|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level DSR 4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR 4.1.3 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4 |
| 4 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. DSR 6.13 |
| 6 | Cement mortar 1:3 (1 cement :3 coarse sand) DSR 6.13.1 |
| 7 | 12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7 |
| 8 | 1:3 (1 cement: 3 fine sand) DSR 13.7.1 |
| 9 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 |
| 10 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels DSR 8.2 |
| 11 | Granite of any colour and shade DSR 8.2.2 |
| 12 | Area of slab over 0.50 sqm DSR 8.2.2.2 |
| 13 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : DSR 9.95 |
| 14 | 125x63x4 mm DSR 9.95.2 |
| 15 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : DSR 9.96 |
| 16 | 250x16 mm DSR 9.96.2 |
| 17 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : DSR 9.97 |
| 18 | 150x10 mm DSR 9.97.4 |
| 19 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete DSR 9.100 |
| 20 | 100 mm DSR 9.100.2 |
| 21 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : DSR 21.1 |
| 22 | Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR 21.1.1.2 |
| 23 | Providing and fixing ISI Marked water proof 30 mm thick flush door shutters of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant , eco friendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848;complete in all respect. Please Enable Macros to View BoQ information |
