|
| 1 | Almirah large/medium steel (FD-1031, 1032, 1033 and 1034) |
| 2 | M & L for removing unsv Leg by Supply and fix new leg of almirah large/medium steel made of 1mm thick M S sheet size all as per drg and duly spray painted with synthetic enamel paint two coats over a coat of red oxide primer.(colour of shade as per directed by Engr-in-charge) |
| 3 | M & L for removing unsv lock by Supply and fix new lock brass 4 lever of approved best quality with duplicate key for almirah Large/medium steel all as directed by Engr-in-Charge. (Make - as per sample approval) |
| 4 | M & L for removing unsv handle by Supply and fix new handle mild steel CP 125mm long S Type as per sample for almirah large/medium steel all as directed and shown on drg. |
| 5 | M & L for removing unsv Shelf by Supply and fix new shelf of almirah large/medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 6 | M & L for removing unsv locking device by Supply and fix new locking device and cover of device as per existing for almirah medium steel including re-fixing of disconnect shelf with stay hook/revetting all as directed by Engr-in-Charge. (FD-1032). |
| 7 | All as per Srl. Item No. 1.05 here-in-before but almirah large Steel. |
| 8 | M & L for removing unsv door shutter by Supply and fix new door shutter of almirah medium steel, made of M.S sheet 1mm thick bend to shape and size as shown on drg. |
| 9 | All as per Srl. Item No. 1.07 here-in-before but almirah large Steel. |
| 10 | Teapoy Varandah (FD-255) |
| 11 | M & L for removing unsv top by S & F new top of teapoy size 900 x 450 mm made out of prelaminated particle board 18/19mm thick exterior grade confirming to IS of Make : (As per particular specification) with alround teak wood beading 4mm wide all as per shown on drawing. |
| 12 | M & L for removing unsv Leg frame by S & F new legs frame of teapoy verandah with U Type 20mm dia MS round pipe 1.6mm wall thickness all as per specified and shown on drg. |
| 13 | Table 900x600x760mm with/without drawers and 900x900x760mm steel (FD-1007,FD-1008 and FD-1009, CCE/KLP/12) |
| 14 | M & L for removing unsv top by S & F new top of table 900 x 600 x 760mm with/without drawers steel with 18/ 19mm thick pre-laminated particle board exterior grade one side teak face edging alround teak wood beading 4mm wide all as shown on drg and directed by Engineer -in-Charge. Make : (As per particular specification) |
| 15 | All as per Srl. item No. 3.01 but Table 900x900x760mm Steel. |
| 16 | M & L for removing unsv legs and stiffners by Supply and fix new legs and stiffeners of table Steel 900 x 600 x 760mm with/without drawers and 900x900x760mm made of 25mm square conduit pipe 1.6mm wall thickness duly electric welding complete size and shape all as shown on drg and directed by Engr-in-Charge. |
| 17 | M & L for removing unsv H type stiffner by Supply and fix new H type stiffener of table 900 x 600 x 760mm with/without drawers steel for jointing legs of 25mm square conduit pipe of 1.6mm wall thickness shall be welded to support the legs of the table at appropirate height as directed by Engineer-in-Charge. |
| 18 | M & L for removing unsv drawer by Supply and fix new drawer of table 900 x 600 x 760mm with drawers made out of 1mm thick MS sheet size and shape all as specified and shown on drg. |
| 19 | M & L for removing unsv lock by Supply and fix new lock brass of table 900x600x760mm with drawers with duplicate key for four leaver size and shape all as specified and shown on drg. Make : (As per particular specification) |
| 20 | Charpoy GI Hard Ply Top (FD-220) |
| 21 | M & L for removing unserviceable long rail of charpoy by S & F new 32mm GI pipe long rail of Make : (As per particular specification) confirming to IS duly threaded at both end as required and fixing including tightening the frame work all as shown on drawing. |
| 22 | M & L for removing unserviceable check nut of charpoy by S & F new 32mm GI check nut of Make : (As per particular specification) confirming to IS incl tightening the frame work all as shown on drawing and as directed. |
| 23 | M & L for removing unserviceable GI 3way elbow of charpoy by S & F new 32mm GI 3way elbow of Make : (As per particular specification) confirming to IS incl tightening the frame work all as shown on drawing and as directed. |
| 24 | Labour only for making short rails from the unserviceable long rail parts under item No. 4.01 above including cutting and threading at the both ends and fixed in position complete all as per drg and as directed by Engr-in-Charge. |
