sets, compressor, various fans and other foundations etc. The pocket shall be wider at the bottom as shown in the plan. The pocket shall be prepared out of plywood planks and shall be of folding type. The rate shall be excluding the grouting of pocket. :Pocket size 125 mm x 125 mm at top and depth up to 1000 mm. |
| 44 | Providing necessary pockets for machine foundations and equipment foundation like chimney, DG sets, compressor, various fans and other foundations etc. The pocket shall be wider at the bottom as shown in the plan. The pocket shall be prepared out of plywood planks and shall be of folding type. The rate shall be excluding the grouting of pocket. :Pocket size 250 mm x 250 mm at top and depth up to 750 mm. |
| 45 | Providing and fixing reinforcement for RCC work with Thermo mechanically treated (TMT) bar of various diameters and grade of steel as Fe 550 conforming to IS or equivalent BS specification including cutting, bending, hoisting, fabricating and placing in position according to drawings and binding the reinforcement with galvanized annealed binding wire of double fold of 18 gauge and providing PVC /Precast concrete cover blocks for placing the reinforcements in position and for maintaining the cover specified and/or according to relevant IS or equivalent BS code. |
| 46 | Providing and laying design mixed, reinforced concrete floor (M25), with screed vibrating, bull floating, vacuum dewatering, power trowelling, curing by ponding. The surface to be thoroughly cleaned with washing, manual scraping of all the adhered dust, after the curing is over and after the concrete surface is completely dry. (The ready mix concrete design mix with permitted fly ash content fly ash content of 25% by volume of cement). Vendor to give batch wise certificate for every lot. |
| 47 | Providing and Application of Self levelling Epoxy Flooring of 3.0mm thick as per the manufacturers specification. The Surface shall be prepared to have sound, clean and dry (free from moisture) surface to ensure proper bonding between the substrate and the flooring, a primer coat of Nitoprime 25 (Fosroc Made) or Sikafloor94(SIKA Made) or equivalent approved make epoxy bonding primer shall be applied over the prepared surface and allowed to cure for Six Hours, After the Primer is dry, self levelling Epoxy topping of Nitoflor SL 3000 (Fosroc Made) or Sikfloor91(SIKA Made) or equivalent approved make @ 3mm thick shall be spread out on the Primer. Top Coat shall be applied and spread evenly to maintain required thickness of 3mm using a Notch trowel followed by that spike roller shall be rolled over the levelled Top Coat to remove any entrapped air ,and to spread the material to the required thickness as per manufacturer specifications, providing a smooth surface finish including all material, tools, plant, consumables, labour, equipment, lead & lift, etc., complete as per specifications and as directed by the Engineer-in charge. |
| 48 | Grading roof for water proofing treatment with: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size |
| 49 | Extra for providing and mixing water proofing material in cement concrete work @ 1 kg per 50kg of cement. |
| 50 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. |
| 51 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressummers and cantilevers. |
| 52 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. |
| 53 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: |
| 54 | Providing fabricating & erecting structural steelwork in hot rolled sections ( ISMB, ISMC, ISA , Plates etc.) For columns, tie beams, trusses, purlins, gantry, monorail columns, cable trays, pipe racks ,castellated beams, staircase & other structural members with all bracings, gusset plates etc.as per detailed drawing or as directed at all heights and levels including removing the scales & burrs, cleaning with Phosphoric acid, marking, cutting, fabrication, hoisting, erecting & fixing in position, making alignment of members making welded / bolted / riveted Connections and finishing with two coats of synthetic enamel paint of approved quality and colour over one coat of approved red-oxide paint etc complete. Yield Stress FY = 250Mpa as per IS 2062. ( Shop drawing to be prepared by contractor for approval). |
| 55 | Providing and fixing MS Nosing angles of size as per detailed drawing including fabrication, fixing & placing in position, levelling and Finishing with two coat of anticorrosive paint etc. complete. (Rate including hold fast and fasteners). |
| 56 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 57 | RANDOM RUBBLE MASONRY WITH HARD STONE IN SUPERSTRUCTURE INCLUDING LEVELLING UP WITH CEMENT CONCRETE 1:6:12 ( 1 CEMENT : 6 COARSE SAND :12 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE ) WITH CEMENT MORTAR 1:6 (1 CEMENT : 6 COARS SAND) |
