|
| 1 | Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all height/ depth height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs landings, shelves and the like floor etcetera upto any thickness upto all floor level, including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Providing and laying mechanically mixed and vibrated cement concrete work 1:1½:3 (One cement : one and half sand : three graded crushed/ broken stone aggregate 20mm (Twenty millimetres) nominal size) to obtain the minimum crushing strength of grade M-25 (M-Twenty five) including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/thickness upto all floor levels as per H.P.P.W.D. specifications as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 3 | Providing and laying Mild steel/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wires complete, as per direction of the Engineer-in-Charge. including carriage of materials within all leads, lifts, other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 4 | Second class brick work using common burnt clay building bricks in super structure above plinth level upto all heights/ floor level in cement mortar 1:6 (One cement : six sand) and curing complete, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental . The rate is including royality , octroi, GST, Toll tax, malkana and all other taxes as imposed by the Government. |
| 5 | Providing and fixing anodized aluminum work for door, windows, ventilators and partitions frames with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868 (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastener including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleats angle, aluminum, snap beading for glazing/paneling C.P. brass/stainless steel screws, all complete , as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetcetera aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge(Glazing, paneling and dash fasteners to be paid for separately) for fixed portion , Powder coated aluminium ( minimum thickness of powder coated 50 micron (fifty micron ) all complete as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 7 | roviding and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings(Cost of aluminium snap beading shall be paid in basic item), as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 8 | 15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 9 | 15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto all floor levels including arrises internal rounded angles chamfers and/or rounded angle in all girth and finished even and smooth complete, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 10 | 6mm (Six millimeters) thick cement plaster to ceiling with cement mortar 1:3 (One cement : three sand) for all floors level complete, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 11 | Providing and laying mechanically mixed and vibrated plain cement concrete for all type of structure nominal mix 1:4:8 ( One cement : four sand : eight graded crushed/ broken stone aggregate 40mm ( forty millimeter) nominal size on ground or under water and curing complete including pumping or bailing out water , dewatering (surface and sub soil water) and removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work in retaining wall, breast wall etcetera as per drawings and M.O.R.D. technical specification section 800,900, 1200 and 1600 as per the direction and entire satisfaction of Engineer-in-Charge Including carriage of material within all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 12 | Providing and applying white cement based putty of average thickness 1 mm (One milimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental . The rate is including royality , octroi, GST, Toll tax, malkana and all other taxes as imposed by the Government. |
| 13 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) of its equuarlied on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete, as per approved drawing, design, specifications or as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 14 | Providing and laying vitrified tiles (500mmx500mm) (Six hundred milimetre into six hundred milimetre) in different sizes (thickness to be specified by by the manufacture) with water absorption less than 0.08% (zero decimal zero eight percent) and confirming to IS: 15622 of approved make, in all coliurs and shade, laid on 20mm (Twenty milimetre) thick , cement mortar 1:3 (One cement : three sand) jointing with grey cement slurry at the rate of 3.3kg/sqm (three decimal three kilogram per square metre) in skriting risers of steps, laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS: 15477 in average 6mm (six milimetre) including grouting the joints with white cement and matching pigment etcetera, , as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 15 | Providing and laying 600x600mm (six hundred into six hundred milimetre) Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% (zero decimal zero eight percent) and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm (six milimetre) thickness, including grouting of joints (Payment for grouting of joints to be made separately), as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 16 | Providing and fixing wash basin White Vitreous China Flat back wash basin Delta No. 10010 size 630x450mm ( six hundred thirty into four hundred fifty milimetre) of Cera / Hindware with single 15 mm C.P. brass pillar tap with C.I. brackets, 15 mm (Fifteen milimetre) C.P. brass pillar taps, 32 mm (Thirty two milimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 17 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 18 | Providing and fixing water closet squatting pan (Indian suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush end. with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre (Ten litre) low level flushing cistern with fitting and brackets, 40 mm(Forty milimitre) flush bend, 20 mm (twenty milimitre) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required within all leads, and lifts disposed earth to be levelled and neatly dressed, as per directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 19 | Providing and fixing PTMT soap Dish Holder having length of 138mm, 9one hundred thirty eight milimetre) breadth 102mm, (one hundred two milimetre) height of 75mm (seventy five milimetre) with concealed fitting arrangements, weighing not less than 106 gms (one hundfred six gram), as per directions of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 20 | Providing and fixing PTMT towel rail 600mm (Six hundred milimetre) long complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 21 | Providing and fixing 15mm (Fifteen milimetre) nominal bore Bib cock of approved quality,as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental . The rate is including royality , octroi, GST, Toll tax, malkana and all other taxes as imposed by the Government. |
| 22 | Providing and fixing 15mm (Fifteen milimetre) nominal bore stop cock of approved quality,as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental . The rate is including royality , octroi, GST, Toll tax, malkana and all other taxes as imposed by the Government. |
| 23 | Providing and fixing solid type white plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers complete, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 24 | Providing and fixing 8 mm (eight milimetre) dia C.P. / S.S. Jet with flexible tube upto 1 metre (One metre) long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 25 | Providing and fixing water closet china flat back or wall orner type lipped front urinal basin of 430x260x350 mm (four hundred thirty into two hundred sixty into three hundred fifty milimetre) and 340x410x265 mm (three hundred forty into four hundred ten into two hundred sixty five milimetre) sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 26 | Providing and fixing 15mm (fifteen milimetre) nominal bore uplasticised PVC connection pipe with PTMT nuts Collar and bush of approved quality and collar with 45cm (forty five centimetre) length, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 27 | Providing and fixing C.P. brass each toilet paper holder of Continental series of Jaquar / Classic series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal, as per approved drawing, design, specification, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 28 | Providing and fixing 600x450 mm (Six hundred into four hundred fifty milimetre) beveled edge mirror of Continental series of Jaquar / Classic series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal of superior glass (of approved quality) complete with 6 mm (Six milimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, as per approved drawing, design, specification, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 29 | Providing and fixing 50mm (fifty milimetre) nominal dia cast iron floor trap of self cleaning design 2 with sand cast iron secrewed down or hinged gratting with out vent arm complete Nos including cost of cutting and making good the wall and floors, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 31 | Providing and fixing 32mm (Thirty two millimetre) diametres M.I. union for wash basin or sink.complete, as per approved drawing, design, specification, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 32 | Providi9ng and fixing 15mm (fifteen milimetre) nominal bore to wall ceiling and floor galvanised mild steel tubes (light grade) tube fittings and clamps including making good the wall ceiling and floor , as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 33 | Providing and fixing 300x16mm (Three hundred into sixteen milimetres) oxidised Mild Steel sliding door bolts with nuts and necessary screws etcetera complete, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 34 | Providing and fixing 250x10mm ( Two hundred fifty into ten milimetres) oxidised Mild Steel Tower bolts black finish (Barrel type) with necessary screws etcetera complete as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing 125mm (one hundred twenty five milimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 36 | Providing and fixing 100mm (One hundred milimetre) diameter P.V.C. (D Plast) or equivalent rain water pipe, as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
