|
| 1 | Excavation in soil in hilly area in all heights and depths in all kinds of soil including saturated soil comprising of mixed soil, ordinary rock and hard rock. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damages to hill side, water pollution etc. and to protect stability of hill side .Rock shall be excavated with chiseling and wedging out of rock (where blasting is prohibited) .All earth work in cutting/excavation including rock excavation shall be carried out true to lines ,grades, sides slopes, width, camber, super-elevation and level as shown on the drawing and as directed by the Engineer-in-Charge in conformity with the requirement of MoRD technical specification for Rural Road, Section. 300 & 1600 to achive designed formation width including hauling and stacking of materials useful for construction at suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its levelling, fine dressing and carriage of machineries, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. During the mobilisation period, contractor should take the advanced x-sec in 15 m interval of whole road length in the presence of Engineer-in-charge or his representative. In case the advanced x-sec has been taken in the presence of Engineer-in-Charge representative, in that case the same has to be got approved from Engineer-in-Charge. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account,filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer in-charge for smooth riding.The recovery for stones, whether useful or 1333.34 cum. In all cases, @ Rs. 300/-only per Cum. Shall be affected on prorta basis. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all cases. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST |
| 2 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- In – Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water ) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer in-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 3 | Providing and laying concrete for plain/ reinforced concrete 1:5:10(One cement: five sand : ten graded stone aggregate nominal size in open foundation complete as per drawing and technical Specification Clause 802, 803, 1202 and 1203 and as per directions of the Engineer-In-Charge including curing, cost fo form work and carriage of materials through all modes of transportation within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 4 | Back filling behind abutment, wing wall and return wall and retaining wall with granular material complete as per drawings and MORD technical specification Section 1200 &1600 including carriage of materials with in all leads and lifts and as per the direction of Engineer-in Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 5 | Providing weepholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimetre) Dia (inner dia) PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and MoRD technical specifications section 1200 and as per entire satisfaction, direction by Engineer-In-Charge and including carriage of materials with in all leads and lifts. The rate is including octroi, Royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 7 | Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 In 1:4 cement mortar and as per directions of the Engineer-In-Charge including curing and carriage of materials through all modes of transportation within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 8 | Construction of dry rabble masonry for retaining walls, breast walls, revetment walls and parapets etc. for sub structure and super structure complete as per drawing and technical specification clauses 704.6 and 1302.5 and as per directions of the Engineer-In-Charge including carriage of materials through all modes of transportation within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 9 | Providing and Laying cement concrete 1:2.5:5 ( 1 cement :2.5 Sand :5 graded stone aggregate) M-15 design mix with minimum cement contents not less than 275 (two hundred seventy five) kilograme per cubic meter and curing complete including the cost of Farm work with steel plates and filled by bitumen drums in dressiest as per drawing and HPPWD technical specifications and MORTH Specification section 800 and as per directions of the Engineer-In-Charge including curing and carriage of materials through all modes of transportation within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 10 | Providing and laying concrete mechanically mixed and vibrated PCC M-10 design mix with minimum cement contents not less than 250 (two hundred fifty) kilograme per cubic meter (1:3:6 Nominal mix) with 20mm(twenty millimetre) nominal size for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royalty, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 11 | Providing and erecting W metal beam crash barrier comprising 3 mm thick corrugated sheet metal beam rail 70 cm above road/ground level fixed on ISMC series Channel vertical part of 150 mmx75 mmx 5 mm special 2.00 metre center to center 1.80 metre high 1.10 metre below ground road level all steel parts and filaments to be galvanized by hot dip process, a fitting to confirm to IS 1367 and IS-1364 metal beam rail to be fixed on the vertical post with a space of channel section 150 mmx75 mmx5 mm 330 mm long complete as per MORTH Specification section 800 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, Royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 12 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with in all lifts and leads, transporting to site, spreading, grading by mechanical means to required slope and compacted with three wheel 80-100 (eighty - hundred) kN static roller to meet requirement of Table 300.2 complete as per MORD technical Specification section 300 & 1600 and as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 13 | Construction of granular sub-base by providing well graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site and spreading in uniform layers with motor grader on prepared surface and compacting with smooth wheel roller to achieve the desired density, complete as per MORD Technical Specification Clause 401 and as per directions of The Engineer-in- charge including carriage of materials through all modes of transportation within all leads and lifts and other incidents. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 14 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 and as per directions of The Engineer-in- charge including carriage of materials through all modes of transportation within all leads and lifts and other incidents. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 15 | Prime coat with Nanotechnology: Preparing and applying of water soluble oregano silane nanotechnology (for bitumen emulsion application, IRC approved) with cationic bitumen emulsion CSS1 and water (<1000 ppm TDS) in the ratio of 1 kg organo silane nanotechnology : 100 kg cationic bitumen emulsion CSS1 : 200 liter water . Mixing & Spraying : Take 1 kg of organo silane nanotechnology and add in 200 liter water while filling water in tanker/drum and then add 100 kg cationic bitumen emulsion under circulation. Mix the solution completely. Spray the solution @ 1 liter per sqm on compacted stone base. Rates including all materials, labour, hire Charges of machery etc . including haulaging of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 16 | Tack Coat with Nanotechnology: Preparing and applying of water soluble organo silane nanotechnology (for bitumen emulsion application, IRC approved) with cationic bitumen emulsion CRS1 and water (<1000 ppm TDS) in the ratio of 1.4 kg organo silane nanotechnology : 100 kg cationic bitumen emulsion CSS1 : 200 liter water . Mixing & Spraying : Take 1.4 kg of organo silane nanotechnology and add in 200 liter water while filling water in tanker/drum and then add 100 kg cationic bitumen emulsion under circulation. Mix the solution completely. Spray the solution @ 0.375 liter per sqm on compacted stone base. Rates including all materials, labour, hire Charges of machery etc. complete as per MoRD specifications & direction of Engineer-in-Charge. Mixed the solution completely . Spray the solution @ 0.375 litre per sqm on compacted stone base . Rates including all materials, labour ,hire charges of machinery etc. including haulaging of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 17 | Providing, laying and rolling of Cold Mix close-graded premix surfacing material of 25 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) aggregates using penetration grade bitumen emulsion SS-2 @ 30 (thirty) kilograme per ten square meter to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per technical specification IRC:SP:100-2014 including haulaging of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax and any other taxes imposed by the Government but excluding GST. |