| 58 | Providing and constructing 230 mm thick Clay brick masonry Designation 75 at all elevations and heights in cement mortar 1:6 using standard size of bricks of approved make with minimum crushing strength 7.5 N / mm2. including all scaffolding, staging, striking off extra mortar, curing etc., in all floors above finished floor level etc., all complete shall be as per specification and laid as directed. |
| 59 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 60 | 6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand) |
| 61 | Providing and applying Plastering of internal walls with cement mortar 1:4, 12mm to 15 mm thick according to specifications. Rate includes providing & fixing in position expanded metal plaster mesh ( 16 gauge ) of approved make with minimum 6\\" wide strips & complete height & width of masonry & concrete structural members joints or the junctions of R.C.C columns/ beams/slab with brick work or wherever necessary, properly fixed, abutting the wall surfaces so as to get the plaster in line and plumb, necessary staging, scaffolding and curing at all levels and elevations etc. Complete as directed. Rate is applicable for at all levels & height. Mode of Measurement will be treated as actual surface area only. |
| 62 | Providing and applying plastering with two coat plaster for external surfaces with C.M 1:4, 20mm thick with base coat and a finishing coat in C.M 1:3 using water proof compound of approved make as per manufacturer's specification with rough / sponge finish at all levels and heights including grooves, providing & fixing in position expanded metal plaster mesh [ 16 gauge ] of approved make (Arpitha or equivalent) with minimum 6\\" wide strips at the junctions of R.C.C columns/ beams/slab with brick work or wherever necessary, properly fixed, abutting the wall surfaces so as to get the plaster in line and plumb etc complete as per specification. Including cleaning, making of edges, corners drip mould, groove, staging, scaffolding and curing etc. complete as per drawing & at all heights, levels and floors. Rate is applicable for at all levels & heights. Mode of measurement will be actual surface area only. |
| 63 | Providing Two coats of 'Premium Emulsion Paint' from Asian paints of approved colour/shade over Two coat of water based primer (from Asian paints or equivalent approved make ) and one coats of putty (from Asian paints or equivalent approved make )on walls, partitions and ceiling including preparation of surface by scrapping and thorough cleaning as per manufacturer’s specification fully to give an even shade as approved and curing as per manufacturers specifications and as directed. Item to include all accessories, tools & labour, men material & Lift at all levels, scaffolding with all cleaning, depropping, clearing complete. Item to include getting mock-up for 2 sqm area approved by Architect/Engineer incharge. Paint should be with low VOC as specified in Special Conditions. |
| 64 | Providing and applying anti algal weather proof Apex ultima 100% Acrylic exterior paint from 'Asian paints' or Equivalent of approved shade to the plastered, exposed brick, stone, concrete surface in two coats. Including preparation of the surface like holes,dents and cracks to be filled only by using mixture of white cement and fine sand(in the ratio 1:3), applying a Asian paint or Equivalent exterior wall primer two coat , scaffolding , curing, cleaning etc. complete.The dry/wet cleaning of floors/pipes/glass etc. after painting is to be carried out, protection of surfaces before painting is included in the item. The Warranty shall be for a period of five (5) years from the Commencement Date on all performance parameters for Algal and/or Fungal growth as per manufacturer's specification. |
| 65 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work |
| 66 | Providing and casting in situ the foundation bolt grouting with non-shrink grout (\\"Conbextra\\" GP-2 or equivalent) as per manufactures specifications excluding the cost of bolts and including all materials, tools , pouring at specified consistency, cleaning etc. complete for PEB structure. |
| 67 | Providing fixing steel door of approved make single leaf / double leaf with 1.0 mm thk MS sheet on both sides fitted on 70 X 50 mm MS hollow tube surrounded at edges and around glass and louvered areas ,duly filled in with phenolic resin-impregnated kraft paper honeycomb core, door frame of pressed ms sheet 1.6 mm thk ,10 mm square bar bracing at bottom. including all approved type heavy duty fastenings and fixtures comprising of S.S. hinges, cylindrical lock, handles 2 Nos., air seal gaskets between shutter and frame, rubber sweep strip at bottom, panic bar, \\"Dorma\\" make door closers etc. complete. (Suppliers:-Srima/Shirke/NCL/Shakti Metdoor / Shakti Hormann/ Signum/or equivalent approved make ) The contractor should submit shop drawing for approval from consultant / client before execution : D1 (1.2 m X 2.1m) (Fire Exit Door with vision panel & Push bar) |