| 25 | Labour only for making leg from the unserviceable short rail under item no 4.04 above including cutting and threading at one end and another side new 3mm thick MS sheet base plate welded at bottom fixed in position all complete as per drg and directed by Engr-in-Charge. |
| 26 | M & L for removing unsv plywood and S & F plywood commercial 12mm thick BWP grade ISI marked of Make : (As per particular specification) of size size 1980x900mm all as directed by Engr-in-Charge. |
| 27 | Bed Hard Steel (FD/E6/MAP/08(R) |
| 28 | M & L for removing unserviceable ply by Supply and fix new plywood of size 1980x900x12mm thick BWR grade with steel Nut bolt of Bed Hard Steel as per IS:303 all as directed by Engr-in-Charge.(Make of plywood- (As per particular specification) |
| 29 | M & L for removing unserviceable Head bard by Supply and fix new Head board made out of 19mm thick prelaminated particle board exterior grade with PVC beading all round all as directed by Engr-in-Charge. (Make of As per particular specification) |
| 30 | All as per ser No 5.02 here-in-before but foot board of Bed Hard Steel. |
| 31 | M & L for removing unserviceable Shoe by Supply and fix new Hard rubber shoes for Bed hard Steel size 25x25mm square and best quality all as directed by Engr-in-Charge. |
| 32 | M & L for tightening to Bed Hard Steel with electric welding complete including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. |
| 33 | Material and Labour for painting to frame of Bed Hard Steel with synthetic enamel black paint including preparation of surface with rubbing with emery paper to bed hard steel all as specified and directed by Engr-in-Charge. |
| 34 | Charpoy MS Pipe (IP Steel) (FD/MAP-II/01) |
| 35 | M & L for removing unserviceable Ply by Supply and fix new plywood of size 1980x900x12mm thick BWR grade with steel screw of Charpoy MS Pipe as per IS:303 all as directed by Engr-in-Charge including removing unserviceable plywood. (Make of As per particular specification) |
| 36 | M & L for removing unserviceable Shoe by Supply and fix Hard rubber shoes for Charpoy MS Pipe size 25x25mm square and best quality all as directed by Engr-in-Charge. |
| 37 | M & L for tightening to Charpoy MS Pipe with electric welding complete including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. |
| 38 | Material and Labour for painting to frame of Charpoy MS Pipe with synthetic enamel black paint including preparation of surface with rubbing with emery paper to Charpoy MS Pipe all as specified and directed by Engr-in-Charge. |
| 39 | Chair School with hand board (FD/E6/MAP/05) |
| 40 | M & L for removing unserviceable hand board by Supply and fix new hand board size 585mmx300mm with one side prelaminated particle board top openable with PVC edging and screwed to 25mm dia mild steel all as specified and directed by Engr-in-Charge. |
| 41 | M & L for removing unserviceable seat by Supply and fix new one piece PVC seat and back of size 432x330mm (Bucket type Seat) as shown on drg and directed by Engr-in-Charge. |
| 42 | M & L for electric welding point upto exec 10mm to 25mm to the broken joints of Chair school wherever required including preparation of surfaceand removing the unwanted welding spot all as directed by Engineer-in-Charge. |
| 43 | M & L for removing unserviceable Shoe by Supply and fix new Hard rubber shoes best quality for Chair school size as per drg and all as directed by Engr-in-Charge. |
| 44 | Filling Cabinet 4 drawer steel (TP) |
| 45 | M & L for removing unserviceable Telescopic channel by Supply and fix new telescopic channel of drawer size and make all as directed by Engr-in-Charge. |
| 46 | M & L for removing unserviceable Lock by Supply and fixi new lock brass 4 lever of approved best quality with duplicate key all as specified and directed by Engr-in-Charge. (Make:- As per particular specification) |
| 47 | Table bed side MAP(FD/E6/MAR/15(R) |
| 48 | M & L for removing unserviceable top by Supply and fix new top of table bed side of size 450x450mm of 18/19mm thick prelaminated particle board exteriror grade including PVC beading alround all as shown on drg. ( Make of pre-laminated particle board:- As per particular specification) |
| 49 | All as per Srl. Item No. 9.01 here-in-before but as in sides of table bed side of size as all as shown on drg |
| 50 | All as per Srl. Item No. 9.01 here-in-before but as in front sides of upper drawers of table bed side of size 450x100mm. |