| 18 | Construction of plastic cell filled cement concrete pavement, thickness as per design, over a prepared sub base, with 53 grade Ordinary Portland Cement (OPC) or any other type as per Clause 1501.2.4 M30 (Grade). Coarse and fine aggregates conforming to IS : 2386, maximum in a concrete mixer of not less then 0.2 cum capacity and appropeiate weigh batcher using approved mix design(As per IRC 44-2088, laid in approved fixed side formwork (Steel channel, wedges, Steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed an plate vibrators and finished in continuous operation, Concrete should have a slump of 30-50MM with use of approved plasticizer if required. Formwork of plastic cells should be made of High Density Polyethylene (HDPE), sheets having thickness ranging from 0.20-0.22MM with sides 150MMx150MM and height as fixed by engineer in charge. Cells should be stitched using thread, thus ensuring optimum joint strength. Joint strength should be a minimum of 2 Kilo Newton per metre. Heat welded cells should not be procured as they are not able to withstand the tension and often break when they are laid in the full width of the carriageway. Iron spikes of about 200MM long are to be used to keep the cell walls taut. Nylon thread or rope may be used to prevent collapse of cells during placement of concrete. Iron spikes to be taken out for use in other place as soon as the concrete is in place. The subbase should be provided with concrete/stone block or brick on edge on either side of the carriageway protecting the subbase with full thickness of the concrete pavement for its confinement and protection. Curing of concrete slabs for 14 - days, curing compound ( where specified) and water finishing to lines and grade as per drawing and Technical Specification of cell filled Concrete Pavement Published by NRRDA. including haulaging of material in all leads, lifts as per the entire satisfactions and direction of Engineer-in-Charge. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 19 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MORD Technical Specification Clauses 802, 803, 1202 and 1203. Plain Cement concrete Nominal mix 1:4:8 and as per directions of the Engineer-In-Charge including curing, cost of form work and carriage of materials through all modes of transportation within all leads and lifts and other incidentals. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 20 | Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP3 (Non Pressure-three) of 1000 (One thousand) milimetre internal dia metre for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is to two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST |
| 21 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRD Technical Specification Clauses 802, 803, 1202 and 1203. Plain Cement concrete Nominal mix 1:6:12 and as per directions of the Engineer-In-Charge including curing, cost of form work and carriage of materials through all modes of transportation within all leads and lifts and other incidentals. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 22 | Providing and laying mechanically mixed and vibrated cement concrete in foundation using grade M-20 ( M-Twenty) design mix with cement contents not less than 350 kg (three hundred fifty kilogram) per cubic metre with 20mm(Twenty milimetres) nominal size graded crushed stone aggregate as per drawings and M.O.R.D. technical section 800, 900 and 1200 and 1600 including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block and dirt wall etcetra and curing complete including carriage of materials with in all kinds of leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 23 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorized panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings. including hauling of material in all leads lift as per the entire satisfaction and direction of Engineer-in charge. The rate is including octroi, royality, malkana toll tax and other taxes imposed by the Government but excluding GST. |
| 24 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be paintedThe rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. with primer and two coats of epoxy paint as per drawing & MORD Specification section 1700 and Annexure 1700.1 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 25 | Providing and fixing of retro-reflectorized cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminum sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701 including hauling of material in all leads lift as per the entire satisfaction and direction of Engineer-in charge. The rate is including octroi, Royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST.. |
| 26 | Providing & fixing Road Cat Eyes complete as per drawing and including hauling of material in all leads lift as per the entire satisfaction and direction of Engineer-in charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 27 | Reinforced cement concrete M-15 (M-fifteen) grade Ordinary Kilometer Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 28 | Reinforced cement concrete M-15 (M-fifteen) grade 200m (two hundred metre) Stone (Precast) of standard design as per IRC :8 fixing in position including painting and printing etcetera as per drawing and MORD technical specification section 1700 and as per the directions of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. |
| 29 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including hauling of material in all leads lift as per the entire satisfaction and direction of Engineer-in charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 30 | Providing and fixing of \\"Citizen Information board\\" as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. All M.S. will be stove enamelled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing including hauling of material in all leads lift as per the entire satisfaction and direction of Engineer-in charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 31 | Geosynthetic mat for control of erosion of slopes including hauling of material in all leads lift as per the entire satisfaction and direction of Engineer-in charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 32 | Part-II:- Routine maintenance after completion of construction work as per term and condition of bid document and technical specification of ministry of rural development and rural roads including hauling carriage of all labour , equipment and materials to various location through all modes of transportations, all leads, lifts to the entire satisfaction of the Engineer-in-Charge. |
| 33 | For 1st year |
| 34 | For 2nd year |
| 35 | For 3 rd Year |
| 36 | For 4th Year |
| 37 | For 5th Year Please Enable Macros to View BoQ information |
