|
| 1 | Dismantling existing plaster including disposal ofrefuse as directed by Engineer-In-Charge within adistance of 60 meters. Pwd si no. 706 |
| 2 | Scrapping old white or colour wash includingdisposal of refuse as directed by Engineer-Inchargewithin a distance of 60 meters (200 feet) Pwd si no. 708 |
| 3 | Providing and laying cement concrete in 1:4:8 (1cement , 4C/sand 8 s/ballast in 40mm) and curing complete i/c cost of form work in foundation and floor as per PWD s.i.no.275a ch-5 |
| 4 | Brick work with common burnt clay FPS non modular brick of class designation-100 in superstructure above plinth level in 1:4 cement, c/sand Sor 6.4.2 |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars, piers,abutments, posts and struts etc. including cost of centering,shuttering, finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mmnominal size) as per dsr no.5.2.2 sr 7 |
| 6 | Steel reinforcement for RCC work i/c straightening, cutting, bending all complete as DSR no.-5.22.6 CH-10 |
| 7 | 12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) in 1:3 cement, c/sand pwd si no. 583 |
| 8 | 20 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) in 1:3 cement, c/sand pwd si no. 590 i |
| 9 | Providing and laying cement concrete in 3:1.5:1 of not less than strength of M-15 stone Ballast (20mm nominal size) approved coarse sand and cement, curing complete, including cost of form work. In Foundation and floors. S.I.No. 4.1.2 |
| 10 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete i/c cost of all material, labour T&P etc complete required for proper completion of the work as per DSR no.13.80 ch-15 |
| 11 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. includingcost of all material, Labour, T&P etc. complete required for proper completion of the work. as per DSR no.13.26 ch-15 |
| 12 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm si no.20 new |
| 13 | Providing and fixing on wall face unplasticised RigidPVC rain water pipes conforming to IS : 13592 TypeA, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion,110mm dia DSR no. 12.41.2. (pwd si no. 19) |
| 14 | Water Proofing Compound |
| 15 | P/F signboard of black granite plate in Brick masonary in Cement mortar i/c all complete Please Enable Macros to View BoQ information |