| 51 | All as per Srl. Item No. 9.01 here-in-before but front sides of lower drawers of table bed side.of size 450x350 |
| 52 | M & L for removing unserviceable back ply by Supply and fix new back plywood 6mm thick MR Gde of table bed side of size 450x500mmwith all as shown on drg. (Make:- As per particular specification) |
| 53 | All as per Srl. Item No. 9.05 here-in-before but as in bottom plywood of drawer of size 450x450mm of table bed side. |
| 54 | M & L for removing unserviceable ply by Supply and fix new 12mm thick MR Gde plywood as in all sides plywood of upper drawer of table bed side all as shown on drg and as directed by Engr-in-Charge. |
| 55 | All as per Srl. Item No. 9.07 here-in-before but 12mm thick Moisture Resistant Gde plywood as in all sides of lower drawer of table bed side all as shown on drg and as directed by Engr-in-Charge. |
| 56 | M & L for removing unserviceable leg & stiffner Supply and fix new legs & stiffeners of table bed side made out of 18mm square conduit pipe to be welded with bias electric welding all as specified shown on drg and as directed by Engr-in-Charge. |
| 57 | M & L for removing unserviceable CP handle 75 mm long Supply and fix new CP handle 75mm long of table bed side with steel screw all as shown on drg and as directed by Engr-in-Charge. |
| 58 | M & L for removing unserviceable Shoe by Supply and fix new Hard rubber shoes best quality for Table Bed side (MAP) size as per drg and all as directed by Engr-in-Charge. |
| 59 | Locker bed side steel (FD-257) |
| 60 | M & L for removing unserviceable hasp & staple by Supply and fix new hasp and staple mild steel chromium plated 75mm long of Locker bed side Steel all as shown on drg. |
| 61 | M & L for removing unserviceable socket by Supply and fix new mild steel chromium plated socket for fixing 19mm dia conduit pipe hanging rod, all as specified and shown on drg and all as directed by Enge-in-Charge. |
| 62 | M & L for removing unserviceable handle by Supply and fix new mild steel chromium plated handles 100mm long 'C' type and all as shown on drg. |
| 63 | M & L for removing unserviceable hanging rod by Supply and fix new hanging rod 19mm dia 1.0mm wall thickness conduit pipe of SS of length 380mm approx all as specified and all as shown on drg. |
| 64 | M & L for removing unserviceable shutter by Supply and fix new door shutter of locker bed side steel made of 1mm thick M.S sheet of bend to shape shape and all as per drg complete. |
| 65 | M & L for removing unserviceable leg by Supply and fix new legs of locker bed side steel made of 1mm thick M.S sheet of bend to shape and all as per drg complete. |
| 66 | M & L for removing unserviceable hinge by Supply and fix new 75mm long MS hinges to door shutter of locker bed side steel including revetting all as directed by Engr-in-Charge. |
| 67 | Book Case Steel (FD-1028) |
| 68 | M & L for removing unserviceable shutter by Supply and fix new door shutter of book case steel made of 1mm thick M.S Sheet and complete all as shown on drg and directed by Engr-in-Charge. (FD-1028) |
| 69 | M & L for removing unserviceable Lock by Supply and fix new lock of book case steel all as directed by Engr-in-Charge. (Make of Lock:- As per particular specification) |
| 70 | M & L for removing unserviceable handle by Supply and fix new handle of made of CP 100mm long. (FD-1028) |
| 71 | Form without/with back (FD-77(M) & FD-1027) |
| 72 | M & L for removing unserviceable Seat by Supply and fix new seat of form without back of size 1525 x 255mm made out of 25mm thick prelaminated particle board exteriror grade including PVC beading alround including nuts, bolts & rubber shoes all as specified and shown on drg. (Make of pre-laminated particle board:- As per particular specification) |
| 73 | All as per item No. 12.01 here-in-before but back of form with back of size 1525 x 150mm |
| 74 | Table Office clerk steel/Table office officer steel (FD-381, FD-1004, FD-1002 and FD-1004, CCE/KLP/67) |
| 75 | M & L for removing unserviceable Top by Supply and fix new top of table office clerk steel with top made of 18/19mm thick pre-laminated particle board exterior grade with 4mm thick teak wood beading alround of size 1220x730mm all as shown on drg and directed by Engr-in-Charge. (Make of pre-laminated particle board:- As per particular specification) |
| 76 | All as per item No 13.01 here-in-before but top of table office officer of size 1830 x 915mm. |
| 77 | M & L for removing unserviceable drawers by Supply and fix new drawer of table office officer/clerks steel shape made out of 1mm thick MS sheet size and shape all as specified and shown on drg. |