| 68 | Providing & fixing in position approved make partly glazed panel and partly paneled 12mm thick pre-laminate board with Door with Al. framing on all sides of rail 100mmX45mm and style 63mmX38mm. section as approved & toughened clear float glass 6 mm. single glazed panel. Al frame of artificially aged extruded profiles aluminum Material of grade EN AW 6063 T66 having tensile Strength 245 N/mm2, Surface Quality P6 C0 and variation in Straightness should not be more than 0.7 mm for 1 Mtr length as per detailed drawing or as directed. Item includes floor lock provision in shutter patch fitting as per drawing, & standard chrome plated top cover mechanical floor spring assembly mounted flush to floor of approved brand. All accessories, installation, testing and lift at all levels etc complete .Height made up of all matching sections S80 X 40 profile. : DA1 (1.2 m X 2.1m) |
| 69 | Providing and fixing M.S/ GI Rolling shutter of approved make(Avians/Gandhi Automation or Equivalent, of Slat profile of Interlocking MS slats of profile type as RCS 78mm/ RSC 88mm/ RSC 113mm/ RSC 85mm & Slate thickness of 0.9mm/1.0mm/1.2mm with optical Vision windows(Curtain Grill as required) including MS bottom plate 2.5 mm thick with MS angle stiffener welded to full opening width for reinforcement. L-shaped bottom profile interlocked with bottom most slat section. The Side Guide shall be in MS /GI of size 75 mm wide for shutter width up to 6.0 mtr.;100 mm wide for shutter width between 6.0 mtr and 8.0 mtr.; 150 mm wide for shutter width above 8.0 mtr. U-shaped side guide profile for guiding the slat curtain with wind locking system. Bracket Plate shall be in Ms / GI of size 3mm to 10mm thick as per the Opening dimension. The Motor make shall be Direct drive from Kirloskar / Siemens / Crompton greaves or equivalent. The contractor should submit the data sheet of the motors along with the shop drawing before execution) The contractor should submit shop drawing for approval from consultant / client before execution. :RS (3.7m X 3.5m) |
| 70 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). :W1 (3.0m X 1.2m) |
| 71 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). :W2 (2.0m X 1.2m) |
| 72 | Providing and fixing 'Armstrong' or equivalent make mineral fiber false ceiling of approved color and size having factory applied vinyl latex paint with tegular edge with powder coated grid including cutouts for light fixtures / AC grills, diffusers & necessary framework /support required from the ceiling, etc complete. |
| 73 | Supply and Installation of Aluminum single glazed partitioning frame up to 4.35m high, of 100mm thick System, using top channel, wall starter, and bottom channel. Finish – should match the existing partitions. Glass type- 10mm thk toughened glass. The glass joints shall be of butt/Champhered type and finished with non staining silicone sealant as approved by the Architect. Partition to be fixed with 12mm thick prelaminated particle board / ACP up to 1200mm from flooring and above with up to 2400mm with 10mm thick toughened glass separated with a Aluminum Section. The 60% of glass shall be fixed with 3M film for frosted/ etched effect to the pattern as indicated in the detail drawings the portion above the glass to be closed again with 12mm thick particle board separator with an aluminum section. etc complete. |
| 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/Accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Shoe (Plain)- 110 mm |
| 75 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 MM |
| 76 | Providing and fixing on wall face unplasticised - PVC moulded fittings/Accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. Bend 87.5°- 75 mm bend |
| 77 | Providing and fixing on wall face unplasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm diameter |
| 78 | Supplying, fabricating and fixing in position inserts comprising edge angle, MS angles, plates, tees, flats holding down bolts, anchor bolts, anchor plates, pipe sleeves, monkey ladder etc., in all cement concrete works at all levels and heights above finished floor level in foundation, trenches, pits, tunnels, lift pits etc., below finished floor level including cutting, bending to shape fabricating, drilling, threading, welding lugs etc., with all tools, tackles and labour as per design or as directed including a coat of primer of approved quality and painting the exposed surface with two coats of synthetic enamel paint of approved quality and colour etc., all complete as per drawings and as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