| 78 | M & L for removing unserviceable lock by Supply and fix new brass lock 4 lever of table office officers/ clerks steel of approved best quality with duplicate keys all as specified. (Make As per particular specification) |
| 79 | Table dinning OR (FD-165(M)) |
| 80 | M & L for removing unserviceable Top by Supply and fix new of top of table dinning ORs with made out of 19mm thick Block board plywood covered with 1.0mm thick 22 gauge aluminium sheet all as per drg and specified.(Make of materials As per particular specification) |
| 81 | M & L for removing unserviceable legs by Supply and fix new legs of table dinning ORs with made out of 25mm square conduit pipe 16 guage electric welding all as specified and shown on drg. (FD-165(M). |
| 82 | Table centre brass frame glass top (FD-375) |
| 83 | Supply and fix of 10mm thick tinted glass of size 1200mm x 600mm table centre brass frame, including machine polished to all sides in smoke colour sheds all as shown on drg and as directed by Engr-in-Charge. |
| 84 | M & L for polishing to frame of Table Centre with brasso (Pitambri) including preparation of surface with rubbing with emery paper and providing 04 Nos PVC Vaccum rubber shoes at top of legs of Table Centre all as specified and as directed by Engr-in-Charge. |
| 85 | Charpoy IP folding with hard top (FD-388(R)) : |
| 86 | M & L for removing unserviceable ply by Supply and fix new plywood BWR Gde as per IS:303 of size 1980 x 900 x 12mm thick (Make of plywood- As per particular specification) |
| 87 | Material and Labour for painting to frame of Charpoy IP folding with synthetic enamel black paint including preparation of surface with rubbing with emery paper all as specified and directed by Engr-in-Charge. |
| 88 | Chair Computer (TP) |
| 89 | M & L for removing old unsv Gas Lifter/hydraulic assembly by S & F new gas lift/hydraulic assy as per sample inculding tighting the frame work etc. Model No Trade Pattern |
| 90 | M & L for removing old unsv Poly Urathene Armrest by S & F new arm rest of superior quality as per sample including nut and bolts. Model No Trade Pattern |
| 91 | M & L for removing unsv pedestal assy by S & F new pedestal assy including tighting the frame work. Model No Trade Pattern |
| 92 | M & L for removing unsv castor wheel by S & F new castor wheel of superior quality including tighting the frame work. Model No Trade Pattern |
| 93 | M&L for removing old seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 94 | Chair Writing/Visitor Steel (TP) |
| 95 | M&L for removing old seat & back cover cloth and supply and fix new tapestry cloth not less then Rs 220/- per mtr for seat and back of superior quality as specified and directed by Engr-in-charge |
| 96 | Supply and fixing in replacement of arms of chair Writing/Visitor all as directed by Engr-in-Charge. |
| 97 | M & L for black painting to frame of Chair Writing/Visitorl with synthetic enamel paint of black colour and providing 04 nos rubber shoes to legs all as specified and as directed by Engr-in-Charge. |
| 98 | CHAIR CBA STEEL WITH ARMS FD-75 |
| 99 | (a) M&L for removing existing old unserviceable Seat and Back of Chair Steel Tubular with Arm (FD-75) and Welding MS FIat 11\\" x 2\\" and 4mm thick for seat (02 Nos) and Welding MS FIat 8\\" x 2\\" and 4mm thick for Back (02 Nos) on GI Tube frame work as per direction of Engr-in-charge.(b) Steel GI Tubing parts (frame Work) of chairs duly scrapping for removal of rust, dirt and Two coat of SE paint (colour or shades approved by Engr-in-Charge) (c) S&F Plywood 12mm thick commercial size 18\\" x 17\\" fixed on welded MS Flat (Iron) with the help of suitable Nut & Bolt with washer for a seat and paste 50mm U Foam (Cushion) on plywood for cushioning of Seat coverd with tepestry cloth and black cloth linen at bottom side with the help of suitable stappler pin and upholstery work .(d) S&F Plywood 12mm thick commercial size 18\\" x 15½\\" fixed on welded MS Flat (Iron) with the help of suitable Nut & Bolt with washer for a Back and paste 50mm U Foam (cushion) on plywood for cushioning of Back coverd fully with tepestry cloth with the help of suitable stappler pin and upholstery work .Note : Tepastry cloth (Not less than 220/- per mtr) as per sample kept in BSO Yard or shades approved by Engr-in-Charge and after preparation of seat and back same covered with packing plastic material (thin packing Plastic Roll) |
| 100 | Removing the broken seat and replacing it with new seat woven with 2mm wide plastic cane of primier /shah/Maharastra Polycane Industries brand as per Godrej pattern to be fixed with 04 Nos machine nuts and bolts of size 85x4 mm with washer to Chair CB Steel with arm/ without arm, frame of seat shall be made of best quality 2nd class seasoned hard wood ,free from knots and infection all as specified and shown on drg and shall be painted with two coats of black synthetic enamel paint over a coat of wood primier. (FD-75(M). |
| 101 | All as per Srl item No. 19.02 here-in-before but back of Chair CB Steel with arm/without arm.(FD-75(M). |
| 102 | M&L for removing old Arm by Supply and fix new arm to chair CB steel with arms made out of best quality 2nd class hard wood, free from knots, infection with 02 Nos steel screw as per drg duly painted with two coats of black synthetic enamel paint size as per Drg and as directed by Engr-in-Charge. |
| 103 | M & L for painting to frame of chair CB Steel with arms/withour arms with synthetic enamel olive green paint including preparation of surface with rubbing with emery paper and providing 02 Nos PVC cap at top of Back frame of MS pipe and 04 Nos PVC shoes with steel screw at bottom of frame of MS round pipe as specified and directed by Engineer-in-Charge. (FD-75(M). |
| 104 | M & L for spray painting to frame of Table 900x600x760mm with/without drawers steel with synthetic enamel paint of OG colour and providing rubber shoes to legs of table all as specified and as directed by Engr-in-Charge. (FD-1007 & 1008, CCE/KLP/12) |
| 105 | All as per item No 20 here-in-before but Table 900x900x760mm Steel. (FD-1009). |
| 106 | Spray painting to Almirah Medium Steel with synthetic enamel Olive Green spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting as required, complete all as specified and directed by Engineer-in-Charge. (FD-1032) |
| 107 | All as per Srl item No. 22 here-in-before but spray painting with synthetic enamel Olive Green paint externally portion only to almirah medium steel. (FD-1032) |
| 108 | Spray painting to Almirah Large Steel with synthetic enamel Olive Green spray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook as required, complete all as specified and directed by Engineer-in-Charge. (FD-1031). |
| 109 | All as per Srl item No. 24 here-in-before but spray painting with synthetic enamel Olive Green paint externally portion only to almirah Large steel. (FD-1031) |
| 110 | Material and Labour for painting to frame of teapoy varandah with synthetic enamel white paint including preparation of surface with rubbing with emery paper and providing of 04 Nos. rubber shoes to legs of teapoy.all as specified and directed by Engr-in-Charge. |
| 111 | Material and Labour for painting to frame of Rack shoe steel with synthetic enamel black paint including preparation of surface with rubbing with emery paper all as specified and directed by Engr-in-Charge. |
| 112 | M & L for spray painting to frame of form w/o back except seat planks with synthetic enamel paint of OG colour all as specified and as directed by Engr-in-Charge. (FD-77(M) & FD-1027). |
| 113 | All as per item No 28 here-in-before but form with back. (FD-78(M). |
| 114 | Spray painting to Locker bed side Steel with synthetic enamel Olive Green/siver Gray spray/Smoke Gray paint internaly and externaly, after removing of loose paint and providing putty after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook as required, complete all as specified and directed by Engineer-in-Charge. (FD-257, CCE/KLP/46) |
| 115 | All as per Srl item No. 30 here-in-before but spray paint with synthetic enamel Olive Green/siver Gray spray/Smoke Gray paint externally portion only to Locker bed side steel. (FD-257, CCE/KLP/46) |
| 116 | Spray painting to table office clerk steel except top with synthetic enamel Olive Green paint internaly and externaly, after removing denting & dust, preparation of surfaces by providing putty and red oxide primer where required complete and providing 04 Nos rubber shoes ot table all as specified and directed by Engineer-in-Charge. (FD-381 & 1004, CCE/KLP/67) |
| 117 | All as per Srl item 32 here-in-before but table office officer. (FD-1002 & 1003) |
| 118 | All as per Srl. Item No. 32 here-in-before but table dining ORs including providing of 04 Nos. rubber shoes to legs of table. (FD-165(M). |
| 119 | Removing dents from the surface and applying two coats of synthetic enamel Gray paint to Book Case Steel complete all as directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
